Humbucker

Last updated
"Open Coil" (uncovered) humbucker pickup Guitare double micro.jpg
"Open Coil" (uncovered) humbucker pickup
Covered humbucker pickup on a Les Paul copy PAF-Pickup-1.jpg
Covered humbucker pickup on a Les Paul copy

A humbucker, humbucking pickup, or double coil, is a guitar pickup that uses two wire coils to cancel out noisy interference from coil pickups. Humbucking coils are also used in dynamic microphones to cancel electromagnetic hum. Humbuckers are one of two main types of guitar pickups. The other is single coil.

Contents

History

The "humbucking coil" was invented in 1934 by Electro-Voice, an American professional audio company based in South Bend, Indiana, that Al Kahn and Lou Burroughs incorporated in 1930 for the purpose of manufacturing portable public address equipment, including microphones and loudspeakers. [1]

The twin coiled guitar pickup invented by Arnold Lesti in 1935 is arranged as a humbucker, and the patent USRE20070 [2] describes the noise cancellation and current summation principles of such a design. This "Electric Translating Device" employed the solenoid windings of the pickup to magnetize the steel strings by means of switching on a short D.C. charge before switching over to amplification.

In 1938, A.F. Knoblaugh invented a pickup for stringed instruments involving two stacked coils described in U.S. patent 2,119,584 . This pickup was to be used in pianos, since he was working for Baldwin Piano at the time.

The 1939 April edition of Radio Craft Magazine [3] shows how to construct a guitar pickup made with two identical coils wrapped around self-magnetized iron cores, where one is then flipped over to create a reverse-wound, reverse-polarity, humbucking orientation. The iron cores of these pickups were magnetized to have their north-south poles at the opposite ends of the core, rather than the now more common top-bottom orientation.

To overcome the hum problem for guitars, a humbucking pickup was invented by Seth Lover of Gibson under instruction of then-president Ted McCarty. About the same time, Ray Butts developed a similar pickup that was taken up by Gretsch guitars. Although Gibson's patent was filed almost two years before Gretsch's, their patent was issued four weeks after Gretsch's. Both patents describe a reverse-wound and reverse-polarity pair of coils. [4] [5]

A successful early humbucking pickup was the type which is nowadays known as the "PAF" (literally "Patent Applied For") invented by Seth Lover in 1955. [6] Because of this, and because of its use on the Gibson Les Paul guitar, popularization of the humbucker is strongly associated with Gibson, although humbuckers had been used in many different guitar designs by other manufacturers before. Rickenbacker offered dual coil pickups arranged in a humbucking pattern beginning in late 1953 but dropped the design in 1954 due to the perceived distorted sound, which had stronger mid-range presence.

The Gibson Les Paul was the first guitar to use humbuckers in large-scale production. Over the following decades, variants of practically every type of electric guitar have also been equipped with humbuckers, even types which are traditionally associated with single-coil pickups, like Fender Stratocasters and Telecasters. In particular, the replacement of the bridge pickup in a Stratocaster-type guitar with a humbucker, resulting in a pickup configuration noted as H-S-S (starting at bridge pickup: H for humbucker, S for single coil) has gained much popularity. Guitars in this configuration are sometimes referred to as "Fat Strats", because of the "fatter", "rounder" tone offered by the humbucking pickup, and are also closely related to the "Superstrat" style of guitar.

Function

In any magnetic pickup, a vibrating guitar string, magnetized by a fixed magnet within the pickup, induces an alternating voltage across its coil. However, wire coils also make excellent antennas and are therefore sensitive to electromagnetic interference caused by alternating magnetic fields from mains wiring (mains hum) and electrical appliances like transformers, motors, and computer screens, especially older CRT monitors. Guitar pickups reproduce this noise, which can be quite audible, sounding like a constant hum or buzz. This is most noticeable when using distortion, fuzz, compressors, or other effects which, by adding gain to low-level signals, reduce the signal-to-noise ratio and therefore amplify the unwanted interference relative to the signal from the strings. [7]

Humbuckers work by pairing a coil that has the north poles of its magnets oriented "up" (toward the strings) with another coil alongside it with the south pole of its magnets oriented up. By connecting the coils together out of phase, the interference is significantly reduced via phase cancellation: the string signals from both coils add up instead of canceling because the magnets are placed in opposite polarity. [8] This dramatically improves the signal-to-noise ratio. The technique has something in common with what electrical engineers call "common-mode rejection", and is also found in the balanced lines used in audio equipment. By convention, both humbucker coils are wound counterclockwise. The coils can be connected in series or in parallel in order to achieve this hum-cancellation effect, but humbucker pickups tend to be connected in series because that doubles the signal of the strings while keeping the hum reduced. [9] Some types of humbucker pickups can be manually split (with a switch or within the pickup selector) so that only one coil is active.

