 | |
| Industry | Automotive |
|---|---|
| Founded | 1903 |
| Founder | Byron J. Carter, George A. Matthews, Charles Lewis |
| Defunct | 1923 |
| Headquarters | , |
| Products | Vehicles Automotive parts |
The Jackson Automobile Company was an American Brass Era automobile manufacturer located in and named for Jackson, Michigan. The company produced the Jackson from 1903 to 1923, the 1903 Jaxon steam car and the 1904 Orlo.
Byron J. Carter operated a steam driven press and was a rubber stamp manufacturer. In 1894 Carter went into a partnership with his father selling bicycles. By 1899 he built his first gasoline automobile but focused on steam cars. By 1901 his steam car was being manufactured by the Michigan Automobile Company in Kalamazoo. A year later, Carter returned to Jackson after inventing and patenting a three-cylinder six-horsepower steam engine. Carter partnered with George A. Matthews, a buggy manufacturer and Charles Lewis, president of the Lewis Spring Axle Company, and the Jackson Automobile Company was incorporated in 1903. [1]
Full production started in 1903 with a single-cylinder engine car that closely resembled the Oldsmobile Curved Dash. The cylinder count in the engines doubled the next year, and doubled again in 1906. Not long after full production started, Carter left the firm to create the Cartercar. He left due to a disagreement with his partners, who did not wish to use the friction drive transmission he had developed. After Carter left, Jackson automobiles lacked any distinct feature, but they were well-built and long-lasting. [2] In 1910, Matthews bought out Lewis, leaving him as the sole remaining partner. Lewis left to start the Hollier car. Matthews installed his sons in the president, secretary and treasurer positions within the company.
The engines used by the company continued to grow, with a Northway six-cylinder engine becoming available in 1913, and a Ferro V8 available in 1916. Later cars resembled the contemporary Rolls-Royce. Indeed, the company used the phrase "The Car with the Keystone Radiator" in advertisements. [3]
Jackson also produced their own engines with valves in the cylinder heads and overhead camshaft. [1] By 1912 larger vehicles used a multiple metal disc type clutch running in an oil bath, with the smaller horsepower cars using the more standard leather faced cone clutches.
The 1921 Princess Coupe was a hit at the Chicago Auto Show, [3] but obtaining credit was difficult during that year's recession.
Carter further developed his automobile, eventually patenting a 3-cylinder steam engine of 6 horsepower. This became the basis of the 1903 Jaxon automobile. All Jaxons were steam-powered, with the Jackson name reserved for the gasoline-powered cars. There were two models on offer: the $975 Model A riding on a 72" wheelbase, and the $800 Model B on a 7" shorter wheelbase. Production lasted 1 year.
Advertisements proclaimed that "steam is reliable and easily understood". [4]
The Orlo was built only in 1904. The Orlo was a five-seat side-entrance model that was equipped with a 16/17 hp two-cylinder engine. The engine was located under the front seat and the drive was through a chain drive. The engine was water-cooled by a finned-coil mounted beneath the front of the bonnet. The Orlo cost $1,125.
There is some debate over whether this is actually a different marque of automobile produced by the company or just a Jackson model. It was also referred to as the Jackson Back Seat Steer. This gives new meaning to the term "back seat driver" because this is the actual location of the steering controls. The company probably introduced the car to see if having a car with the passengers seated in the front seat would be a winning sales proposition. Since this car was only around in 1913, it is not likely that there were many purchasers. [5]
Jackson did well in racing and won the Wheeler-Schebler Trophy Race which was held at the Indianapolis Motor Speedway before the first Indianapolis 500. The first race held in 1909 was originally scheduled for 300 miles but was ended at 235 miles because of the deteriorating track conditions. Out of 19 starters only five remained at the end of 200 miles and when the race was stopped, Jackson had a lead of more than two miles ahead of its nearest competitor. [1] In 1910 the Wheeler-Schebler Trophy Race was again held at the Indianapolis Motor Speedway. The winner was a specially designed six cylinder car built exclusively for racing and the Jackson stock model finishing second. [1]
The first Indianapolis 500 was held in 1911 and 46 cars entered. 25 of which had larger end engines than the Jackson entry. The four cylinder 559 cubic inch engine Jackson came in 10th overall beating out 16 cars with larger engines. The Jackson had a top speed of 75 miles an hour and was able to run continuously at this speed stopping only for tires and gas. [1]
Carter left the company in 1905 because his partners did not wish to pursue his friction drive idea. Carter went on to build the friction drive Cartercar. [1]
During World War I, car production at the firm declined by more than half, since the company was producing materiel for the war effort. For 1919, all production was geared to military supplies. Many Jackson dealers at this time converted to Jordan dealerships. When car production resumed in 1920, the cars apparently were not as good as previously. One assembly line worker said that the company engineer "should have raised chickens instead". [3]
By 1923 the newly formed Associated Motors Industries absorbed the Jackson Automobile Company, Dixie Flyer of Louisville and the National of Indianapolis. [1] Production ceased in 1924. [2]
The Overland Automobile Company was an American automobile manufacturer in Toledo, Ohio. It was the founding company of Willys-Overland and one of the earliest mass producers of automobiles.
