Chinook | |
---|---|
Role | Glider |
National origin | United States |
Designer | Fred Hermanspann and Art Penz |
First flight | 1993 |
Status | Production completed |
Number built | One |
The Hermanspann Chinook is an American mid-wing, two-seat, experimental research glider that was designed and constructed by Fred Hermanspann and Art Penz. [1] [2]
The Chinook and its improved variant, the Chinook S, have been used to study the effect of rain on airfoils and also stall dynamics. [1]
The aircraft is predominantly made from aluminium with the cockpit area made from fiberglass. Its 57 ft (17.4 m) span high aspect ratio wing employs a Wortmann FX67-K-170/17 airfoil. Glidepath control is via hydraulically operated trailing edge flaps that deflect 80°. The landing gear consists of hydraulically retractable nose gear and main gear. The vertical stabilizer is highly swept. [1] [3]
The improved Chinook S features an improved wing tip design, system and structure refinements and a BRS-1200 ballistic parachute.[ citation needed ]
Only one Chinook was constructed and it was registered with the US Federal Aviation Administration in the Experimental - Amateur-built category. [1] [2]
In March 2015 the Chinook was still registered with the FAA to Hermanspann. [2]
After the conclusion of a number of research projects including about rain effects, performance measurements and stall dynamics, the sailplane was being employed extensively through 2015 for cross-country flying, having made a total of five crossings of the Cacscade mountains and having set four Washington state soaring records.[ citation needed ]
Data from Sailplane Directory [1]
General characteristics
Performance
Related lists
The Schweizer SGS 1-34 is a United States Standard Class, single-seat, high-wing glider built by Schweizer Aircraft of Elmira, New York.
The Glasflügel 604 is a high-wing, T-tailed, single seat, FAI Open Class glider that was designed and produced in West Germany by Glasflügel starting in 1970.
The Scheibe SF 34 Delphin is a two-seat sailplane that was produced by Scheibe in Germany in the late 1970s and 1980s. Designed by Wolf Hoffmann and originally designated the SF H34, it was Scheibe's first unpowered aircraft of composite construction.
The Applebay Zia is an American, single-seat, high-wing, twin-boom, pusher configuration motor glider that was designed by George Applebay for the 1982 Sailplane Homebuilders Association Homebuilt Sailplane Design Contest. The aircraft was intended to be offered as a factory completed aircraft or as a kit.
The Laister LP-15 Nugget is an American single-seat, high-wing glider designed by Jack and Bill Laister for the FAI Standard Class.
The Hall Vector 1 is an American high-wing, ultralight glider that was designed by Stan Hall for serious cross-country flights.
The Monaghan Osprey is an American mid-wing, single-seat, T-tailed, FAI Standard Class glider that was designed and constructed by Richard C. Monaghan of Pearblossom, California.
The FFA Diamant is a family of Swiss high-wing, T-tailed, single-seat, FAI Standard Class and FAI Open Class gliders that was designed by engineering students under supervision of Professor Rauscher at the ETH Zurich and manufactured by Flug- und Fahrzeugwerke Altenrhein AG (FFA) of Altenrhein, Switzerland.
The Whigham GW-2 is an American high-wing, single-seat, V-tailed, FAI Open Class glider that was designed and constructed by Gene Whigham, a retired flight test engineer for Convair.
The Whigham GW-5 is an American mid-wing, single seat, FAI Standard Class glider that was designed and constructed by Gene Whigham, a retired flight test engineer for Convair.
The Glasflügel 205 Club Libelle is a high wing, T-tailed, single seat glider that was designed and produced in West Germany by Glasflügel for club and rental use.
The Strojnik S-2 is an American high-wing, single-seat motor glider that was designed and built by Aleš Strojnik.
The Leffler-MacFarlane LM-1 is an American mid-wing, single-seat, FAI Open Class glider that was designed and constructed by Al Leffler, Walt MacFarlane and Bill Meyer, first flying in November 1963.
The Celair GA-1 Celstar is a South African mid-wing, single-seat, aerobatic glider that was designed by Pieter Celliers and produced by his company, Celair (Pty) Limited.
The Farrar LSG-1 Bird Flight Machine is an American, high-wing, V-tailed, single-seat, experimental research glider that was designed and built by Demetrius F. Farrar Jr. in 1969 for exploring aspects of bird flight.
The Masak Scimitar was an American mid-wing, single-seat glider that was designed and constructed by Peter Masak.
The Rensselaer RP-3 is an American mid-wing, T-tailed single-seat, glider that was designed by Brian E. Thompson and produced by the Rensselaer Polytechnic Institute of Troy, New York.
The LAK-12 is a Lithuanian mid-wing, single-seat, FAI Open Class glider that was designed and produced by Lietuviškos Aviacinės Konstrukcijos (LAK) in Lithuania and later by Sportine Aviacija and Sport Aviation USSR.
The ProFe Banjo is a family of Czech high-wing, strut-braced, T-tailed gliders and motor gliders designed and produced by ProFe in kit form for amateur construction.
The Aviastroitel AC-7 is a Russian mid-wing, T-tailed, two-seats-in-side-by-side configuration, glider that was designed by Vladimir Egorovich Fedorov and produced by Aviastroitel, now Glider Air Craft.