Helmsman

Last updated
The bridge of the freighter shown here has two steering stands. This redundancy is a safety measure in case one of the steering mechanisms that control the ship's rudder fails. Scross helmsman.jpg
The bridge of the freighter shown here has two steering stands. This redundancy is a safety measure in case one of the steering mechanisms that control the ship's rudder fails.

A helmsman or helm (sometimes driver or steersman) is a person who steers a ship, sailboat, submarine, other type of maritime vessel, or spacecraft. The rank and seniority of the helmsman may vary: on small vessels such as fishing vessels and yachts, the functions of the helmsman are combined with that of the skipper; on larger vessels, there is a separate officer of the watch who is responsible for the safe navigation of the ship and gives orders to the helmsman, who physically steers the ship in accordance with those orders.

Contents

In the merchant navy, the person at the helm is usually an able seaman, particularly during ship arrivals, departures, and while maneuvering in restricted waters or other conditions requiring precise steering. An ordinary seaman is commonly restricted to steering in open waters. Moreover, military ships may have a seaman or quartermaster at the helm.

A professional helmsman maintains a steady course, properly executes all rudder orders, and communicates to the officer on the bridge using navigational terms relating to ship's heading and steering. A helmsman relies upon visual references, a magnetic and gyrocompass, and a rudder angle indicator to steer a steady course. The mate or other officer on the bridge directs the helmsman aboard merchant or navy ships.

Clear and exact communication between the helmsman and officer on the bridge is essential to safe navigation and ship handling. Consequently, a set of standard steering commands, responses by the helmsman, and acknowledgment by the conning officer are widely recognized in the maritime industry. The helmsman repeats any verbal commands to demonstrate that the command is heard and understood. The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW) requires that a helmsman be able to understand and respond to helm orders in English. [1]

The proliferation of autopilot systems and the increased computerization of operations on a ship's bridge lessen the need for helmsmen standing watch in open waters.

Helm commands

Helm orders or commands fall into two categories: rudder commands and heading commands. A rudder command dictates changing the angle of the rudder, which is a single-event action, whereas steering a heading is a comparatively long event and will require ongoing or continuous rudder adjustments.

The following are helm orders used in the United States Navy and United States Coast Guard: [2]

Rudder

Heading

Acquired skills

Navy sailors at the helm of an aircraft carrier in December 2001. 011212-N-1328C-502 At the Helm.jpg
Navy sailors at the helm of an aircraft carrier in December 2001.

Steering a ship effectively requires skills gained through training and experience. An expert helmsman has a keen sense of how a particular ship will respond to the helm or how different sea conditions impact steering. For instance, experience teaches a helmsman the ability to correct the rudder in advance of a ship substantially falling off course. This requires the capacity to anticipate the delay between when the helm is applied and when the ship responds to the rudder. Similarly, a skilled helmsman will avoid overcompensating for a ship's movement caused by local conditions, such as wind, swells, currents, or rough seas.

Ship simulators

A ship bridge simulator with 3-D graphics creates scenarios with realistic sights and sounds to train mariners in ship handling. US Navy 070314-N-4965F-012 Quartermaster 1st Class Micky Young, assigned to Afloat Training Group Middle Pacific (ATG MIDPAC), operates the Navigation, Seamanship and Shiphandling Trainer (NSST) master control station.jpg
A ship bridge simulator with 3-D graphics creates scenarios with realistic sights and sounds to train mariners in ship handling.

Computer-based ship simulators provide a training environment for learning skills to steer a ship. Training can be programmed to replicate a variety of ship sizes and environmental conditions. Scenarios depicted in 3-D graphics range from making course corrections in open waters to maneuvering in port, rivers, or other shallow waters. Cost compared to a real vessel is low. Mariners learn responses to dangerous situations, such as steering failure, in the safety of a virtual environment.

Land-based ship simulators may feature a full-scale replica of a steering stand with a ship's wheel. Such simulators incorporate magnetic and gyro compasses (or repeaters) for steering. Moreover, a rudder angle indicator that responds appropriately to the helm is part of the configuration.

