Hupmobile

Last updated

Coordinates: 42°22′53″N83°02′03″W / 42.3815°N 83.0343°W / 42.3815; -83.0343

Contents

Hupp Motor Car Company
Automobile Manufacturing
Industry Automotive
Founded1909
Defunct1940
Headquarters,
Products vehicles
Automotive parts
Hupp grille badge, on a 1941 Skylark '41 Hupp badge.JPG
Hupp grille badge, on a 1941 Skylark
1911 Hupmobile at Crawford Auto-Aviation Museum 1911 Hupmobile.jpg
1911 Hupmobile at Crawford Auto-Aviation Museum

Hupmobile was an automobile built from 1909 through 1939 by the Hupp Motor Car Company of Detroit. The prototype was developed in 1908 [1] and had its first successful run on November 8 with investors aboard for champagne at the Tuller Hotel a few blocks away. [2] The company was incorporated in November of that year. The first Hupmobile model, the Hupp 20, was introduced at the 1909 Detroit automobile show. It was an instant success.

History

Founding

1909 Model 20 Runabout 1909 Hupmobile Model 20 roadster (19363933986).jpg
1909 Model 20 Runabout
The Hupp Motor Car Company factory with a truck and three cars. (1911) Hupp Motor Car Company.png
The Hupp Motor Car Company factory with a truck and three cars. (1911)

In 1909, Bobby Hupp co-founded Hupp Motor Car Company, with Charles Hastings, formerly of Oldsmobile, who put up the first US$8,500 toward manufacturing Hupp's car. [3] They were joined by investors J. Walter Drake, Joseph Drake, John Baker, and Edwin Denby. Drake was elected president; Hupp was vice president and general manager. Emil Nelson, formerly of Oldsmobile and Packard, joined the company as chief engineer. Hastings was named assistant general manager. In late 1909 Bobby's brother, Louis Gorham Hupp left his job with the Michigan Central Railroad in Grand Rapids and joined the company. [4] [5]

Hupp Motors obtained $25,000 (equal to $711,389 today) in cash deposits at the 1909 automobile show (the lowest capitalization of Detroit's eight major car makers [6] ) to begin manufacturing the Hupp 20. The first cars were built in a small building at 345 (now 1161) Bellevue Avenue in Detroit, Michigan. The company immediately outgrew this space and began construction of a factory a few blocks away at E. Jefferson Avenue and Concord, next to the former Oldsmobile plant. [7] [8] The company produced 500 vehicles by the end of the 1909 model year (the fall of 1909). Production increased to more than 5,000 in the 1910 model year.

Henry Ford paid the Hupp 20 the ultimate compliment. "I recall looking at Bobby Hupp's roadster at the first show where it was exhibited and wondering whether we could ever build as good a small car for as little money." [9]

1912 RCH runabout 1912 RCH runabout (21476072370) (cropped).jpg
1912 RCH runabout

When Hupp left Hupp Motors in 1913, he informed the company his supplier companies would devote their full capacity to make parts for RCH. [10] Facing the loss of manufactured parts from Hupp Corporation and increasing demand for the Hupmobile, Hupp Motors acquired seven acres for a new factory at Mt. Elliott and Milwaukee. [11] It moved into the new plant in late April 1912. [12] (This factory was demolished as part of site clearance for General Motors' "Poletown" assembly plant in the early 1980s.) Hupp Motors sold the Jefferson Avenue plant to the King Motor Car Company. [13]

The “All-Steel” Hupp 32

In 1911 Hupp became one of two automakers pioneering the use of all-steel bodies, joining BSA in the U.K. [14]

Nelson approached Hale & Kilburn Company in Philadelphia looking for help with developing an all-metal body for the Hupp 32. Hale & Kilburn had pioneered the replacement of cast iron with pressed steel for many parts for the interiors of railway carriages. According to Nelson, “None of the Detroit plants would contract” to make an all-steel body for the Hupp 32. Edward Budd and Joseph Ledwinka were employed at Hale & Kilburn at the time, Budd as the general manager and Ledwinka as engineer. Budd was interested in the project. Hale & Kilburn had built some body panels for King and Paige but Budd had grander aspirations the Hupp project would permit him to pursue.