The Knox Automobile Company was a manufacturer of automobiles in Springfield, Massachusetts, United States, between 1900 and 1914. Knox also built trucks and farm tractors until 1924. They are notable for building the very first modern fire engine in 1905, and the first American vehicle with hydraulic brakes, in 1915.
The Mors automobile factory was an early French car manufacturer. It was one of the first to take part in automobile racing, beginning in 1897, due to the belief of the company founder, Émile Mors, in racing's technical and promotional benefits. By the turn of the century, automobile racing had become largely a contest between Mors and Panhard et Levassor.
The National Motor Vehicle Company was an American manufacturer of automobiles in Indianapolis, Indiana, between 1900 and 1924. One of its presidents, Arthur C. Newby, was also one of the investors who created the Indianapolis Motor Speedway.
Northern Manufacturing Company was a manufacturer of Brass Era automobiles in Detroit, Michigan, automobiles designed by Charles Brady King. Early advertising included catchy phrases such as "Utility is the Basis for Beauty" and "Built for Business" and the famous "Silent Northern".
Waltham Manufacturing Company (WMC) was a manufacturer of bicycles, motorcycles, motorized tricycles and quadricycles, buckboards, and automobiles in Waltham, Massachusetts. It sold products under the brand names Orient, Waltham, and Waltham-Orient. The company was founded in 1893, moving to self-propelled vehicles after 1898.
The Premier Motor Manufacturing Company built the brass era and vintage Premier luxury automobile in Indianapolis, Indiana, from 1903 to 1925.
The Marion was an automobile produced by the Marion Motor Car Company in Indianapolis, Indiana from 1904 to 1915.
Cartercar was an American automotive manufacturing company established in 1905 in Jackson, Michigan, and founded by Byron J. Carter. After several relocations in other cities, Cartercar was acquired by General Motors in 1909.
The Gadabout was an American automobile from 1914 until 1916. A four-cylinder self-declared cyclecar, it had a body woven from so-called "waterproof reeds" (wicker) on a wooden frame. It has been described as "looking like a mobile wastepaper basket".
The Union automobile was a vehicle manufactured by the Union Automobile Company from 1902 until 1905. It was designed by John William Lambert, who had developed the three-wheel Buckeye gasoline buggy in 1891. Over the next decade, Lambert substantially refined the vehicle, with modifications including an additional wheel, a more powerful engine, and a new transmission system. The Union Automobile Company was formed as a subsidiary of Lambert's Buckeye Manufacturing Company solely to manufacture the Union, which took its name from Union City, Indiana, the city where it was built and which endorsed its production. In total, the company built over three hundred Union automobiles, before development shifted to the Lambert automobile, the Union's successor.
At least two different cars have been offered with the marque of Fuller, one in Nebraska and one in Michigan.
The Michigan was a brass era automobile built in Kalamazoo, Michigan by the Michigan Automobile Company, Ltd from 1903 to 1907.
Two Brass era automobiles named Richmond were produced in Richmond, Indiana. A Steam car was made by the Richmond Automobile Company in 1902 and 1903. The Wayne Works produced the Richmond automobile from 1904 to 1917.
The King was an American automobile built by the King Motor Car Company in Detroit, Michigan from 1911 to 1923, and in Buffalo, New York in 1923.
The Sandusky Automobile Company was an automobile manufacturer in Sandusky, Ohio, from 1902 to 1904. It was located at 1114 Camp Street.
The Pierce Engine Company of Racine, Wisconsin, was the manufacturer of the brass era Pierce-Racine automobile. The company was founded in 1892 and produced automobiles from 1904 to 1910.
Byron J. Carter, was an American automotive pioneer. He was a founding partner of the Jackson Automobile Company, and founder of the Cartercar Company.
The Brass era Reliance automobile was manufactured by the Reliance Automobile Manufacturing Company in Detroit, Michigan from 1904 to 1907.
The Duesenberg Model A was the first automobile in series production to have hydraulic brakes and the first automobile in series production in the United States with a straight-eight engine. Officially known as the Duesenberg Straight Eight, the Model A was first shown in late 1920 in New York City. Production was delayed by substantial changes to the design of the car, including a change in the engine valvetrain from horizontal overhead valves to an overhead camshaft; also during this time, the company had moved its headquarters and factory from New Jersey to Indiana. The Model A was manufactured in Indianapolis, Indiana, from 1921 to 1925 by the Duesenberg Automobiles and Motors Company and from 1925 to 1926 at the same factory by the restructured Duesenberg Motor Company. The successors to the company began referring to the car as the Model A when the Model J was introduced.