Hydrogen evolution reaction

Last updated

Hydrogen evolution reaction (HER) is a chemical reaction that yields H2. [1] The conversion of protons to H2 requires reducing equivalents and usually a catalyst. In nature, HER is catalyzed by hydrogenase enzymes. Commercial electrolyzers typically employ supported platinum as the catalyst at the anode of the electrolyzer. HER is useful for producing hydrogen gas, providing a clean-burning fuel. [2] HER, however, can also be an unwelcome side reaction that competes with other reductions such as nitrogen fixation, or electrochemical reduction of carbon dioxide [3] or chrome plating.

Contents

HER in electrolysis

HER is a key reaction which occurs in the electrolysis of water for the production of hydrogen for both industrial energy applications, [4] as well as small-scale laboratory research. Due to the abundance of water on Earth, hydrogen production poses a potentially scalable process for fuel generation. This is an alternative to steam methane reforming [5] for hydrogen production, which has significant greenhouse gas emissions, and as such scientists are looking to improve and scale up electrolysis processes that have fewer emissions.

Electrolysis Mechanism

In acidic conditions, the hydrogen evolution reaction follows the formula: [6]

In neutral or alkaline conditions, the reaction follows the formula: [6]

Both of these mechanisms can be seen in industrial practices at the anode side of the electrolyzer where hydrogen evolution occurs. In acidic conditions, it is referred to as proton exchange membrane electrolysis or PEM, while in alkaline conditions it is referred to simply as alkaline electrolysis. Historically, alkaline electrolysis has been the dominant method of the two, though PEM has recently began to grow due to the higher current density that can be achieved in PEM electrolysis. [7]

Catalysts for HER

The HER process is driven forward by electricity and requires a large energy input without a highly efficient catalyst, which is a chemical which lowers the activation energy of a reaction without being consumed. In alkaline electrolyzers, Nickel and Iron based catalysts for HER are typically used at the anode. [8] The alkalinity of the electrolyte in these processes enables the use of less expensive catalysts [4] In PEM electrolyzers, the standard catalyst for HER is platinum supported on carbon, or Pt/C, [8] used at the anode. The performance of a catalyst can be characterized by the level of adsorption of hydrogen into binding sites of the metal surface, as well as the overpotential of the reaction as current density increases. [4]

Challenges

The high cost and energy input from water electrolysis poses a challenge to the large scale implementation of hydrogen power. While alkaline electroysis is commonly used, its limited current density capacity requires large electrical input, which poses both a cost and environmental concern due to the high carbon content of electricity in the many countries, including the United States [9] The electrocatalysts used for electrolysis of PEM electrolyzers currently account for about 5% of the total process cost, however, as this process is scaled up, it is predicted that catalysts costs will rise due to scarcity and become a huge factor in the cost of producing hydrogen. [10] As such, low-cost, high-efficiency, and scalable alternative materials for the HER catalysts in PEM electrolyzers are a point of research interest for scientists.

Related Research Articles

<span class="mw-page-title-main">Fuel cell</span> Device that converts the chemical energy from a fuel into electricity

A fuel cell is an electrochemical cell that converts the chemical energy of a fuel and an oxidizing agent into electricity through a pair of redox reactions. Fuel cells are different from most batteries in requiring a continuous source of fuel and oxygen to sustain the chemical reaction, whereas in a battery the chemical energy usually comes from substances that are already present in the battery. Fuel cells can produce electricity continuously for as long as fuel and oxygen are supplied.

<span class="mw-page-title-main">Electrolysis</span> Technique in chemistry and manufacturing

In chemistry and manufacturing, electrolysis is a technique that uses direct electric current (DC) to drive an otherwise non-spontaneous chemical reaction. Electrolysis is commercially important as a stage in the separation of elements from naturally occurring sources such as ores using an electrolytic cell. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity."

