The Accelerated Graphics Port (AGP) was designed as a high-speed point-to-point channel for attaching a video card to a computer system, primarily to assist in the acceleration of 3D computer graphics. It was originally designed as a successor to PCI-type connections for video cards. Since 2004, AGP has been progressively phased out in favor of PCI Express (PCIe); by mid-2008, PCI Express cards dominated the market and only a few AGP models were available, with GPU manufacturers and add-in board partners eventually dropping support for the interface in favour of PCI Express.
HyperTransport (HT), formerly known as Lightning Data Transport (LDT), is a technology for interconnection of computer processors. It is a bidirectional serial/parallel high-bandwidth, low-latency point-to-point link that was introduced on April 2, 2001. The HyperTransport Consortium is in charge of promoting and developing HyperTransport technology.
PCI Express, officially abbreviated as PCIe or PCI-e, is a high-speed serial computer expansion bus standard, designed to replace the older PCI, PCI-X and AGP bus standards. It is the common motherboard interface for personal computers' graphics cards, hard drives, SSDs, Wi-Fi and Ethernet hardware connections. PCIe has numerous improvements over the older standards, including higher maximum system bus throughput, lower I/O pin count and smaller physical footprint, better performance scaling for bus devices, a more detailed error detection and reporting mechanism, and native hot-swap functionality. More recent revisions of the PCIe standard provide hardware support for I/O virtualization.
The AMD 700 chipset series is a set of chipsets designed by ATI for AMD Phenom processors to be sold under the AMD brand. Several members were launched in the end of 2007 and the first half of 2008, others launched throughout the rest of 2008.
In computing, Direct Media Interface (DMI) is Intel's proprietary link between the northbridge and southbridge on a computer motherboard. It was first used between the 9xx chipsets and the ICH6, released in 2004. Previous Intel chipsets had used the Hub Interface to perform the same function, and server chipsets use a similar interface called Enterprise Southbridge Interface (ESI). While the "DMI" name dates back to ICH6, Intel mandates specific combinations of compatible devices, so the presence of a DMI interface does not guarantee by itself that a particular northbridge–southbridge combination is allowed.
I/O Controller Hub (ICH) is a family of Intel southbridge microchips used to manage data communications between a CPU and a motherboard, specifically Intel chipsets based on the Intel Hub Architecture. It is designed to be paired with a second support chip known as a northbridge. As with any other southbridge, the ICH is used to connect and control peripheral devices.
The Intel X58 is an Intel chip designed to connect Intel processors with Intel QuickPath Interconnect (QPI) interface to peripheral devices. Supported processors implement the Nehalem microarchitecture and therefore have an integrated memory controller (IMC), so the X58 does not have a memory interface. Initially supported processors were the Core i7, but the chip also supported Nehalem- and Westmere based Xeon processors.
Haswell is the codename for a processor microarchitecture developed by Intel as the "fourth-generation core" successor to the Ivy Bridge microarchitecture. Intel officially announced CPUs based on this microarchitecture on June 4, 2013, at Computex Taipei 2013, while a working Haswell chip was demonstrated at the 2011 Intel Developer Forum. With Haswell, which uses a 22 nm process, Intel also introduced low-power processors designed for convertible or "hybrid" ultrabooks, designated by the "Y" suffix.
Intel 5 Series is a computing architecture introduced in 2008 that improves the efficiency and balances the use of communication channels in the motherboard. The architecture consists primarily of a central processing unit (CPU) and a single chipset. All motherboard communications and activities circle around these two devices.
FDI or Flexible Display Interface is an interconnect created by Intel in order to allow the communication of the HD Graphics integrated GPU found on supported CPUs with the PCH southbridge where display connectors are attached. It provides a path between an Intel processor and an Intel southbridge on a computer motherboard which carries display data from the graphics controller of the Intel processor package to the display connectors attached at some PCH versions. It is based on DisplayPort standard. Currently it supports 2 independent 4-bit fixed frequency links/channels/pipes at 2.7Gbit/s data rate. It was first used with the 2010 Core i3, i5 processors and H55, H57, Q57, 3450 southbridges released in 2010. FDI enabled processors require FDI enabled southbridge in order to utilize the graphics controller capability, thus boards based on P55, PM55, and P67 will not be able to take advantage of the graphics controller present on later processors. An FDI capable southbridge and CPU pair is not usable without the existence of the appropriate video connectors on the mainboard.
LGA 2011, also called Socket R, is a CPU socket by Intel. Released on November 14, 2011, it replaces Intel's LGA 1366 and LGA 1567 in the performance and high-end desktop and server platforms. The socket has 2011 protruding pins that touch contact points on the underside of the processor.
The Intel X79 is a Platform Controller Hub (PCH) designed and manufactured by Intel for their LGA 2011 and LGA 2011-1.
Skylake is the codename used by Intel for a processor microarchitecture that was launched in August 2015 succeeding the Broadwell microarchitecture. Skylake is a microarchitecture redesign using the same 14 nm manufacturing process technology as its predecessor, serving as a "tock" in Intel's "tick–tock" manufacturing and design model. According to Intel, the redesign brings greater CPU and GPU performance and reduced power consumption. Skylake CPUs share its microarchitecture with Kaby Lake, Coffee Lake and Cannon Lake CPUs.
LGA 1150, also known as Socket H3, is a microprocessor socket used by Intel's central processing units (CPUs) built on the Haswell microarchitecture. This socket is also used by the Haswell's successor, Broadwell microarchitecture.
SATA Express is a computer bus interface that supports both Serial ATA (SATA) and PCI Express (PCIe) storage devices, initially standardized in the SATA 3.2 specification. The SATA Express connector used on the host side is backward compatible with the standard SATA data connector, while it also provides two PCI Express lanes as a pure PCI Express connection to the storage device.
LGA 1151, also known as Socket H4, is an Intel microprocessor compatible socket which comes in two distinct versions: the first revision which supports both Intel's Skylake and Kaby Lake CPUs, and the second revision which supports Coffee Lake CPUs exclusively.
Intel X99, codenamed "Wellsburg", is a Platform Controller Hub (PCH) designed and manufactured by Intel, targeted at the high-end desktop (HEDT) and enthusiast segments of the Intel product lineup. The X99 chipset supports both Intel Core i7 Extreme and Intel Xeon E5-16xx v3 and E5-26xx v3 processors, which belong to the Haswell-E and Haswell-EP variants of the Haswell microarchitecture, respectively. All supported processors use the LGA 2011-v3 socket.
