Iris printer

Last updated

An Iris printer is a large-format color inkjet printer designed for prepress proofing. It was introduced in 1985 by Iris Graphics, originally of Stoneham, Massachusetts, and is currently manufactured by the Graphic Communications Group of Eastman Kodak. It is also used in the fine art reproduction market as a final output digital printing press, as in Giclée.

Contents

Prints produced by an Iris printer are commonly called Iris prints, Iris proofs or simply Irises.

History

The Iris printer was developed by Iris Graphics, Inc. originally of Stoneham, Massachusetts. Iris was founded in 1984 by two former employees of Applicon, Inc., Dieter Jochimsen and Craig Surprise, who had worked with Professor Helmuth Hertz of Lund University in Sweden, from whom Applicon had licensed the continuous-flow inkjet technology used in an Applicon-manufactured large-format printer. Jochimsen and Surprise were joined in founding Iris by John Oberteuffer and Richard Santos after being introduced by the U.S. licensing agent for Professor Hertz' inkjet patents, Arthur D. Little of Lexington, Massachusetts. The Iris model 2044 large-format printer, capable of printing on paper up to 34" × 44" (864 × 1118 mm), was first shipped in 1985. A smaller model, 3024, which supported automatic handling of 11" × 17" (279 × 432 mm) paper, was introduced at the September 1987 "Lasers in Graphics" show in Miami. The company was acquired by Scitex in 1990, which was then purchased by Creo Products Inc. in 2000. In 2005, Creo was purchased by Kodak. The Iris product line evolved into the Veris printer line.

Design

The Iris printer is an inkjet printer designed to interface with digital prepress systems to produce a hard copy that shows what the exact image will look like before the job goes to press. Such prepress output devices are used to check the image and for critical color match on industrial printing jobs such as commercial product packaging and magazine layout. Their output is also used to check color after mass production begins. Iris printers use a continuous flow ink system to produce continuous-tone dot free output. The paper used in the machine is mounted on a drum rotating at 150 inches per second. [1] Unlike most ink jet printers which fire drops only when needed, the IRIS printer's four 1-micrometer glass jets operate continuously under high pressure, vibrated by a piezoelectric crystal to produce drops at a 1 MHz rate. The droplets are given an electric charge so that the ones that are not needed to form the image are deflected electrostatically into a waste system. [1]

Use in fine art reproductions

Iris printers have also been used since the late 1980s as final output digital printing devices in the production of fine art reproductions on various media, including paper, canvas, silk, linen and other textiles. There were many printers, photographers, artists, and engineers who saw the merit in using this industrial proof printer as a way to produce high-resolution color accurate reproductions. Color engineer David Coons used the 3024 at the Walt Disney Company to print images from Disney's new computer 3D animation system. He also wrote software to print works created on desktop computers such as Sally Larsen 1989 Transformer series, and a 1990 photo exhibition for Graham Nash of Crosby, Stills, and Nash. Nash was so impressed with the quality of the Iris prints, he purchased his own Iris Graphics 3047 ink-jet printer for $126,000 to print further editions of his work and eventually set up Nash Editions, a digital reproduction company based on the Iris printer. [2] There were many problems with adapting the Iris printer to fine art printing including modifying the machines to take heavy paper stock and dealing with the poorly fade-resistant (fugitive) nature of the inks. [3]

Because of the Iris printer's connection to digital, ink-jet industrial and home/office printing, one of the print makers at Nash Editions, Jack Duganne, thought such terms might have bad connotations in the art world. He came up with a neologism for the process, the coined name "giclée". Similarly, Nash and Mac Holbert, manager of Nash Editions, came up with the name "digigraph" for this type of print.