However technology also allows for a multitude of smaller workstations in a classroom setting. Administrators network student workstations so that the instructor can launch individual scenarios at each station. Computer models are used to accurately simulate conditions such as wind, seas, and currents. Moreover, shallow-water effects or other hydrodynamic forces, such as ships passing close to each other, can also be depicted. A computer application records training sessions, complete with voice commands issued by the instructor which are received by the students via a headset.

On the job training

Underway replenishment during which an oil tanker refuels ships at sea demands that the helmsman steer an extremely precise course. US Navy 050614-N-0120R-050 The conventionally powered aircraft carrier USS Kitty Hawk (CV 63) and the guided missile cruiser USS Cowpens (CG 63) receives fuel during a replenishment at sea.jpg
Underway replenishment during which an oil tanker refuels ships at sea demands that the helmsman steer an extremely precise course.

On-the-job training at sea is critical to a helmsman developing ability to "sense" or anticipate how a ship will respond in different conditions. The experienced helmsman uses measured responses to sea conditions, even when encountering heavy weather that may cause a ship to pitch and roll as it pounds its way through oncoming waves. Subsequently, the helmsman learns to relax and take into account the vessel's natural rhythm in order to avoid oversteering whatever the maritime environment. Consequently, more accurate steering is attained with less rudder. Applying the minimal rudder required to steer a course reduces drag of the ship, thereby favorably impacting the ship's speed and operating costs.

One of the helmsman's most important duties is steering a ship in a harbor or seaport when reduced speeds slow a ship's response to the rudder. For it is during ship arrivals and departures, when most ship collisions or groundings occur. [3] Clear communication, then, between the officer of the bridge and the helmsman is essential for safe operations. The officer or harbor pilot relies upon the helmsman to flawlessly execute steering commands to avoid a variety of hazards, including man-made obstacles, land formations, grounding in shallow waters, and the threat of collision with other vessels. In addition, powerful sea tides and river currents encountered in seaports heighten navigation dangers, as a ship's ability to stop is severely limited.

Relieving the helm

Helmsmen of merchant and military ships that are underway stand watch at the helm for a set period of time before being relieved by another watchstander. The person being relieved will complete any course change or other critical maneuver that is in progress before handing over the helm.

Merchant vessels

Helmsman on the bridge of a container ship on river trip. The helmsman steers to instruction of the pilot, under the captain's control. Up the river Elbe, on the bridge of the container ship OOCL Montreal, 4402 TEU - 2009.jpg
Helmsman on the bridge of a container ship on river trip. The helmsman steers to instruction of the pilot, under the captain's control.

The helmsman handing over the helm will inform the relief helmsman of any rudder commands in place and pertinent conditions. "Steering 180. We have oncoming traffic two points on the starboard" for example. In addition, the current helmsman should inform the relief if there are any peculiarities affecting steerage. Similarly, the helmsman will also point out if he or she is steering on a landmark, range, or navigational light. The relief helmsman is obligated to repeat the course being steered or other rudder command in order to demonstrate an understanding of the situation at the helm.

On merchant ships, it is taught at the various maritime academies that the proper way to relieve the helm is for the helmsman being relieved to call out loudly the ship's course per gyro, course per standard magnetic compass, steering mode, rudder angle, and the pump the vessel is steering off of. The relief helmsman will then take the helm and repeat all the information to ensure that he/she knows what to steer while on watch. An example of this would be:

Helmsman: "Helm is being relieved... steering two-four-eight per gyro, checking two-four-five per standard. Helm is in hand, rudder amidships, steering off the port pump."

Relief: "Helm has been relieved... steering two-four-eight per gyro, checking two-four-five per standard. Helm is in hand, rudder amidships, steering off the port pump."

The officer on watch will usually reply with "very well."

See also

Notes

  1. "Approval of programs leading to certification as a rating forming part of a navigational watch". United States Coast Guard National Maritime Center. U.S. Department of Transportation. Archived from the original on 3 May 2001. Retrieved 6 August 2019.
  2. Noel, John V. Jr. (1991-01-16). Knight's Modern Seamanship. John Wiley & Sons. pp. 259–260. ISBN   978-0-471-28948-7.
  3. Frittelli, John (February 8, 2008). "Ship navigation in harbors: safety issues" (PDF). U.S. Congressional Research Service . Archived from the original (PDF) on 28 May 2008. Retrieved 6 August 2019.