Humbuckers on a Gibson Invader Gibson Humbuckers.jpg
Humbuckers on a Gibson Invader
Top: A pair of mini-humbuckers, both with 4-conductor wire. Bottom: The same pickups, installed in a modified Hohner G3-T. Minihumbuckers.png
Top: A pair of mini-humbuckers, both with 4-conductor wire. Bottom: The same pickups, installed in a modified Hohner G3-T.

Alternative designs

Mini-humbuckers

Many solid-body guitars feature cavities only for single-coil pickups. Installing full-sized humbuckers in this type of guitar requires additional routing of the woodwork, and/or cutting of the pickguard if the instrument has one. If the process is not carefully done, the instrument's body and pickguard may be damaged. In many situations, to maintain a guitar's aesthetics and/or functionality, the process would not be carried out, to avoid the associated risk. As a result, many pickup manufacturers now produce humbucking pickups compacted into the size of a single coil. Many different kinds of mini-humbuckers are available from numerous manufacturers, and they produce a wide range of different tones. The most common design is similar to a traditional humbucker.

Stacked coils

As a concept similar to mini-humbuckers, a stacked pickup offers the more subtle and delicate sound of a single-coil, while still retaining the hum-cancellation properties of a humbucker. One of the coils simply has no magnets, so the inverted signal of this coil only serves to cancel out the hum picked up by the other coil, with the actual string signal remaining unaffected. This is often used on bass guitars, where the type of pickup used has a greater effect on the instrument's overall sound, and the lower range of notes and their fundamental frequencies can match frequencies typically more heavily affected by hum. This is often called a "stacked" pickup, because the coils are most often "stacked" vertically, with the coil containing magnets placed closer to the strings.

Rail humbuckers

Another design known as the rail humbucker features a single magnetic component spanning across the entire string width of the instrument. These pickups look like a normal mini-humbucker, except without the typical dots corresponding to the magnetic pole-pieces. This is sometimes expanded into a normal-size "quadrail", or double humbucker, effectively combining 4 coils connected in series to produce an extremely high-output pickup. The Kent Armstrong "Motherbucker" is an example of such an overpowered pickup.

The same type of rails can also be found in a normal-size humbucker. Heavy metal guitarist Dimebag Darrell made heavy use of this type of pickup wired in the bridge position. These tend to also sound fuller and have a higher output and bass response than the single coil-size version. DiMarzio has designed and sold many such pickups.

Coil splitting and coil taps

Some guitars which have humbucking pickups feature "coil splits", which allow the pickups to act as "pseudo-single" coils by either short-circuiting or bypassing one coil. The electrical circuit of the pickup is reduced to that of a true single coil so there is no hum canceling effect. Usually, this feature is activated using a miniature toggle switch or a DPDT push-pull switch mounted on a potentiometer. Some guitars (e.g., the Peavey T-60 and the Fender Classic Player Jaguar HH) make use of a variable coil split circuit that allows the guitarist to dial a variable amount of signal from the second coil, from purely single coil to full humbucker and everything in-between.

A similar option is a series/parallel switch, which in one position causes the coils to be connected in parallel rather than in series. This retains the humbucker's noise-cancellation properties, and gives a sound closer to that of two single-coil pickups used together.

Coil splitting is often wrongly referred to as a "coil tapping". Coil taps are most commonly found on single coil pickups, and involve adding an extra hook-up wire during manufacture of the pickup so the guitarist can choose to have all the windings of the pickup included in the circuit, for a fatter, higher output sound with more midrange, or switch the output to 'Tap' into the windings at a point less than the full coil for a brighter, lower-output and cleaner sound. For example: a full pickup coil may be 10,000 turns of wire and the "Tap" may be at 8000 turns. Because of the confusion between coil splits and coil taps—and the rareness of coil taps in general—it is difficult to find tappable single-coil pickups for sale. However, pickup manufacturer Seymour Duncan offers tapped versions of many of their Telecaster and Stratocaster pickups.