In the 2010s the Iris printer was for the most part superseded in the fine art printing business by Epson and other large-format printers that are much cheaper than the Iris and use inks designed to be archival. [1] [4]

Notes

  1. 1 2 3 An overview of large format color digital printing, by Q.-Tuan Luong
  2. stansherer.com - "Digital Fine-Art Printing Comes of Age" (adapted from Chapter 1 of Harald Johnson's book, Mastering Digital Printing (2nd ed.), Thomson Course Technology PTR, 2005., ISBN   1-59200-431-8
  3. photography.org - The Center for Photographic Art, Interview, Mac Holbert, September 2004 Archived 2011-10-08 at the Wayback Machine
  4. gicleedirectory.com - Giclee Printing Industry Archived 2013-01-22 at the Wayback Machine

Related Research Articles

<span class="mw-page-title-main">Printer (computing)</span> Computer peripheral that prints text or graphics

In computing, a printer is a peripheral machine which makes a durable representation of graphics or text, usually on paper. While most output is human-readable, bar code printers are an example of an expanded use for printers. Different types of printers include 3D printers, inkjet printers, laser printers, and thermal printers.

<span class="mw-page-title-main">Plotter</span> Computer output device that draws lines on paper by moving a pen

A plotter is a machine that produces vector graphics drawings. Plotters draw lines on paper using a pen, or in some applications, use a knife to cut a material like vinyl or leather. In the latter case, they are sometimes known as a cutting plotter.

<span class="mw-page-title-main">Printmaking</span> Process of creating artworks by printing, normally on paper

Printmaking is the process of creating artworks by printing, normally on paper, but also on fabric, wood, metal, and other surfaces. "Traditional printmaking" normally covers only the process of creating prints using a hand processed technique, rather than a photographic reproduction of a visual artwork which would be printed using an electronic machine ; however, there is some cross-over between traditional and digital printmaking, including risograph.

<span class="mw-page-title-main">Printing</span> Process for reproducing text and images

Printing is a process for mass reproducing text and images using a master form or template. The earliest non-paper products involving printing include cylinder seals and objects such as the Cyrus Cylinder and the Cylinders of Nabonidus. The earliest known form of printing evolved from ink rubbings made on paper or cloth from texts on stone tablets, used during the sixth century. Printing by pressing an inked image onto paper appeared later that century. Later developments in printing technology include the movable type invented by Bi Sheng around 1040 AD and the printing press invented by Johannes Gutenberg in the 15th century. The technology of printing played a key role in the development of the Renaissance and the Scientific Revolution and laid the material basis for the modern knowledge-based economy and the spread of learning to the masses.

<span class="mw-page-title-main">Laser printing</span> Electrostatic digital printing process

Laser printing is an electrostatic digital printing process. It produces high-quality text and graphics by repeatedly passing a laser beam back and forth over a negatively charged cylinder called a "drum" to define a differentially charged image. The drum then selectively collects electrically charged powdered ink (toner), and transfers the image to paper, which is then heated to permanently fuse the text, imagery, or both, to the paper. As with digital photocopiers, laser printers employ a xerographic printing process. Laser printing differs from traditional xerography as implemented in analog photocopiers in that in the latter, the image is formed by reflecting light off an existing document onto the exposed drum.

<span class="mw-page-title-main">Inkjet printing</span> Type of computer printing

Inkjet printing is a type of computer printing that recreates a digital image by propelling droplets of ink onto paper and plastic substrates. Inkjet printers were the most commonly used type of printer in 2008, and range from small inexpensive consumer models to expensive professional machines. By 2019, laser printers outsold inkjet printers by nearly a 2:1 ratio, 9.6% vs 5.1% of all computer peripherals.

<span class="mw-page-title-main">Dye-sublimation printing</span> Digital printing technology with wide color range

Dye-sublimation printing is a term that covers several distinct digital computer printing techniques that involve using heat to transfer dye onto a substrate.

<span class="mw-page-title-main">Graham Nash</span> British musician (born 1942)

Graham William Nash is an English-American musician, singer and songwriter. He is known for his light tenor voice and for his contributions as a member of the Hollies and Crosby, Stills & Nash.

<span class="mw-page-title-main">Giclée</span> Fine art ink jet prints produced from digital files or artwork.

