Hull maintenance technician

Last updated
Hull maintenance technician
Rating Badge HT.jpg
Rating insignia
Issued by United States Navy
TypeEnlisted rating
AbbreviationHT
SpecialtyMetal working, welding, fabrication, shipboard firefighting
A hull maintenance technician using a cutting torch aboard the USS Nimitz US Navy 061027-N-8119R-159 Hull Maintenance Technician 3rd Class Jeremy Hanel uses a cutting torch to cut apart old shelving aboard the nuclear-powered aircraft carrier USS Nimitz (CVN 68).jpg
A hull maintenance technician using a cutting torch aboard the USS Nimitz

Hull maintenance technician (abbreviated as HT) is a United States Navy occupational rating.

Contents

Hull maintenance technicians plan, supervise, and perform tasks necessary for fabrication, installation and repair of all types of shipboard structures, plumbing, sheet metal fabrication, carpentry and piping systems; organize, supervise, and train personnel in maintenance and hull and mechanical repair; supervise and perform tasks in procurement and issuance of supplies and repair parts; instruct personnel and enforce safety and security precautions; prepare records and reports, and maintain shipboard sewage systems.

An HT stationed on a tender or other auxiliary vessel or shore duty station, may perform far more tasks than listed here. HTs fabricate and repair all types of equipment and items. This expertise may include metal of all thicknesses with hand tools, welders and very large cutting, forming and shaping equipment. Having had other ratings such as molder, patternmaker, carpenter, pipefitter and others absorbed into the rating, HTs may be tasked with working with all types of materials.

History

The rate hull maintenance technician has only existed in the United States Navy since 1972. [1] Prior to that the rate was split into four different rates including plumber, shipfitter, metalsmith, and pipefitter. The history of these different rates is shown through the current rating badge. It consists of a maul; (consistent with the shipfitters and metalsmiths), an axe; (showing an in depth knowledge of firefighting and damage control), and the carpenters square; (which displays an ability to design as well as construct anything the ship may need).

Through the 1960s to the 2000s Treasure Island, San Francisco and The Naval Damage Control Training Center, located in Philadelphia, Pennsylvania were home to the Navy's damage control schools as well as the nuclear, biological, radiological and chemical warfare school, both primary schools of new hull maintenance technicians. Treasure Island continued to train new sailors in the art of damage control until the base was decommissioned in 1996. [1] As of 2015, the damage control school is at Naval Station Great Lakes, and is on the same base as basic engineering common core and other A schools.

From 1972 to 1988 HTs assumed all the duties and responsibilities of the damage controlman rating. Even though the names merged into just HT, the responsibilities to the Navy did not lessen. HTs now had to go to their primary A school in Philadelphia to learn the HT side, and then onto Treasure Island to learn the damage control and nuclear, biological, radiological and chemical side, then onto San Diego to learn welding, brazing and sheet metal work. [1] By 1988 the Navy realized that damage control is such a large responsibility, they needed a rating specifically tasked with its duties, hence the reemergence of the damage controlman in 1988.

A-Schools

The following are all the prerequisites needed to select HT as a rating: an ASVAB line score combination of VE+AR+MK+AS=205 or VE+AR+MK+MC=205, [2] normal color perception, normal hearing, and U.S. citizenship. [3]

Once the prerequisites have been met the first step is boot camp in Naval Station Great Lakes. Immediately following boot camp, new sailors start their A schools. All engineering sailors go through a 10-week basic engineering common core (BECC), which is also in Naval Station Great Lakes. At BECC students will learn the basics of engineering in the US Navy. Here sailors will learn damage control, piping systems, valves, basic engines, and much more. [4]

After BECC HTs will go to their HT A school, which is on the same base as BECC, and is 6 weeks in length. [5] Here sailors learn drafting, blueprint reading, quality assurance, hand tools, sheet metal work, welding, brazing, pipefitting, cutting, metal identification, piping systems, measurements, shop safety, and shipboard sanitation systems. [4]

Everyday life of an HT

An HT's job in the Navy is usually very broad and sometimes challenging. An HT must be willing to learn new skills and adapt to the situation. An HT is expected to keep the sewage system in perfect working condition, conduct metal work, fabrication and welding, be able to fix, repair or replace any equipment on the ship, as well as be an integral part of the ship's damage control efforts. [6]