A regenerative fuel cell or reverse fuel cell (RFC) is a fuel cell run in reverse mode, which consumes electricity and chemical B to produce chemical A. By definition, the process of any fuel cell could be reversed. However, a given device is usually optimized for operating in one mode and may not be built in such a way that it can be operated backwards. Standard fuel cells operated backwards generally do not make very efficient systems unless they are purpose-built to do so as with high-pressure electrolysers, regenerative fuel cells, solid-oxide electrolyser cells and unitized regenerative fuel cells.

<span class="mw-page-title-main">Proton-exchange membrane fuel cell</span> Power generation technology

Proton-exchange membrane fuel cells (PEMFC), also known as polymer electrolyte membrane (PEM) fuel cells, are a type of fuel cell being developed mainly for transport applications, as well as for stationary fuel-cell applications and portable fuel-cell applications. Their distinguishing features include lower temperature/pressure ranges and a special proton-conducting polymer electrolyte membrane. PEMFCs generate electricity and operate on the opposite principle to PEM electrolysis, which consumes electricity. They are a leading candidate to replace the aging alkaline fuel-cell technology, which was used in the Space Shuttle.

A proton-exchange membrane, or polymer-electrolyte membrane (PEM), is a semipermeable membrane generally made from ionomers and designed to conduct protons while acting as an electronic insulator and reactant barrier, e.g. to oxygen and hydrogen gas. This is their essential function when incorporated into a membrane electrode assembly (MEA) of a proton-exchange membrane fuel cell or of a proton-exchange membrane electrolyser: separation of reactants and transport of protons while blocking a direct electronic pathway through the membrane.

<span class="mw-page-title-main">Electrolysis of water</span> Electricity-induced chemical reaction

Electrolysis of water is using electricity to split water into oxygen and hydrogen gas by electrolysis. Hydrogen gas released in this way can be used as hydrogen fuel, but must be kept apart from the oxygen as the mixture would be extremely explosive. Separately pressurised into convenient 'tanks' or 'gas bottles', hydrogen can be used for oxyhydrogen welding and other applications, as the hydrogen / oxygen flame can reach approximately 2,800°C.

Formic acid fuel cells (direct formic acid fuel cells or DFAFCs) are a subcategory of direct liquid-feed fuel cells (DLFCs), in which the liquid fuel is directly oxidized (electrochemically) at the anode instead of reforming to produce hydrogen. Formic acid-based fuel cells represent a promising energy supply system in terms of high volumetric energy density, theoretical energy efficiency, and theoretical open-circuit voltage. They are also able to overcome certain problems inherent to traditional hydrogen (H2) feed fuel cells such as safe handling, storage, and H2 transportation.

Hydrogen gas is produced by several industrial methods. Nearly all of the world's current supply of hydrogen is created from fossil fuels. Most hydrogen is gray hydrogen made through steam methane reforming. In this process, hydrogen is produced from a chemical reaction between steam and methane, the main component of natural gas. Producing one tonne of hydrogen through this process emits 6.6–9.3 tonnes of carbon dioxide. When carbon capture and storage is used to remove a large fraction of these emissions, the product is known as blue hydrogen.

Oxygenevolution is the process of generating molecular oxygen (O2) by a chemical reaction, usually from water. Oxygen evolution from water is effected by oxygenic photosynthesis, electrolysis of water, and thermal decomposition of various oxides. The biological process supports aerobic life. When relatively pure oxygen is required industrially, it is isolated by distilling liquefied air.

<span class="mw-page-title-main">Membrane electrode assembly</span>

A membrane electrode assembly (MEA) is an assembled stack of proton-exchange membranes (PEM) or alkali anion exchange membrane (AAEM), catalyst and flat plate electrode used in fuel cells and electrolyzers.

<span class="mw-page-title-main">High-pressure electrolysis</span>

High-pressure electrolysis (HPE) is the electrolysis of water by decomposition of water (H2O) into oxygen (O2) and hydrogen gas (H2) due to the passing of an electric current through the water. The difference with a standard proton exchange membrane (PEM) electrolyzer is the compressed hydrogen output around 12–20 megapascals (120–200 bar) at 70 °C. By pressurising the hydrogen in the electrolyser the need for an external hydrogen compressor is eliminated, the average energy consumption for internal differential pressure compression is around 3%.