The split single coil may bear little resemblance to popular single coil pickups such as those made by Fender and the P-90 made by Gibson, owing to other differences in pickup construction.

Notable humbucker designs

Other noise-reducing pickup designs

While the original humbucker remains the most common noise-reducing pickup design, inventors have tried many other approaches to reducing noise in guitar pickups.

Combining two single-coil pickups

Many instruments combine separate single-coil pickups in a hum reducing configuration by reversing the electrical phase of one of the pickups. This arrangement is similar to that of a humbucking pickup and effectively reduces noise. Examples of this include the Fender Jazz Bass, introduced in 1960, which used a pair of single-coil pickups, one near the bridge and another about halfway between the bridge and the neck, and many Stratocaster style guitars, which often have 3 pickups with the middle one reversed electrically and magnetically. The usual five-way selector switch provides two humbucking settings, using the reversed middle pickup in parallel with either the bridge or neck pickup.

If the pickups are wired in series instead of parallel, the resulting sound is close to that of a normal humbucker. It is even closer to a humbucker-type sound if the coils are placed closer together.

Proprietary designs

Fender "Split coil" hum canceling pickup on a Precision Bass Precision Bass pickup.jpg
Fender "Split coil" hum canceling pickup on a Precision Bass

In 1957, Fender introduced a split pickup to its Precision Bass, where one coil is serving the E and A strings, and the other one the D and G strings. This configuration is often referred to as a "split coil" pickup, which should not be confused with the possibility of "coil-splitting" a regular humbucker, as discussed above. Both coils see nearly identical extraneous electromagnetic disturbances, and since they are wired in humbucking fashion, can effectively cancel them. However, the majority of the sound signal of any single note will mostly be generated by just one of the coils, so that output level and tonal qualities are much closer to a regular single-coil pickup. The resulting "P-Style" pickup is usually regarded as the main ingredient of the "P-Bass" sound, and many variants on the design are offered by many manufacturers. The concept was later developed into G&L's "Z-coil" pickup, which is used for standard guitars such as their Comanche model.

In 1985, Lace Music Products introduced the Lace Sensor pickup, which uses proprietary screened bobbins to reduce hum while preserving single-coil tone. [12]

In the early 1980s DiMarzio introduced replacement pickups for Stratocaster and Telecaster guitars. These were of the stacked humbucker design, where the lower pickup coil functions solely to cancel hum.

The DiMarzio "Super Distortion" pickup, introduced in 1972, was the first after-market replacement guitar pickup. With its much-increased output compared to humbuckers installed in guitars of the time, it became an instant favourite of many hard-rock guitarists, and it remains a popular choice for a pickup upgrade decades later.

See also

Related Research Articles

<span class="mw-page-title-main">Electric guitar</span> Electrical string musical instrument

An electric guitar is a guitar that requires external amplification in order to be heard at typical performance volumes, unlike a standard acoustic guitar. It uses one or more pickups to convert the vibration of its strings into electrical signals, which ultimately are reproduced as sound by loudspeakers. The sound is sometimes shaped or electronically altered to achieve different timbres or tonal qualities from that of an acoustic guitar via amplifier settings or knobs on the guitar. Often, this is done through the use of effects such as reverb, distortion and "overdrive"; the latter is considered to be a key element of electric blues guitar music and jazz, rock and heavy-metal guitar-playing. Designs also exist combining attributes of the electric and acoustic guitars: the semi-acoustic and acoustic-electric guitars.

<span class="mw-page-title-main">Single coil guitar pickup</span>

A single coil pickup is a type of magnetic transducer, or pickup, for the electric guitar and the electric bass. It electromagnetically converts the vibration of the strings to an electric signal. Single coil pickups are one of the two most popular designs, along with dual-coil or "humbucking" pickups.

Seth E. Lover was a designer of amplifiers and musical instrument electronics and effects. He is most famous for developing the Gibson humbucker or hum-cancelling electric stringed instrument pickup, most often used on the electric guitar.

The Fender Jaguar is an electric guitar by Fender Musical Instruments characterized by an offset-waist body, a relatively unusual switching system with two separate circuits for lead and rhythm, and a short-scale 24" neck. Owing some roots to the Jazzmaster, it was introduced in 1962 as Fender's feature-laden top-of-the-line model, designed to lure players from Gibson. During its initial 13-year production run, the Jaguar did not sell as well as the less expensive Stratocaster and Telecaster, and achieved its most noticeable popularity in the surf music scene. After the Jaguar was taken out of production in 1975, vintage Jaguars became popular first with American punk rock players, and then more so during the alternative rock, shoegazing and indie rock movements of the 1980s and 1990s. Fender began making a version in Japan in the mid-1980s, and then introduced a USA-made reissue in 1999. Since then, Fender has made a variety of Jaguars in America, Mexico, Indonesia and China under both the Fender and Squier labels. Original vintage Jaguars sell for many times their original price.