Giclée describes digital prints intended as fine art and produced by inkjet printers. The term is a neologism, ultimately derived from the French word gicleur, coined in 1991 by printmaker Jack Duganne. The name was originally applied to fine art prints created on a modified Iris printer in a process invented in the late 1980s. It has since been used widely to mean any fine-art printing, usually archival, printed by inkjet. It is often used by artists, galleries, and print shops for their high quality printing, but is also used generically for art printing of any quality.

<span class="mw-page-title-main">Digital printing</span> Method of printing

Digital printing is a method of printing from a digital-based image directly to a variety of media. It usually refers to professional printing where small-run jobs from desktop publishing and other digital sources are printed using large-format and/or high-volume laser or inkjet printers.

In printing, Preflight is the process of confirming that the digital files required for the printing process are all present, valid, correctly formatted, and of the desired type. The basic idea is to prepare the files to make them feasible for the correct process such as offset printing and eliminate costly errors and facilitate a smooth production. It is a standard prepress procedure in the printing industry. The term originates from the preflight checklists used by pilots. The term was first used in a presentation at the Color Connections conference in 1990 by consultant Chuck Weger, and Professor Ron Bertolina was a pioneer for solutions to preflighting in the 1990s.

<span class="mw-page-title-main">Inkjet paper</span> Paper designed for use with inkjet printers

Inkjet paper is a special fine paper designed for inkjet printers, typically classified by its weight, brightness and smoothness, and sometimes by its opacity.

<span class="mw-page-title-main">Solid ink</span> Type of ink used in printing

Solid ink is a type of ink used in printing. Solid ink is a waxy, resin-based polymer that must be melted prior to usage, unlike conventional liquid inks. The technology is used most often in graphics and large-format printing environments where color vividness and cost efficiency are important.

<span class="mw-page-title-main">Canvas print</span> Printing of images onto canvas

A canvas print is the result of an image printed onto canvas which is often stretched, or gallery-wrapped, onto a frame and displayed. Canvas prints are used as the final output in an art piece, or as a way to reproduce other forms of art.

<span class="mw-page-title-main">David Coons</span> Computer graphics and scanning professional

David B. Coons is a computer graphics professional and CGI pioneer.

A contract proof usually serves as an agreement between customer and printer and as a color reference guide for adjusting the press before the final press run. Most contract proofs are a prepress proof.

The Veris printer is a medium format 1500 DPI color inkjet printer manufactured by the Graphic Communications Group of Eastman Kodak, which is used for digital Prepress proofing. A refinement of the Iris printer, the Veris also uses a continuous flow ink system to produce continuous-tone output on specially designed media. Unlike most inkjet printers which fire drops only when needed, the Veris uses eight 10 micrometer glass jets that operate continuously under high pressure, vibrated by a piezoelectric crystal to produce drops at a 1 MHz rate, or 8 million drops per second in total. Drops that are not needed to form the image are deflected electrostatically into a waste collection system, and individual drops can be directed to a specific position on the media. The Veris prints with the same quality of the Iris, only faster because of the larger number of jets.

Jon Cone is a collaborative printmaker, pioneer and developer of photographic ink jet technologies, educator, and photographer. Cone is best known for the founding of the world's first digital printmaking studio, Cone Editions Press and developer of quad-black ink jet systems for printing fine black-and-white photographs including the first commercially available method of producing fine art black-and-white prints in the digital darkroom.

<span class="mw-page-title-main">Electronics for Imaging</span> American technology company

Electronics for Imaging, Inc. (EFI) is an international company based in Silicon Valley that specializes in digital printing technology. Formerly located in Foster City, California, the company is now based in Fremont. On July 1, 2015, EFI entered the textile printing marketing with the acquisition of Italian digital textile company Reggiani Macchine. On June 16, 2016, EFI acquired Optitex, a 3D digital workflow provider.

Art photography print types refers to the process and paper of how the photograph is printed and developed.

References

Further reading