Infinity Systems

Last updated
Infinity Systems
Company typeSubsidiary
Industry Audio
Founded1968;56 years ago (1968) in
Los Angeles, California, U.S.
FoundersArnie Nudell, John Ulrick and Cary Christie
Headquarters,
U.S.
Products Amplifiers, loudspeakers
Parent Harman International Industries
Website www.infintyspeakers.com

Infinity Systems is an American manufacturer of loudspeakers founded in Los Angeles in 1968 and headquartered in Stamford, Connecticut. [1] Since 1983, Infinity has been part of Harman International Industries, which became a subsidiary of Samsung Electronics in 2017.

Contents

Infinity produces packages for a range of audio applications, including multichannel surround sound home theatre packages, in-wall home speakers, and marine applications. Other products include powered subwoofers and car audio amplifiers.

Infinity products are installed as an option on Hyundai and Kia vehicles, some Mitsubishi vehicles from the 1990s to 2006, and many Chrysler vehicles.[ citation needed ]

History

Founded in 1968 by Arnie Nudell, John Ulrick and Cary Christie, Infinity has produced home and mobile audio products by employing innovative materials such as neodymium magnets, mylar diaphragms, and polypropylene cones. The company's first product was the Servo-Static speaker system which, as the.[ citation needed ] Infinity had an ownership relationship with Eastern Air Devices, later known as EAD. This involved the consumer brand of KLH speakers, and Avid< Perrless drivers, and Kyocera/Cybernet (which produces electronics) In the late 1970s Infinity introduced the EMIT (electromagnetic induction tweeter) and EMIM (electromagnetic induction midrange) drivers. These were flat quasi-ribbons that worked to move air based on the principle of electromagnetic induction. The system used samarium–cobalt magnets, allowing for a very low ribbon driver mass-per-unit area. [1] Variants were made, such as the EMIT-R (radial emit), the S-EMIT (super emit) and the L-EMIM (large emim). The IRS (Infinity Reference System) was an ultra-high-end system, selling at US$65,000 in the 1980s. It consisted of 72 EMIT tweeters, 24 EMIM midrange drivers, and twelve 12-inch polypropylene woofers in four towers.

Nudell left to form Genesis Technologies, a high-end loudspeaker company, founded in Seattle in 1991. [2] Genesis' original flagship system, the 1.2, retailed for US$235,000, [3] and is basically an updated Infinity IRS system. [4]

Since the departure of Nudell, Infinity speaker designs have taken a more mass market-oriented approach. The efficient SM (Studio Monitor) series incorporated a polycell tweeter and graphite-impregnated midrange/woofers. While not as elaborate or high end as previous Infinity efforts, they filled a popular consumer niche.[ citation needed ]

Notes

  1. 1 2 Lander, David (June 20, 2012). "Arnie Nudell: From Here to Infinity". Stereophile . Retrieved July 29, 2018.
  2. "Our History". Genesis Advanced Technologies. Archived from the original on July 30, 2018. Retrieved July 29, 2018.
  3. "Speakers - Tweak Studio Chicago". Tweak Studio. Retrieved 2014-09-16.
  4. "Genesis Advanced Technologies". Genesis Advanced Technologies. Retrieved 2014-09-16.


Related Research Articles

<span class="mw-page-title-main">Loudspeaker</span> Converts an electrical audio signal into a corresponding sound

A loudspeaker is an electroacoustic transducer that converts an electrical audio signal into a corresponding sound. A speaker system, also often simply referred to as a speaker or loudspeaker, comprises one or more such speaker drivers, an enclosure, and electrical connections possibly including a crossover network. The speaker driver can be viewed as a linear motor attached to a diaphragm which couples that motor's movement to motion of air, that is, sound. An audio signal, typically from a microphone, recording, or radio broadcast, is amplified electronically to a power level capable of driving that motor in order to reproduce the sound corresponding to the original unamplified electronic signal. This is thus the opposite function to the microphone; indeed the dynamic speaker driver, by far the most common type, is a linear motor in the same basic configuration as the dynamic microphone which uses such a motor in reverse, as a generator.