Related Research Articles

<span class="mw-page-title-main">Seamanship</span> Art, knowledge and competence of operating a craft on water

Seamanship is the art, knowledge and competence of operating a ship, boat or other craft on water. The Oxford Dictionary states that seamanship is "The skill, techniques, or practice of handling a ship or boat at sea."

<span class="mw-page-title-main">Rudder</span> Control surface for fluid-dynamic steering in the yaw axis

A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, airship, or other vehicle that moves through a fluid medium. On an airplane, the rudder is used primarily to counter adverse yaw and p-factor and is not the primary control used to turn the airplane. A rudder operates by redirecting the fluid past the hull or fuselage, thus imparting a turning or yawing motion to the craft. In basic form, a rudder is a flat plane or sheet of material attached with hinges to the craft's stern, tail, or after end. Often rudders are shaped so as to minimize hydrodynamic or aerodynamic drag. On simple watercraft, a tiller—essentially, a stick or pole acting as a lever arm—may be attached to the top of the rudder to allow it to be turned by a helmsman. In larger vessels, cables, pushrods, or hydraulics may be used to link rudders to steering wheels. In typical aircraft, the rudder is operated by pedals via mechanical linkages or hydraulics.

<span class="mw-page-title-main">Tiller</span> Lever used to steer a vehicle, typically on boats

A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post or stock to provide leverage in the form of torque for the helmsman to turn the rudder. A tiller may also be used in vehicles outside of water, and was seen in early automobiles.

The coxswain is the person in charge of a boat, particularly its navigation and steering. The etymology of the word gives a literal meaning of "boat servant" since it comes from cock, referring to the cockboat, a type of ship's boat, and swain, an Old English term derived from the Old Norse sveinn meaning boy or servant. In 1724, a "cockswain" was defined as "An officer of a ship who takes care of the cockboat, barge or shallop, with all its furniture, and is in readiness with his crew to man the boat on all occasions." When the term "cockboat" became obsolete, the title of coxswain as the person in charge of a ship's boat remained.

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".

<span class="mw-page-title-main">Ship's wheel</span> Mechanism used to steer a ship or other watercraft

A ship's wheel or boat's wheel is a device used aboard a water vessel to steer that vessel and control its course. Together with the rest of the steering mechanism, it forms part of the helm. It is connected to a mechanical, electric servo, or hydraulic system which alters the horizontal angle of the vessel's rudder relative to its hull. In some modern ships the wheel is replaced with a simple toggle that remotely controls an electro-mechanical or electro-hydraulic drive for the rudder, with a rudder position indicator presenting feedback to the helmsman.

<span class="mw-page-title-main">Bridge (nautical)</span> Room or platform from which a ship can be commanded

A bridge, also known as a pilothouse or wheelhouse, is a room or platform of a ship from which the ship can be commanded. When a ship is under way, the bridge is manned by an officer of the watch aided usually by an able seaman acting as a lookout. During critical maneuvers the captain will be on the bridge, often supported by an officer of the watch, an able seaman on the wheel and sometimes a pilot, if required.

<span class="mw-page-title-main">Chief mate</span> Licensed mariner and head of the deck department of a merchant ship

A chief mate (C/M) or chief officer, usually also synonymous with the first mate or first officer, is a licensed mariner and head of the deck department of a merchant ship. The chief mate is customarily a watchstander and is in charge of the ship's cargo and deck crew. The actual title used will vary by ship's employment, by type of ship, by nationality, and by trade: for instance, chief mate is not usually used in the Commonwealth, although chief officer and first mate are; on passenger ships, the first officer may be a separate position from that of the chief officer that is junior to the latter.

A second mate or second officer (2/O) is a licensed member of the deck department of a merchant ship holding a Second Mates Certificate of Competence, by an authorised governing state of the International Maritime Organization (IMO). The second mate is the third in command and a watchkeeping officer, customarily the ship's navigator. Other duties vary, but the second mate is often the medical officer and in charge of maintaining distress signaling equipment. On oil tankers, the second mate usually assists the chief mate with the cargo operations.

