Keystone Patrician

Last updated
K-78 Patrician
Keystone Patrician.jpg
K-78D Patrician
RoleAirliner
National originUnited States
Manufacturer Keystone Aircraft
First flight1929
Number built3

The Keystone K-78 Patrician was an airliner developed in the United States in the late 1920s, built only in prototype form.

Contents

Design & development

The Patrician was a high-wing, strut-braced monoplane following the then-standard trimotor layout, and was intended to be the largest and fastest aircraft of its type. [1] The fuselage was constructed from a chromoly tube framework with aluminum longerons and bulkheads, all skinned in fabric. The inner wings were built from steel-truss spars and metal ribs and fabric-covered, while the outer wings of wooden construction.

The flight test program included a much-publicized return flight across the United States and in another stunt, a successful attempt at a load-carrying record was set by lifting a 4,600 lb (2,090 kg) "payload" of "33 girls, two pilots, and a mechanic" to 10,200 ft (3,110 m) in 25 minutes. [2] Colonial Air Transport then flew the prototype (registered NX7962) on charter operations between New York City and Boston while a definitive version for the airlines was developed under the designation K-78D. This featured 18 seats, a lavatory, and a separate baggage compartment.

The first of these machines (NC98N) was purchased by Wright Aeronautical Corporation for use as an engine testbed, but also as an executive transport. In keeping with this latter role, a deluxe interior was fitted in place of the passenger compartment, which included an office and sleeping berths. The second aircraft (NC10N) was selected for evaluation by Transcontinental Air Transport for use on a cross-United States route. TAT's technical committee, under the leadership of Charles Lindbergh, selected the Patrician over five other aircraft: the Curtiss Condor, Boeing 80A, Ford Trimotor, Fokker F.10, and a Sikorsky biplane . Lindbergh himself flew the Patrician to various stops across the United States to research routes and provide an opportunity for TAT to generate publicity for the planned service. One of these stops turned into a fiasco when the Patrician became bogged in mud while landing at Mills Field, San Francisco, requiring the various dignitaries aboard to be unloaded while the aircraft was dug out.

Certification was obtained on 30 October 1929, [3] but before the initial intended batch of ten Patricians could be produced, the Great Depression made itself felt, and the market disappeared. Keystone reduced the asking price from $90,000 to $65,000, but still found no buyers, and the three prototypes were the only Patricians ever built.

Operators

Flag of the United States.svg  United States

Specifications (K-78D)

Keystone Patrician 3-view drawing from Les Ailes December 27,1928 Keystone Patrician 3-view Les Ailes December 27,1928.png
Keystone Patrician 3-view drawing from Les Ailes December 27,1928

General characteristics

Performance

Related Research Articles

Ford Trimotor American piston three-engined transport aircraft

The Ford Trimotor is an American three-engined transport aircraft. Production started in 1925 by the companies of Henry Ford and ended on June 7, 1933. A total of 199 Ford Trimotors were made. It was designed for the civil aviation market, but also saw service with military units.

This is a list of aviation-related events from 1929:

Sikorsky S-38

The Sikorsky S-38 was an American twin-engined ten-seat sesquiplane amphibious aircraft. It was Sikorsky's first widely produced amphibious flying boat, serving successfully for Pan American Airways and the United State military.

Fokker F.VII

The Fokker F.VII, also known as the Fokker Trimotor, was an airliner produced in the 1920s by the Dutch aircraft manufacturer Fokker, Fokker's American subsidiary Atlantic Aircraft Corporation, and other companies under licence.

Boeing Model 40

The Boeing Model 40 was a United States mail plane of the 1920s. It was a single-engined biplane that was widely used for airmail services in the United States in the 1920s and 1930s, especially by airlines that later became part of United Airlines. It became the first aircraft built by the Boeing company to carry passengers.

Transcontinental Air Transport

Transcontinental Air Transport (T-A-T) was an airline founded in 1928 by Clement Melville Keys that merged in 1930 with Western Air Express to form what became TWA. Keys enlisted the help of Charles Lindbergh to design a transcontinental network to get government airmail contracts. Lindbergh established numerous airports across the country in this effort.

Pitcairn Mailwing American 1920s three-seat mail and utility biplane

The Pitcairn Mailwing family was a series of American mail carrier and three-seat sport utility biplane aircraft produced from 1927 to 1931.