<span class="mw-page-title-main">Audio crossover</span> Electronic filter circuitry used in loudspeakers

Audio crossovers are a type of electronic filter circuitry that splits an audio signal into two or more frequency ranges, so that the signals can be sent to loudspeaker drivers that are designed to operate within different frequency ranges. The crossover filters can be either active or passive. They are often described as two-way or three-way, which indicate, respectively, that the crossover splits a given signal into two frequency ranges or three frequency ranges. Crossovers are used in loudspeaker cabinets, power amplifiers in consumer electronics and pro audio and musical instrument amplifier products. For the latter two markets, crossovers are used in bass amplifiers, keyboard amplifiers, bass and keyboard speaker enclosures and sound reinforcement system equipment.

<span class="mw-page-title-main">Tweeter</span> Type of loudspeaker

A tweeter or treble speaker is a special type of loudspeaker that is designed to produce high audio frequencies, typically deliver high frequencies up to 100 kHz. The name is derived from the high pitched sounds made by some birds (tweets), especially in contrast to the low woofs made by many dogs, after which low-frequency drivers are named (woofers).

<span class="mw-page-title-main">Mid-range speaker</span> Loudspeaker driver

A mid-range speaker is a loudspeaker driver that reproduces sound in the frequency range from 250 to 2000 Hz.

A woofer or bass speaker is a technical term for a loudspeaker driver designed to produce low frequency sounds, typically from 20 Hz up to a few hundred Hz. A subwoofer can take the lower part of this range, normally up to 80 Hz. The name is from the onomatopoeic English word for a dog's deep bark, "woof". The most common design for a woofer is the electrodynamic driver, which typically uses a stiff paper cone, driven by a voice coil surrounded by a magnetic field.

Klipsch Audio Technologies is an American loudspeaker company based in Indianapolis, Indiana. Founded in Hope, Arkansas, in 1946 as 'Klipsch and Associates' by Paul W. Klipsch, the company produces loudspeaker drivers and enclosures, as well as complete loudspeakers for high-end, high-fidelity sound systems, public address applications, and personal computers.

<span class="mw-page-title-main">JBL</span> American audio hardware manufacturer

JBL is an American audio equipment manufacturer headquartered in Los Angeles, California, United States. JBL serves the customer home and professional market. The professional market includes studios, installed/tour/portable sound, music production, DJ, cinema markets. The home market includes high-end home amplification/speakers/headphones as well as high-end car audio. JBL is owned by Harman International, itself a subsidiary of Samsung Electronics.

PS Audio is an American company specializing in high-fidelity audio components equipment for audiophiles and the sound recording industry. It currently produces audio amplifiers, preamplifiers, power related products, digital-to-analog converters, streaming audio, music management software and cables.

Celestion is a British designer and exporter of professional loudspeakers.

<span class="mw-page-title-main">Rudy Bozak</span> American audio engineer

Rudolph Thomas Bozak (1910–1982) was an audio electronics and acoustics designer and engineer in the field of sound reproduction. His parents were Bohemian Czech immigrants; Rudy was born in Uniontown, Pennsylvania. Bozak studied at Milwaukee School of Engineering; in 1981, the school awarded him an honorary doctorate in engineering. Bozak married Lillian Gilleski; the two had three daughters: Lillian, Mary and Barbara.

<span class="mw-page-title-main">Full-range speaker</span> Type of loudspeaker

A full-range loudspeaker drive unit is defined as a driver which reproduces as much of the audible frequency range as possible, within the limitations imposed by the physical constraints of a specific design. The frequency range of these drivers is maximized through the use of a whizzer cone and other means. Most single driver systems, such as those in radios, or small computer speaker designs, cannot reproduce all of the audible frequencies or the entire audible audio range.

<span class="mw-page-title-main">Acoustic Research</span>

Acoustic Research was a Cambridge, Massachusetts-based company that manufactured high-end audio equipment. The brand is now owned by VOXX. Acoustic Research was known for the AR-3 series of speaker systems, which used the 12 in (300 mm) acoustic suspension woofer of the AR-1 with newly designed dome mid-range speaker and high-frequency drivers. AR's line of acoustic suspension speakers were the first loudspeakers with relatively flat response, extended bass, wide dispersion, small size, and reasonable cost. The AR Turntable remains a highly sought vinyl record player.