Budd and Ledwinka worked with Nelson to develop means to manufacture Nelson's design for this body. They devised a system where the body's numerous steel stampings were welded together by hand and supported by a crude system of angle iron supports that held the welded subassemblies together. The disassembled bodies were shipped by rail to Detroit where they were put back together, painted and trimmed in the Hupmobile factory. Both the touring car and a coupe were made by this process and even one Hupmobile limousine. In 1911 no one, not Nelson, Ledwinka or Budd, thought to patent the process to manufacture all-steel bodies.

1913 Model 32 Touring Car Hupmobile Model 32 (5870815158).jpg
1913 Model 32 Touring Car

While the Hupp 32 bodies were in production, Budd and Ledwinka left and formed the Edward G. Budd Manufacturing Company. In 1914, Ledwinka filed for and received a patent for the process of making all-steel bodies. However, Budd later lost a patent infringement litigation it brought against C.R. Wilson Body Company when the court held that the Ledwinka patent was invalid. "[A]fter the art had developed...Ledwinka has endeavored to go back and cover by a patent that which had become public property.... [H]e is endeavoring to bring under his patent those things which belong to the public." The court relied on the production of the Hupp 32 in 1911 as a major example of the prior art. The opinion does provide insight as to what was or was not novel about the process to manufacture the Hupp 32's body.

Several thousand all steel touring cars were made before Nelson resigned as Chief Engineer in 1912. Hupmobile's commitment to this leading edge approach did not survive his departure. The rest of the Hupp 32 production used conventional body assembly processes.

Expansion

Carl Wickman, a car dealer in Hibbing, Minnesota, used an unsold 7-passenger model as the first vehicle for what became Greyhound. [15] In 1913 Frank E. Watts was hired as a designer.

Hupp Motor Car Company continued to grow after its founder left. Hupp competed strongly against Ford and Chevrolet. DuBois Young became company president in 1924, advancing from vice-president of manufacturing. By 1928 sales had reached over 65,000 units. To increase production and handle sales growth, Hupp purchased the Chandler-Cleveland Motors Corporation (Chandler Motor Car) for its manufacturing facilities.

Decline

Sales and production began to fall even before the depression in 1930. A strategy to make the Hupmobile a larger, more expensive car began with the 1925 introduction of an 8-cylinder model, followed by the elimination of the 4-cylinder Hupmobile after 1925. (Hupmobile made only 4-cylinder cars from 1909 to 1924.) [16] While aiming for a more lucrative market segment, Hupp turned its back on its established clientele. This was the same mistake that many other medium-priced carmakers made at the same time. In an attempt to capture every possible sale, they offered many different models. With Hupmobile's low production volume, the result was that no model could be produced in sufficient quantity to achieve economy of scale.

New models

1933 Model K "cyclefender" 1933 Hupmobile K-321 Sedan (32916768376).jpg
1933 Model K "cyclefender"
1934 Model J Aero-Dynamic by Raymond Loewy Hupmobile Model J Aero-Dynamic Sedan 194 (5115120721).jpg
1934 Model J Aero-Dynamic by Raymond Loewy

Hupp abandoned its more conservatively styled product line and turned to industrial designer Raymond Loewy to design its 1932 Hupp cyclefender, a flashy roadster that did well at the track, but sales continued to decline. 1934 saw the introduction of a striking restyle called the "Aerodynamic" by Loewy, as well as the lower-priced series 417-W using Murray-built slightly-modified Ford bodies.

1938 Model E 1938 Hupmobile 822-E (5806423130).jpg
1938 Model E

Despite technical innovations, squabbles among stockholders and an attempted hostile takeover in 1935 took their toll on the company. By 1936 the company was forced to sell some of its plants and assets and in 1937 Hupmobile suspended manufacturing.

A new line of six- and eight-cylinder cars was fielded for 1938, but by this time Hupp had very few dealers, and sales were disappointingly low.

Desperate for a return to market strength, on February 8, 1938, Hupmobile acquired the production dies of the Gordon Buehrig-designed Cord 810, paying US$900,000 for the tooling. [17] Hupmobile hoped using the striking Cord design in a lower-priced conventional car, called the Skylark, would return the company to financial health. Enthusiastic orders came in by the thousands, but production delays soured customer support.