According to Navy Personnel Command, an HT's duties include, but are not limited to, installing, maintaining and repairing valves, piping, plumbing system fittings and fixtures, and marine sanitation systems. [7] Aboard larger ships such as amphibious transport docks, plumbing and sewage-related maintenance can take up the overwhelming majority of a hull technician's workload. [8] [9] [10]


See also

Related Research Articles

<span class="mw-page-title-main">Plumbing</span> Systems for conveying fluids

Plumbing is any system that conveys fluids for a wide range of applications. Plumbing uses pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids. Heating and cooling (HVAC), waste removal, and potable water delivery are among the most common uses for plumbing, but it is not limited to these applications. The word derives from the Latin for lead, plumbum, as the first effective pipes used in the Roman era were lead pipes.

HT, Ht, hT, or ht may refer to:

<span class="mw-page-title-main">Surface warfare insignia</span>

The surface warfare insignia is a military badge of the United States Navy which is issued to U.S. Navy personnel who are trained and qualified to perform duties aboard United States surface warships. There are presently four classes of the surface warfare pin, being that of line, staff, special operations, and enlisted. The line and enlisted surface warfare badges may be earned by United States Coast Guard personnel assigned to Navy commands. The various badge types are as follows:

The Enlisted Aviation Warfare Specialist (EAWS) insignia is a military badge of the United States Navy which was created in March 1980. The insignia recognizes those members of the Navy's enlisted force who have acquired the specific professional skills, knowledge, and military experience that result in qualification for service in the aviation activities of the Navy. This includes most personnel who are trained flight deck personnel onboard aircraft carriers, or maintenance personnel at an Aircraft Intermediate Maintenance Detachment or Department (AIMD) or aircraft squadron.

<span class="mw-page-title-main">Naval Station Great Lakes</span> United States Navy base

Naval Station Great Lakes is the home of the United States Navy's only current boot camp, located near North Chicago, in Lake County, Illinois. Important tenant commands include the Recruit Training Command, Training Support Center and Navy Recruiting District Chicago. Naval Station Great Lakes is the largest military installation in Illinois and the largest training station in the Navy. The base has 1,153 buildings situated on 1,628 acres (6.59 km2) and has 69 mi (111 km) of roadway to provide access to the base's facilities. Within the naval service, it has several different nicknames, including "The Quarterdeck of the Navy", or the more derogatory "Great Mistakes". It is also referred to as "second boot camp" while at Training Support Command.

<span class="mw-page-title-main">Cryptologic technician</span>

Cryptologic Technician (CT) is a United States Navy enlisted rating or job specialty. The CT community performs a wide range of tasks in support of the national intelligence-gathering effort, with an emphasis on cryptology and signal intelligence related products.

<span class="mw-page-title-main">Machinist's mate</span> Rating in the U.S. Navy

Machinist's mate is a rating in the United States Navy's engineering community.

<span class="mw-page-title-main">Radioman</span> US Navy and US Coast Guard rating for communication personnel

Radioman (RM) was a rating for United States Navy and United States Coast Guard enlisted personnel, specializing in communications technology.

<span class="mw-page-title-main">Gunner's mate</span>

The United States Navy and United States Coast Guard occupational rating of gunner's mate (GM) is a designation given by the Bureau of Naval Personnel (BUPERS) to enlisted sailors who either satisfactorily complete initial Gunner's Mate "A" school training, or who "strike" for the rating by showing competence in the field of ordnance. When "striking" one isn't required to be a seaman, but must belong to one of three undesignated rates: Fireman (FN), Seaman (SN), or Airman (AN). It is also possible to cross rate to Gunner's Mate. Cross rating refers to the act of an enlisted sailor "crossing" from their current rating to another rating of their choice, provided their ASVAB scores are high enough and there are open slots for the rate.

<span class="mw-page-title-main">Damage controlman</span>

People who are in the damage controlman (DC) rating are the Navy's and Coast Guard’s maintenance and emergency repair specialists.