<span class="mw-page-title-main">Solid oxide electrolyzer cell</span> Type of fuel cell

A solid oxide electrolyzer cell (SOEC) is a solid oxide fuel cell that runs in regenerative mode to achieve the electrolysis of water by using a solid oxide, or ceramic, electrolyte to produce hydrogen gas and oxygen. The production of pure hydrogen is compelling because it is a clean fuel that can be stored, making it a potential alternative to batteries, methane, and other energy sources. Electrolysis is currently the most promising method of hydrogen production from water due to high efficiency of conversion and relatively low required energy input when compared to thermochemical and photocatalytic methods.

<span class="mw-page-title-main">Electrocatalyst</span> Catalyst participating in electrochemical reactions

An electrocatalyst is a catalyst that participates in electrochemical reactions. Electrocatalysts are a specific form of catalysts that function at electrode surfaces or, most commonly, may be the electrode surface itself. An electrocatalyst can be heterogeneous such as a platinized electrode. Homogeneous electrocatalysts, which are soluble, assist in transferring electrons between the electrode and reactants, and/or facilitate an intermediate chemical transformation described by an overall half reaction. Major challenges in electrocatalysts focus on fuel cells.

<span class="mw-page-title-main">Microbial electrolysis cell</span>

A microbial electrolysis cell (MEC) is a technology related to Microbial fuel cells (MFC). Whilst MFCs produce an electric current from the microbial decomposition of organic compounds, MECs partially reverse the process to generate hydrogen or methane from organic material by applying an electric current. The electric current would ideally be produced by a renewable source of power. The hydrogen or methane produced can be used to produce electricity by means of an additional PEM fuel cell or internal combustion engine.

The electrochemical reduction of carbon dioxide, also known as CO2RR, is the conversion of carbon dioxide to more reduced chemical species using electrical energy. It represents one potential step in the broad scheme of carbon capture and utilization.

Water oxidation is one of the half reactions of water splitting:

A solar fuel is a synthetic chemical fuel produced from solar energy. Solar fuels can be produced through photochemical, photobiological, and electrochemical reactions.

<span class="mw-page-title-main">Proton exchange membrane electrolysis</span> Technology for splitting water molecules

Proton exchange membrane(PEM) electrolysis is the electrolysis of water in a cell equipped with a solid polymer electrolyte (SPE) that is responsible for the conduction of protons, separation of product gases, and electrical insulation of the electrodes. The PEM electrolyzer was introduced to overcome the issues of partial load, low current density, and low pressure operation currently plaguing the alkaline electrolyzer. It involves a proton-exchange membrane.

Alkaline water electrolysis is a type of electrolysis that is characterized by having two electrodes operating in a liquid alkaline electrolyte. Commonly, a solution of potassium hydroxide (KOH) or sodium hydroxide (NaOH) at 25-40 wt% is used. These electrodes are separated by a diaphragm, separating the product gases and transporting the hydroxide ions (OH−) from one electrode to the other. A recent comparison showed that state-of-the-art nickel based water electrolysers with alkaline electrolytes lead to competitive or even better efficiencies than acidic polymer electrolyte membrane water electrolysis with platinum group metal based electrocatalysts.

<span class="mw-page-title-main">Anion exchange membrane electrolysis</span> Splitting of water using a semipermeable membrane

Anion exchange membrane(AEM) electrolysis is the electrolysis of water that utilises a semipermeable membrane that conducts hydroxide ions (OH−) called an anion exchange membrane. Like a proton-exchange membrane (PEM), the membrane separates the products, provides electrical insulation between electrodes, and conducts ions. Unlike PEM, AEM conducts hydroxide ions. The major advantage of AEM water electrolysis is that a high-cost noble metal catalyst is not required, low-cost transition metal catalyst can be used instead. AEM electrolysis is similar to alkaline water electrolysis, which uses a non-ion-selective separator instead of an anion-exchange membrane.