<span class="mw-page-title-main">Monsoon (speakers)</span>

Monsoon is a brand of loudspeakers, originally automotive speaker systems and later computer speakers. Monsoon was originally associated with OEM-sourced automotive audio speaker systems, notably supplied on a number of General Motors products and then later expanded onto other manufacturers such as Volkswagen. The brand name was also licensed to Sonigistix, a Richmond, B.C., Canada company, and applied to their line of computer multimedia speakers.

<span class="mw-page-title-main">Bi-amping and tri-amping</span> Practice of using two or three audio amplifiers to amplify different audio frequency ranges

Bi-amping and tri-amping is the practice of using two or three audio amplifiers respectively to amplify different audio frequency ranges, with the amplified signals being routed to different speaker drivers, such as woofers, subwoofers and tweeters. With bi-amping and tri-amping, an audio crossover is used to divide a sound signal into different frequency ranges, each of which is then separately amplified and routed to separate speaker drivers. In Powered speakers using bi-amping, multiple speaker drivers are in the same speaker enclosure. In some bi-amp set-ups, the drivers are in separate speaker enclosures, such as with home stereos that contain two speakers and a separate subwoofer.

The Air Motion Transformer (AMT) is a type of electroacoustic transducer. Invented by Oskar Heil (1908–1994), it operates on a different transduction principle from other loudspeaker designs, such as moving coil, planar magnetic or electrostatically-driven loudspeakers, and should not be confused with planar or true ribbon loudspeakers. In contrast to a planar ribbon loudspeaker, the diaphragm of the AMT is of pleated shape similar to a bellows. The AMT moves air laterally in a perpendicular motion using a metal-etched folded sheet made of polyethylene terephthalate (PET) film. The circuit path embossed on the PET membrane, acts as the voice coil unit. The diaphragm is then housed between 4 stacks of steel pole-plate pieces positioned at 45° within a high-intensity, quadratic, opposing magnetic field. The air motion transformer with its sheet film equally exposed at 180° behaves as a dipole speaker, exciting front and rear sonic waves simultaneously.

<span class="mw-page-title-main">Electrodynamic speaker driver</span> Individual transducer that converts an electrical audio signal to sound waves

An electrodynamic speaker driver, often called simply a speaker driver when the type is implicit, is an individual transducer that converts an electrical audio signal to sound waves. While the term is sometimes used interchangeably with the term speaker (loudspeaker), it is usually applied to specialized transducers which reproduce only a portion of the audible frequency range. For high fidelity reproduction of sound, multiple loudspeakers are often mounted in the same enclosure, each reproducing a different part of the audible frequency range. In this case the individual speakers are referred to as drivers and the entire unit is called a loudspeaker. Drivers made for reproducing high audio frequencies are called tweeters, those for middle frequencies are called mid-range drivers, and those for low frequencies are called woofers, while those for very low bass range are subwoofers. Less common types of drivers are supertweeters and rotary woofers.

A super tweeter is a speaker driver intended to produce ultra high frequencies in a multi-driver loudspeaker system. Its purpose is to recreate a more realistic sound field, often characterized as "airy-ness". Super tweeters are sometimes found in high fidelity speaker systems and sometimes even in home theater systems. They are used to supplement the sound of tweeters by reproducing frequencies which the tweeter may produce only with a narrow polar output, or perhaps with distortion.

KEF is a British company specialising in the design and production of a range of high-end audio products, including HiFi speakers, subwoofers, architecture speakers, wireless speakers, and headphones. It was founded in Maidstone, Kent in 1961 by a BBC engineer named Raymond Cooke (1925–1995).

A coaxial loudspeaker is a loudspeaker system in which the individual driver units radiate sound from the same point or axis. Two general types exist: one is a compact design using two or three speaker drivers, usually in car audio, and the other is a two-way high-power design for professional audio, also known as single-source or dual-concentric loudspeakers. The design is favored for its compactness and behavior as an audio point source.

<span class="mw-page-title-main">Linn Isobarik</span> Loudspeaker designed and manufactured by Linn Products

The Linn Isobarik, nicknamed "Bariks" or "Briks", is a loudspeaker designed and manufactured by Linn Products. The Isobarik is known for both its reproduction of low bass frequencies and being very demanding on amplifiers.