<span class="mw-page-title-main">Third mate</span>

A third mate (3/M) or third officer is a licensed member of the deck department of a merchant ship. The third mate is a watchstander and customarily the ship's safety officer and fourth-in-command. The position is junior to a second mate. Other duties vary depending on the type of ship, its crewing, and other factors.

An officer of the deck (OOD) underway is a watchstanding duty officer on a surface ship in the United States Navy, United States Coast Guard, and NOAA Commissioned Officer Corps who is tasked with certain duties and responsibilities for the ship. The officer of the deck is either subordinate to the command duty officer or, in the absence of one, reports directly to the ship's commanding officer and executive officer, in the latter case holding responsibility for the ship altogether. This article describes duties and responsibilities for an underway OOD for surface ships only.

<span class="mw-page-title-main">Sea captain</span> Commander of a ship or other sea-going vessel

A sea captain, ship's captain, captain, master, or shipmaster, is a high-grade licensed mariner who holds ultimate command and responsibility of a merchant vessel. The captain is responsible for the safe and efficient operation of the ship, including its seaworthiness, safety and security, cargo operations, navigation, crew management, and legal compliance, and for the persons and cargo on board.

<span class="mw-page-title-main">Able seaman</span> Unlicensed member of the deck department of ship

An able seaman (AB) is a seaman and member of the deck department of a merchant ship with more than two years' experience at sea and considered "well acquainted with his duty". An AB may work as a watchstander, a day worker, or a combination of these roles. Once a sufficient amount of sea time is acquired, then the AB can apply to take a series of courses/examinations to become certified as an officer.

<span class="mw-page-title-main">Ship stability</span> Ship response to disturbance from an upright condition

Ship stability is an area of naval architecture and ship design that deals with how a ship behaves at sea, both in still water and in waves, whether intact or damaged. Stability calculations focus on centers of gravity, centers of buoyancy, the metacenters of vessels, and on how these interact.

<span class="mw-page-title-main">Port and starboard</span> Nautical terms for direction

Port and starboard are nautical terms for watercraft, aircraft and spacecraft, referring respectively to the left and right sides of the vessel, when aboard and facing the bow (front).

There are 2 different meanings to the term 'lee helm' depending on whether one is discussing sailboats or motorized ships.

USS <i>John S. McCain</i> and <i>Alnic MC</i> collision 2017 maritime accident

At 5:24 a.m. on 21 August 2017, USS John S. McCain, a United States Navy warship, was involved in a collision with the Liberian-flagged tanker Alnic MC off the coast of Singapore and Malaysia, east of the Strait of Malacca. According to a U.S. Navy press release, the breach "resulted in flooding to nearby compartments, including crew berthing, machinery, and communications rooms." Ten US Navy sailors died as a result of the crash, which prompted the Maritime and Port Authority (MPA) of Singapore to start a multi-agency search-and-rescue (SAR) effort as the agency responsible for coordinating SAR operations within Singapore's Maritime Search and Rescue Region (MSRR). The Singapore Transport Safety Investigation Bureau (TSIB) also launched a marine safety investigation following the collision in accordance with the International Maritime Organisation's Casualty Investigation Code in Singapore's capacity as a coastal state, and published its final report on 8 March 2018. The U.S. Navy announced on 24 August 2017 that it had suspended search-and-rescue efforts for survivors in the open sea to focus on the recovery of the remains of the missing sailors still inside the flooded compartments of the ship. By 27 August, U.S. Navy and United States Marine Corps divers had recovered the remains of all ten sailors. On 12 September 2017, the United States' chargé d'affaires Stephanie Syptak-Ramnath expressed thanks for Singapore's support during the SAR operations. The McCain returned to service in June 2020.

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".

Autonomous and Remote Navigation Trial Project is the trial of maritime autonomous surface ships (MASS) in commercial operations hold within 2020 in three different sea water areas of Russia.

Nautical operations refers to the crew operation of a ship. It is the term used in academic education to refer to the studies of this professional field. Nautical operations refers to all the operational procedures, specific roles of officers and crew members, and regular functions and technical processes, which together shape the structure and functions for the general operations of a ship.

References