Fokker Universal

The Fokker Universal was the first aircraft built in the United States that was based on the designs of Dutch-born Anthony Fokker, who had designed aircraft for the Germans during World War I. About half of the 44 Universals that were built between 1926 and 1931 in the United States were used in Canada. Among the famous pilots who flew the Fokker Universal were Punch Dickins and Walter Gilbert.

Cunningham-Hall PT-6

The Cunningham-Hall Model PT-6 was an American six-seat cabin biplane aircraft of the late 1920s and was the first design of the Cunningham-Hall Aircraft Corporation of Rochester, New York.

Naval Aircraft Factory PN

The Naval Aircraft Factory PN was a series of open cockpit American flying boats of the 1920s and 1930s. A development of the Felixstowe F5L flying boat of the First World War, variants of the PN were built for the United States Navy by Douglas, Keystone Aircraft and Martin.

Dayton-Wright Racer

The Dayton-Wright RB-1 , also known simply as the Dayton-Wright Racer was a racing aircraft developed in the United States to participate in the 1920 Gordon Bennett Cup air race. Advanced for its day, the aircraft was a high-wing monoplane with a monocoque fuselage and cantilever wing that incorporated a mechanism designed by Charles Hampson Grant to vary its camber in flight by moving the leading edge and trailing edge. The aircraft also featured a retractable undercarriage operated by a hand-crank making it one of the first instances of undercarriage retraction for aerodynamic benefit alone. The propeller shaft was mounted through a large oval radiator. The pilot had no forward view, but was provided with flexible celluloid side windows. Cockpit access was through a hatch in the top of the fuselage. A prototype was built using non-retractable gear and strut-braced wings. A shorter tapered "racing wing" was installed afterward with leading and trailing edge flaps interconnected with landing gear deployment. The mechanisms and hinges for the wing flaps were exposed across the top of the solid wing. The racing wing produced directional instability requiring small tail fins to be added.

Fairchild FC-2

The Fairchild FC-1 and its derivatives were a family of light, single-engine, high-wing utility monoplanes produced in the United States in the 1920s and 1930s. The aircraft was originally designed to provide a camera platform for Sherman Fairchild's aerial photography and survey business, Fairchild Aerial Surveys.

Keystone Pathfinder

The Keystone K-47 Pathfinder was an airliner developed in the United States in the late 1920s, built only in prototype form.

Stearman M-2 Speedmail

The Stearman M-2 Speedmail was a mail-carrier aircraft produced by the Stearman Aircraft Company of Wichita, Kansas. It first flew in January 1929. The Speedmail was a single-seat biplane, with two large cargo compartments in place of a front cockpit. The fuselage and tail unit were constructed from welded chrome-moly steel tube faired with wooden formers and fabric covered aft of the pilot's cockpit, and detachable aluminium alloy panels covered the fuselage forward of the cockpit. The wings were constructed from spruce spars and plywood built-up ribs, all fabric covered. It differed from previous Stearman aircraft by having a tailwheel instead of a tailskid due to its size and weight.

The Renard R.30 was a prototype trimotor airliner built in Belgium in 1931. It was a strut-braced high-wing monoplane of conventional design with a fully enclosed flight deck and separate passenger compartment. One engine was mounted on the nose, while the other two were mounted on the leading edges of the wings. Construction was metal throughout, skinned in plywood and fabric.

Ryan Brougham

The Ryan Brougham was a small single-engine airliner produced in the United States in the late 1920s and early 1930s. Its design was reminiscent of the M-1 mailplane first produced by Ryan in 1926, and like it, was a high-wing, strut-braced monoplane of conventional design.

The Waco G series is an American open-cockpit sporting biplane of the early 1930s.

Stout 2-AT Pullman

The Stout 2-AT Pullman, or "Air Pullman", was a single engine all-metal monoplane that was used for early airline travel and air mail transport in America.

The Solar MS-1 was an American prototype all-metal sesquiplane airliner built in 1930.

Curtiss Thrush 1929 American single-engine monoplane light transport

The Curtiss/Curtiss-Robertson Model 56 Thrush was a 1929 six passenger high-wing fixed undercarriage single-engine cabin monoplane airliner and utility transport powered by either a Curtiss Challenger or a Wright Whirlwind radial engine and built as an enlargement of the earlier Curtiss Robin. Several were used for record breaking endurance flights by female pilots during the early 1930s including one in which the aircraft stayed aloft for almost ten days.

References

Notes
  1. Air Classics
  2. Aerofiles
  3. ATC 260