<span class="mw-page-title-main">Pipefitter</span> Tradesman who works with mechanical pipes

A pipefitter or steamfitter is a tradesman who installs, assembles, fabricates, maintains, and repairs mechanical piping systems. Pipefitters usually begin as helpers or apprentices. Journeyman pipefitters deal with industrial/commercial/marine piping and heating/cooling systems. Typical industrial process pipe is under high pressure, which requires metals such as carbon steel, stainless steel, and many different alloy metals fused together through precise cutting, threading, grooving, bending, and welding. A plumber concentrates on lower pressure piping systems for sewage and potable tap water in the industrial, commercial, institutional, or residential atmosphere. Utility piping typically consists of copper, PVC, CPVC, polyethylene, and galvanized pipe, which is typically glued, soldered, or threaded. Other types of piping systems include steam, ventilation, hydraulics, chemicals, fuel, and oil.

<span class="mw-page-title-main">Aviation machinist's mate</span>

Aviation Machinist's Mates are United States Navy aircraft engine mechanics that inspect, adjust, test, repair, and overhaul aircraft engines and propellers. More specifically, ADs install, maintain, and service various aircraft engine types as well as various accessories, gear boxes, related fuel systems, and lubrication systems; determine reasons for engine degradation using various test equipment; perform propeller repairs; handle and service aircraft ashore or aboard ship; and can also serve as aircrewman in various types of aircraft.

<span class="mw-page-title-main">Fire controlman</span> United States Navy occupational rating

Fire controlman is a United States Navy occupational rating. Often confused with being fireman on board a ship, FC's actually operate advanced weapons systems, whereas Damage Controlman (DC) are actually the shipboard firefighters.

<span class="mw-page-title-main">Boatswain's mate (United States Navy)</span> United States Navy rating

The United States Navy occupational rating of boatswain's mate is a designation given by the Bureau of Naval Personnel (BUPERS) to enlisted members who were rated or "striking" for the rating as a deck seaman. The colloquial form of address for a boatswain's mate is "Boats".

<span class="mw-page-title-main">Naval Station Treasure Island</span> U.S. Navy facility in San Francisco Bay (1942–1997)

Naval Station Treasure Island is a former United States Navy facility that operated on Treasure Island in San Francisco Bay from 1942 to 1997.

<span class="mw-page-title-main">Data systems technician</span>

The United States Navy occupational rating of data systems technician was a designation given by the Bureau of Naval Personnel (BUPERS) to enlisted members who satisfactorily complete initial data systems technician "A" school training. The primary training location for the DS rating was Combat System Technical Schools Command (CSTSC) at Mare Island Vallejo, CA.

Ship's carpenter is a post aboard ships, both naval and commercial, responsible for the maintenance and repair of the ship's wooden parts, as well as its water stocks.

<span class="mw-page-title-main">Electronics technician (United States Navy)</span>

The United States Navy job rating of electronics technician (ET) is a designation given by the Bureau of Naval Personnel (BUPERS) to enlisted members who satisfactorily complete initial Electronics Technician "A" school training.

The United States Navy Nuclear Propulsion community consists of Naval Officers and Enlisted members who are specially trained to run and maintain the nuclear reactors that power the submarines and aircraft carriers of the United States Navy. Operating more than 80 nuclear-powered ships, the United States Navy is currently the largest naval force in the world.

References

  1. 1 2 3 "Marine DC & PPE Information Center". dcfpnavymil.org. Retrieved 28 March 2020.
  2. ↑ "Navy Rating ASVAB Score Requirements". Navy Cyberspace. Retrieved 2015-12-26.
  3. ↑ Department of Navy COOL. (2014).
  4. 1 2 "Hull Maintenance Technician (HT)". Navy Personnel Command. 2014. Retrieved 28 March 2020.
  5. ↑ Department of Navy COOL. (2015)
  6. ↑ Navy Education and Training Professional Development and Technology Center. (n.d.). Hull Maintenance Technician. NAVEDTRA-14119.
  7. ↑ Department of Navy COOL. (2014)
  8. ↑ 4 years in the navy as a ht hull technician. YouTube . Archived from the original on 2021-12-09.
  9. ↑ HT in the navy. YouTube . Archived from the original on 2021-12-09.
  10. ↑ Navy watch. YouTube . Archived from the original on 2021-12-09.

Commons-logo.svg Media related to Hull maintenance technician at Wikimedia Commons

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.