<span class="mw-page-title-main">Superstrat</span> Electric guitar design

Superstrat is a name for an electric guitar design that resembles a Fender Stratocaster but with differences that clearly distinguish it from a standard Stratocaster, usually to cater to a different playing style. Differences typically include more pointed, aggressive-looking body and neck shapes with increased cutaways to facilitate access to the higher frets, an increased number of frets on the fingerboard, a contoured heel at the neck joint facilitating easier higher fret access, the usage of humbucking pickups, and locking vibrato systems, most commonly the Floyd Rose.

<span class="mw-page-title-main">Pickup (music technology)</span> Captures vibrations produced by musical instruments

A pickup is a transducer that captures or senses mechanical vibrations produced by musical instruments, particularly stringed instruments such as the electric guitar, and converts these to an electrical signal that is amplified using an instrument amplifier to produce musical sounds through a loudspeaker in a speaker enclosure. The signal from a pickup can also be recorded directly.

<span class="mw-page-title-main">Gibson Firebird</span> Solid body electric guitar

The Gibson Firebird is a solid-body electric guitar manufactured by Gibson beginning in 1963.

<span class="mw-page-title-main">EMG, Inc.</span>

EMG, Inc. is the current legal name of a company based in Santa Rosa, California that manufactures guitar pickups and EQ accessories. Among guitar and bass accessories, the company sells active humbucker pickups, such as the EMG 81, the EMG 85, the EMG 60, and the EMG 89. They also produce passive pickups such as the EMG-HZ Series, which include SRO-OC1's and SC Sets. There is also a series geared towards a more traditional and passive sound known as the X series.

<span class="mw-page-title-main">Fender Telecaster Deluxe</span> Electric guitar

The Fender Telecaster Deluxe is a solid-body electric guitar originally produced from 1972 to 1981, and re-issued by Fender multiple times starting in 2004.

<span class="mw-page-title-main">P-90</span> Guitar pickup

The P-90 is a single coil electric guitar pickup produced by Gibson Guitar Corporation since 1946, as well as other vendors. Compared to other single coil designs, such as the ubiquitous Fender single coil, the bobbin for a P-90 is wider but shorter. The Fender style single coil is wound in a taller bobbin, but the wires are closer to the individual poles. This makes the P-90 produce a different type of tone, somewhat warmer with less edge and brightness. As with other single-coil pickups, the P-90 is subject to mains hum unless some form of hum cancellation is used.

<span class="mw-page-title-main">PAF (pickup)</span> Guitar pickup

A P.A.F., or simply PAF, is an early model of the humbucker guitar pickup invented by Seth Lover in 1955, so named for the "Patent Applied For" decal placed on the baseplate of each pickup. Gibson used the PAF on guitars from late 1956 until late 1962, long after the patent was granted. They were replaced by the Patent Number pickup, essentially a refined version of the PAF. These were in turn replaced by "T-Top" humbuckers in 1967, and production ended in 1975. Though it was not the first humbucking pickup ever, it was the first to gain widespread use, as the PAF's hum-free signal, tonal clarity, and touch sensitivity when paired with higher-gain amplifiers made the pickups popular with rock and blues guitarists. The PAF is an essential tonal characteristic of the now-famous 1957–1960 Gibson Les Paul Standard guitars, and pickups of this type have gained a large following.

<span class="mw-page-title-main">DiMarzio</span> American manufacturer of guitar pickups

DiMarzio, Inc. is an American manufacturing company, best known for its direct-replacement guitar pickups. The company also produces other guitar accessories, such as hardware, guitar straps, and instrument cables.

<span class="mw-page-title-main">Fender Telecaster Custom</span>

Fender Telecaster Custom is a model of electric guitar made by Fender.

