L-106 Alcor | |
---|---|
Role | Glider |
National origin | United States |
Designer | Bob Lamson |
First flight | 1973 |
Introduction | 1972 |
Status | Sole example preserved in the Museum of Flight |
Primary user | Bob Lamson |
Number built | One |
The Lamson L-106 Alcor is an American, high-wing, experimental, pressurized research glider that was designed and built by Bob Lamson. The Alcor was the first pressurized sailplane ever built. [1] [2] [3] [4]
The Alcor was conceived during the 1960s as a high altitude research aircraft by Lamson. He had served in the US Army Air Corps and also worked for the Boeing Aircraft Company as a test pilot. While at Boeing during the 1940s, he worked on high-altitude oxygen systems, which led him to investigate aircraft pressurization. He attended the University of Washington. [1] [2] [3] [4]
The Alcor is named for the star in Ursa Major and was optimized for flight in weak mountain wave soaring conditions. The aircraft is constructed from Sitka spruce veneer, covered with layers of fiberglass. The wings and tail use foam sandwiches, covered in S-glass. The Alcor was one of the first gliders to be built from composites. [1] [2] [3]
The Alcor's 65.6 ft (19.99 m) span wing employs a Feifel airfoil. The pressurization system provides two to three inches of Mercury pressure differential. The cockpit also incorporates a solar heater to keep the canopy clear of ice condensation at high altitude and also provide pilot warmth. [1] [2] [3]
The Alcor was registered with the Federal Aviation Administration as completed in 1968, but reportedly first flew in 1973. In 1983 Lamson indicated that the aircraft has flown 180 hours and had exceeded 20,000 ft (6,096 m) "four or five times". [1] [2] [3] [4]
Between 1985 and 1989, the aircraft was used in southern Alberta, Canada as a research aircraft for a study of the chinook arch, proving ideal for this sort of high-altitude work. [3]
In 1992 the aircraft was transferred to the Museum of Flight in Seattle, Washington, where it is on display. [3] [4]
Data from Sailplane Directory and Soaring [1] [2] [3]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
Related lists
The Schweizer SGU 1-19 and Schweizer SGU 1-20 are a family of United States single-seat, high-wing, strut-braced, utility gliders built by Schweizer Aircraft of Elmira, New York.
The Glasflügel 604 is a high-wing, T-tailed, single seat, FAI Open Class glider that was designed and produced in West Germany by Glasflügel starting in 1970.
The DFS Weihe is a German single-seat, high-wing, 18 metre wingspan, high-performance glider that was designed by Hans Jacobs in 1937-38.
The Nelson Hummingbird PG-185B is an American, tandem two seat, mid-wing motor glider that was developed by Nelson Aircraft after discontinuing the Nelson Dragonfly.
The Laister LP-15 Nugget is an American single-seat, high-wing glider designed by Jack and Bill Laister for the FAI Standard Class.. It first flew in 1971.
The Scanlan SG-1A is an American, single seat, pod-and-boom, high-wing, strut-braced glider that was designed by Thomas W. Scanlan in 1970 and sold in the form of plans for amateur construction.
The Schreder Airmate HP-10 is an American, high wing, single seat, FAI Standard Class glider that was designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Schreder Airmate HP-11 is an American mid-wing, V-tailed, single seat glider designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Schreder HP-17 was an American mid-wing, V tailed, single seat, experimental glider designed by Richard Schreder to test a new airfoil section.
The Bock 1 is an American high-wing, strut-braced single-seat glider that was designed by John W. Bock of Long Beach, California.
The Johnson RHJ-6 Adastra was an American mid-wing, two-seat glider that was designed and constructed by Dick Johnson and first flown on 3 April 1960.
The Oldershaw O-2, officially registered as the Oldershaw Jana-Linn O-2, is an American high-wing, single seat, V-tailed glider that was designed and built by Vernon Oldershaw.
The Moore SS-1 is an American high-wing, single seat, FAI Standard Class glider that was designed and constructed by Arien C. Moore of Sweet Home, Oregon.
The Prue 215 is an American high-wing, V-tailed, single-seat glider that was designed by Irving Prue in 1949.
The Midwest MU-1 was an American single-seat, high-wing, strut-braced utility glider that was designed by Arthur B. Schultz in the 1930s.
The Stanley Nomad is an American mid-wing, V-tailed, single seat glider that was designed and constructed by Robert M. Stanley in 1938.
The Hütter Hü 17, is a German high-wing, strut-braced, single-seat, utility training glider that was designed by brothers Ulrich Hütter and Wolfgang Hütter in the 1930s.
The Schleicher Ka-4 Rhönlerche II, sometimes called the KA-4 or even K 4, is a West German high-wing, strut-braced, two-seat glider that was designed by Rudolf Kaiser and produced by Alexander Schleicher GmbH & Co.
The Schleicher Condor, also referred to as the Dittmar Condor, is a series of German high-wing, single and two-seat, gull winged, gliders that were designed by Heini Dittmar in the 1930s, produced in small quantities before the Second World War, produced again between 1952 and 1955 by Alexander Schleicher GmbH & Co and also by Ferdinand Schmetz.
The Haufe HA-G-1 Buggie is an American high-wing, strut-braced, single-seat, glider that was designed and constructed by Bruno Haufe and Klaus Hill, first flying in 1967.