References

  1. ↑ Zheng, Yao; Jiao, Yan; Vasileff, Anthony; Qiao, Shi-Zhang (2018). "The Hydrogen Evolution Reaction in Alkaline Solution: From Theory, Single Crystal Models, to Practical Electrocatalysts". Angewandte Chemie International Edition. 57 (26): 7568–7579. doi: 10.1002/anie.201710556 . PMID   29194903.
  2. ↑ Gray, Harry B. (2009). "Powering the planet with solar fuel". Nature Chemistry. 1 (1): 7. Bibcode:2009NatCh...1....7G. doi: 10.1038/nchem.141 . PMID   21378780.
  3. ↑ Sui, Yiming; Ji, Xiulei (2021). "Anticatalytic Strategies to Suppress Water Electrolysis in Aqueous Batteries". Chemical Reviews. 121 (11): 6654–6695. doi:10.1021/acs.chemrev.1c00191. PMID   33900728. S2CID   233409171.
  4. 1 2 3 Wang, Shan; Lu, Aolin; Zhong, Chuan-Jian (December 2021). "Hydrogen production from water electrolysis: role of catalysts". Nano Convergence. 8 (1): 4. Bibcode:2021NanoC...8....4W. doi: 10.1186/s40580-021-00254-x . ISSN   2196-5404. PMC   7878665 . PMID   33575919.
  5. ↑ Sun, Pingping; Young, Ben; Elgowainy, Amgad; Lu, Zifeng; Wang, Michael; Morelli, Ben; Hawkins, Troy (2019-06-18). "Criteria Air Pollutants and Greenhouse Gas Emissions from Hydrogen Production in U.S. Steam Methane Reforming Facilities". Environmental Science & Technology. 53 (12): 7103–7113. Bibcode:2019EnST...53.7103S. doi:10.1021/acs.est.8b06197. ISSN   0013-936X. OSTI   1546962. PMID   31039312. S2CID   141483589.
  6. 1 2 Shih, Arthur J.; Monteiro, Mariana C. O.; Dattila, Federico; Pavesi, Davide; Philips, Matthew; da Silva, Alisson H. M.; Vos, Rafaël E.; Ojha, Kasinath; Park, Sunghak; van der Heijden, Onno; Marcandalli, Giulia; Goyal, Akansha; Villalba, Matias; Chen, Xiaoting; Gunasooriya, G. T. Kasun Kalhara (2022-10-27). "Water electrolysis". Nature Reviews Methods Primers. 2 (1): 1–19. doi:10.1038/s43586-022-00164-0. hdl: 1887/3512135 . ISSN   2662-8449. S2CID   253155456.
  7. ↑ Carmo, Marcelo; Fritz, David L.; Mergel, Jürgen; Stolten, Detlef (2013-04-22). "A comprehensive review on PEM water electrolysis". International Journal of Hydrogen Energy. 38 (12): 4901–4934. Bibcode:2013IJHE...38.4901C. doi:10.1016/j.ijhydene.2013.01.151. ISSN   0360-3199.
  8. 1 2 Guo, Yujing; Li, Gendi; Zhou, Junbo; Liu, Yong (2019-12-01). "Comparison between hydrogen production by alkaline water electrolysis and hydrogen production by PEM electrolysis". IOP Conference Series: Earth and Environmental Science. 371 (4): 042022. Bibcode:2019E&ES..371d2022G. doi: 10.1088/1755-1315/371/4/042022 . ISSN   1755-1307.
  9. ↑ "Frequently Asked Questions (FAQs) - U.S. Energy Information Administration (EIA)". www.eia.gov. Retrieved 2023-11-21.
  10. ↑ Liu, Lifeng (2021-12-01). "Platinum group metal free nano-catalysts for proton exchange membrane water electrolysis". Current Opinion in Chemical Engineering. 34: 100743. doi: 10.1016/j.coche.2021.100743 . ISSN   2211-3398.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.