<span class="mw-page-title-main">Lace Sensor</span> Guitar pickup

The Lace Sensor is a guitar pickup designed by Don Lace and manufactured by AGI since 1985. Lace Sensors are true single coil pickups; however, internally they are different from classic single coils. The chief difference is that, like the pickups used on the Fender Jaguar, the coil is surrounded by metal barriers which are designed to reduce electromagnetic interference such as power line hum. According to the manufacturer, these barriers also help concentrate the magnetic field, allowing weaker magnets to be used, which results in less string pull. This line of electric guitar pickups was used exclusively by Fender from 1985 to 1996.

<span class="mw-page-title-main">Fender Contemporary Stratocaster Japan</span>

Fender Contemporary Stratocaster electric guitars were produced by Fender Japan in the 1980s.

The Fender Bullet was an electric guitar originally designed by John Page and manufactured and marketed by the Fender Musical Instruments Corporation. It was first introduced as a line of "student" guitars to replace the outgoing Mustang and Musicmaster models.

Electric guitar design is a type of industrial design where the looks and efficiency of the shape as well as the acoustical aspects of the guitar are important factors. In the past many guitars have been designed with various odd shapes as well as very practical and convenient solutions to improve the usability of the object.

<span class="mw-page-title-main">Fender Noiseless Pickups</span>

The Fender Noiseless series is a line of electric guitar pickups made by the Fender Musical Instruments Corporation designed to cancel 60 cycle (Hz) hum noise while retaining the characteristic sound of single coil pickups. Introduced in 1998, these pickups consist of a pair of single coils stacked one on top of the other, compacted so as to match the shape and width space as a traditional Fender single coil guitar pickup, while being only slightly taller. The upper coil is actually the sound source, while the lower coil is responsible for the mains hum attenuation. Alnico V magnetic bars span from one coil to the other, crossing a soft ferrous steel spacer plate that isolates them, without touching it. The spacer plate has mainly two functions: to isolate the lower coil from the vibrations of the string, making sure that the sound is picked up only from the upper one, and to increase the magnetic flux that passed through both coils, increasing the output of the pickup. This is to be contrasted with the original noise canceling pickup, the humbucker, which is a double-wide, horizontally adjacent pair of single coil pickups with opposing phase.

<span class="mw-page-title-main">Guitar wiring</span>

Guitar wiring refers to the electrical components, and interconnections thereof, inside an electric guitar. It most commonly consists of pickups, potentiometers to adjust volume and tone, a switch to select between different pickups, and the output socket. There may be additional controls for specific functions; the most common of these are described below.

The Fender Telecaster, colloquially known as the Tele, is an electric guitar produced by Fender. Together with its sister model the Esquire, it was the world's first mass-produced, commercially successful solid-body electric guitar. Its simple yet effective design and revolutionary sound broke ground and set trends in electric guitar manufacturing and popular music.

References

  1. Petersen, George (2005-06-17). "Al Kahn (1906-2005)". Mixonline. Archived from the original on 2020-10-30. Retrieved 2021-10-03. Some of the company's groundbreaking innovations were the invention of the humbucking coil in 1934 and the T-45 noise-canceling microphone in 1942—just in time to help with the war effort.
  2. https://docs.google.com/viewer?url=patentimages.storage.googleapis.com/pdfs/USRE20070.pdf [ bare URL PDF ]
  3. Kendall Ford "A Home-Made String-Music Pickup" Radio Craft Magazine, April 1939 p.601,624-5.
  4. "Patent US2896491 - Magnetic pickup for stringed musical instrument". google.com.
  5. "Patent US2892371 - Pickup". google.com.
  6. "Seth Lover interview 1978 vintage Gibson PAF humbucking humbucker pickups guitars". Provide.net. Retrieved 2013-05-02.
  7. "How Hum-Cancelling Works, Part 1". Seymour Duncan. 7 September 2012. Retrieved 2021-09-11.
  8. Lawrence, Robb. The Early Years of the Les Paul Legacy 1915-1963. Hal Leonrd Corp. p. 107.
  9. "How Hum-Cancelling Works, Part 2". Seymour Duncan. 14 September 2012. Retrieved 2021-09-11.
  10. By Rich Kienzie, "Riffs, Amps, and Butts", Guitar Player magazine, March 1990, P.14
  11. Joseph Raymond Butts, U.S. Patent 2892371, Issued 6-22-1959
  12. "Lace Sensor Electric Guitar Pickups - Lace single coil pickup was used exclusively by Fender Guitars until 1996 - the Sensor Gold is the classic Strat Guitar tone". Archived from the original on 2013-11-24. Retrieved 2013-12-02.