Joint venture

1941 Graham Hollywood 1941 Graham Hollywood (1410378023).jpg
1941 Graham Hollywood

Lacking adequate production facilities, Hupmobile partnered with the ailing Graham-Paige Motor Co. to share the Cord dies. Hupmobile and Graham both sold similar models, all to be built at Graham-Paige's facilities. While each marque used its own power train, the Graham edition, called the Hollywood, differed from the Skylark in a few minor details.

Closure

In 1939, deliveries of the Hupmobile Skylark finally began. [18] Unfortunately, it had taken too many years to produce and most of the orders had been canceled. Production lasted only a couple of months, and only 319 Skylarks were produced. Hupmobile ceased production in late summer. Graham-Paige suspended production shortly after the last Hupmobile rolled off the line.

Technical innovations

In a constant effort to remain competitive, Hupp introduced a number of new features. They were one of the first U.S. automakers to equip their cars with "free wheeling", a device that enjoyed immense, but brief, popularity in automobiles in the 1930s. Hupmobile also pioneered fresh-air car heaters with the Evanair-Conditioner.

Legacy

In 1914, Eric Wickman tried to establish a Hupmobile dealership but could not sell them so he started transporting miners in one of the vehicles and founded Greyhound Lines. [15] The National Football League was created at Ralph Hay's Hupmobile dealership in Canton, Ohio in 1920.

The Skylark's grille later inspired the grilles used on Lincoln Continental models in the 1940s. Their heater technology became widely adopted in the industry. Buick picked up the Skylark name for its own coupe and convertible models in 1953. The Hupmobile dealership in Omaha, Nebraska is a prominent historic landmark. [19] The dealership building in Washington, D.C. is now the H Street Playhouse.

Models

For specifications on various Hupmobile models:

See also

Related Research Articles

The REO Motor Car Company was a Lansing, Michigan-based company that produced automobiles and trucks from 1905 to 1975. At one point the company also manufactured buses on its truck platforms.

Buick Mid-level luxury division of General Motors

Buick is a division of the American automobile manufacturer General Motors (GM). Named for automotive pioneer David Dunbar Buick, it was among the first American marques of automobiles, and was the company that established General Motors in 1908. Before the establishment of General Motors, GM founder William C. Durant had served as Buick's general manager and major investor.

Cadillac Division of the U.S.-based General Motors

The Cadillac Motor Car Division is a division of the American automobile manufacturer General Motors Company (GM) that designs and builds luxury vehicles. Its major markets are the United States, Canada, and China. Cadillac models are distributed in 34 additional markets worldwide. Cadillac automobiles are at the top of the luxury field within the United States. In 2019, Cadillac sold 390,458 vehicles worldwide, a record for the brand.

The Saturn Corporation, also known as Saturn LLC, was an American automobile manufacturer, a registered trademark established on January 7, 1985, as a subsidiary of General Motors. The company marketed itself as a "different kind of car company" and operated somewhat independently from its parent company for a time with its own assembly plant in Spring Hill, Tennessee, unique models, and a separate retailer network, and was GM's attempt to compete with Japanese imports and transplants in the US compact car market.

Chalmers Automobile Defunct American car manufacturer from 1908 to 1923

Chalmers Motor Company was an American automobile company headquartered in Detroit, Michigan. It started in 1908 and continued production of high-end vehicles until 1923 when it merged with Chrysler.

Cord (automobile)

Cord was the brand name of an American luxury automobile company from Connersville, Indiana, manufactured by the Auburn Automobile Company from 1929 to 1932 and again in 1936 and 1937.

Brass Era car

The Brass Era is an American term for the early period of automotive manufacturing, named for the prominent brass fittings used during this time for such things as lights and radiators. It is generally considered to encompass 1896 through 1915, a time when these vehicles were often referred to as horseless carriages.

Terraplane

The Terraplane was a car brand and model built by the Hudson Motor Car Company of Detroit, Michigan, between 1932 and 1938. In its maiden year, the car was branded as the Essex-Terraplane; in 1934 the car became simply the Terraplane. They were inexpensive, yet powerful vehicles that were used in both town and country. The Terraplane name was used for both cars and trucks.

Edward G. Budd

Edward Gowen Budd was an American inventor and businessman.

