Javelin V6 STOL

Last updated

V6 STOL
Role Homebuilt aircraft
National origin United States
Manufacturer Javelin Aircraft
StatusProduction completed
Number builtAt least 25
Developed from Piper PA-20 Pacer

The Javelin V6 STOL is an American STOL homebuilt aircraft that was designed and produced by Javelin Aircraft of Wichita, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction. [1]

Contents

Design and development

The V6 STOL consists of plans to power an existing certified Piper PA-20 Pacer airframe with a Ford Motor Company V6 engine and moving it from the Certified Category to the Experimental Amateur-built category. [1]

The aircraft features a strut-braced high wing, a four-seat enclosed cabin accessed via doors, fixed conventional landing gear and a single engine in tractor configuration. [1]

Since it uses a standard Piper Pacer airframe, the aircraft is made from welded steel tubing, covered in doped aircraft fabric. Its 32.00 ft (9.8 m) span wing employs a USA 35B airfoil, mounts flaps and has a wing area of 168.00 sq ft (15.608 m2). The standard conversion installs a 230 hp (172 kW) Ford V6 powerplant, driving a fixed pitch propeller, although engines of up to 300 hp (224 kW) can be employed. The 230 hp (172 kW) engine gives the aircraft a sea level, standard day takeoff distance of 150 ft (46 m) and a landing distance of 300 ft (91 m). [1] [2]

The V6 STOL has a typical empty weight of 1,200 lb (540 kg) and a gross weight of 2,200 lb (1,000 kg), giving a useful load of 1,000 lb (450 kg). With full fuel of 36 U.S. gallons (140 L; 30 imp gal) the payload for pilot, passengers and baggage is 784 lb (356 kg). [1]

The manufacturer estimates the time to complete the conversion from the supplied plans as 400 hours. [1]

Operational history

In January 2014, 14 examples were registered in the United States with the Federal Aviation Administration, but a total of 25 had been registered at one time. [3] [4]

Specifications (V6 STOL)

Data from AeroCrafter and The Incomplete Guide to Airfoil Usage [1] [2]

General characteristics

Performance

Related Research Articles

Bradley Aerobat American homebuilt aircraft

The Bradley BA 100 Aerobat is an American aerobatic homebuilt aircraft that was designed and produced by Bradley Aerospace of Chico, California. When it was available the aircraft was supplied as a kit for amateur construction.

Tapanee Pegazair-100

The Pegazair-100 STOL is a two-seat STOL homebuilt aircraft developed in Canada by Tapanee Aviation, Inc. of Mont-Saint-Michel, Quebec.

St-Just Cyclone Canadian amateur-built aircraft

The St-Just Cyclone, also called the St-Just Cyclone 180, is a Canadian homebuilt aircraft that was designed and produced by St-Just Aviation of Mirabel, Quebec. The company has since moved to Boucherville, Quebec. While it was available the aircraft was supplied as a kit and in the form of plans for amateur construction.

The Harmon Der Donnerschlag is an American homebuilt aircraft that was designed and produced by Harmon Engineering of Howe, Texas. The aircraft was intended for amateur construction.

The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.

The Bounsall Super Prospector is an American STOL homebuilt aircraft that was designed and produced by Bounsall Aircraft of Mesquite, Nevada, introduced in 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

The ARV Griffin is a Canadian homebuilt aircraft that was designed by Dave Marsden of the University of Alberta and produced by Canada Air RV and later by AC Millennium Corp, both of Edmonton. When it was available the aircraft was supplied as a kit for amateur construction.

Frontier MD-II

The Frontier MD-II was an American homebuilt aircraft that was designed and supplied as a kit by Frontier Aircraft Inc of Vail, Colorado, introduced in the 1990s.

The Historical P-51 Mustang is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 62.5% scale replica of the original North American P-51 Mustang and when it was available was supplied as a kit for amateur construction.

The Historical F4U Corsair is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 60% scale replica of the original Chance-Vought F4U Corsair and when it was available was supplied as a kit for amateur construction.

The Historical P-40C Tomahawk is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 62.5% scale replica of the original Curtiss P-40C Tomahawk and when it was available was supplied as a kit for amateur construction.

Let-Mont Tulak

The Let-Mont Tulak is a Czech microlight aircraft that was designed and produced by Let-Mont sro of Vikýřovice. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft or a kit for amateur construction.

Storm 300

The Storm 300 is an Italian homebuilt aircraft that was designed and produced by Storm Aircraft of Sabaudia. Storm Aircraft was originally called SG Aviation srl. When it was available the aircraft was supplied as a kit for amateur construction.

The Time Warp Spitfire Mk V is an American homebuilt aircraft that was designed and produced by Time Warp Aircraft of Lakeland, Florida, introduced in 1996 at Sun 'n Fun. When it was available the aircraft was supplied as a kit for amateur construction.

Tri-R KIS TR-1 American homebuilt aircraft

The Tri-R KIS TR-1 is an American homebuilt aircraft that was designed by Rich Trickel and produced by Tri-R Technologies of Oxnard, California, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.

The V-STOL XC 2000T is an American homebuilt and ultralight trainer aircraft that was designed and produced by V-STOL Aircraft of Fort Myers, Florida, introduced in the fall of 1997. When it was available the aircraft was supplied as a kit for amateur construction.

The V-STOL Super Solution 2000 is an American STOL homebuilt aircraft that was designed by Dick Turner and produced by V-STOL Aircraft Corporation of Fort Myers, Florida. When it was available the aircraft was supplied as a kit for amateur construction.

The American Homebuilts John Doe is an American STOL homebuilt aircraft that was designed by Steve Nusbaum and produced by American Homebuilts of Hebron, Illinois, first flown in 1994. When it was available the aircraft was supplied as a kit for amateur construction.

Brutsche Freedom 210 STOL

The Brutsche Freedom 210 STOL was a proposed American STOL homebuilt aircraft that was designed by Neal H. Brutsche and intended to be produced by Brutsche Aircraft Corporation of Salt Lake City, Utah, introduced in the mid-1990s. The aircraft was planned to be supplied as a kit for amateur construction.

The Bradley BA-200 ATAC was an American homebuilt aircraft that was designed by Bradley Aerospace of Chico, California, introduced in the mid-1990s. The aircraft was intended to be supplied as a kit for amateur construction, but is likely that only one was constructed.

References

  1. 1 2 3 4 5 6 7 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 182. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
  2. 1 2 Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage". Archived from the original on April 20, 2010. Retrieved January 5, 2014.
  3. Federal Aviation Administration (January 5, 2014). "Make / Model Inquiry Results" . Retrieved January 5, 2014.
  4. Federal Aviation Administration (January 5, 2014). "N-Number Inquiry Results" . Retrieved January 5, 2014.