Eisenhuth Horseless Vehicle Company American automobile manufacturer in the 1900s

Eisenhuth Horseless Vehicle Company was a manufacturer of Brass Age automobiles who were originally based in New York City. In 1902 the company purchased the Keating Wheel and Automobile Company and established manufacturing operations in Middletown, Connecticut. During 1903, the company merged with the Graham Fox Motor Car Company, absorbing that firm and expanding operations in Middletown.

Ruxton (automobile)

The Ruxton was a front-wheel drive automobile produced by the New Era Motors Company of New York, New York, United States, during 1929 and 1930. The car was the brainchild of William Muller and was built in the Board Machine plant in Philadelphia, Moon Motor Car factory in St. Louis, Missouri, and Kissel Motors of Hartford, Wisconsin, who also produced the car's transmission unit.

Graham-Paige

Graham-Paige was an American automobile manufacturer founded by brothers Joseph B. Graham, Robert C. Graham, and Ray A. Graham in 1927. Automobile production ceased in 1940, and its automotive assets were acquired by Kaiser-Frazer in 1947. As a corporate entity, the Graham-Paige name continued until 1962.

Marquette (automobile) Automobile manufacturer

Marquette was a brand used on several different automobiles, most recently on Buick's companion make.

Union (automobile)

The Union automobile was based on Lambert's "horseless carriage" gasoline buggy. It had four wheels instead of his 1891 three-wheeled version. The automobile was made by the Union Automobile Company from 1902 through 1905. There were about three hundred Union automobiles made all total.

The Monarch was an automobile built in Detroit, Michigan by the Monarch Motor Car Company from 1913 to 1917.

Steyr automobile

Steyr was an Austrian automotive brand, established in 1915 as a branch of the Österreichische Waffenfabriks-Gesellschaft (ÖWG) weapon manufacturing company. Renamed Steyr-Werke AG in 1926 and merged with Austro-Daimler and Puch into Steyr-Daimler-Puch AG, it continued manufacturing Steyr automobiles until 1959.

Joseph Ledwinka was an automobile engineer.

Citroën Type B10

The Citroën B10 is an automobile produced by Citroën at André Citroën's factory in central Paris between 1924 and 1925.

Robert Craig Hupp, commonly called "Bobby", was an American automobile engineer and company founder.

References

  1. Forbes, B.C.; Foster, O.D. (1926). "Charles D. Hastings". Automotive Giants of America. New York: Forbes Publishing Company. pp. 110–11.
  2. "Michigan Manufacturer and Financial Record". "Hupmobile a Modern Jack-o'-the-Bean-Stalk". March 18, 1916. p. 84.
  3. Wise, David Burgess. "Hupmobile: Mass-Production Pioneer", in Ward, Ian, Executive Editor. The World of Automobiles (London: Orbis, 1974), Volume 9, p. 991 caption.
  4. "Horseless Age". September 1, 1909. p. 252.; Cuthbert, Bill (2003). The Hupmobile Story From Beginning to End. Evansville, IN: M.T. Publishing Company. Ch. 2. ISBN   1-932439-13-7.
  5. Ward, James (2003). Three Men in a Hupp. Stanford, CA: Stanford University Press. Ch. 1. ISBN   0-8047-3460-7.
  6. Wise, p. 990.
  7. "Horseless Age". May 21, 1909. p. 691.
  8. "Horseless Age". July 21, 1909. p. 73.
  9. Pound, Arthur (1934). The Turning Wheel. Garden City, NY: Doubleday Doran & Company. p. 56.
  10. "The Automobile". September 28, 1911. p. 553.
  11. "The Automobile". October 19, 1911. p. 688.
  12. "Automobile Trade Journal". May 1, 1912. p. 122.
  13. "Horseless Age". April 21, 1912. p. 398.
  14. Csere, Csaba (January 1988). "10 Best Engineering Breakthroughs". Car and Driver. 33 (7)., p. 63.
  15. 1 2 Lewis, Mary Beth. "Ten Best First Facts", in Car and Driver, 1/88, p. 92.
  16. http://clubs.hemmings.com/hupmobile/models.html
  17. Connersville Chamber of Commerce Archived 2015-04-24 at the Wayback Machine Retrieved 4 May 2015.
  18. Odin, L.C. World in Motion 1939, The whole of the year's automobile production. Belvedere Publishing, 2015. ASIN   B00ZLN91ZG.
  19. "The Endangered List" Landmark News. April 2007. Retrieved 5/12/08.