Evolution | |
---|---|
General information | |
Type | Kit aircraft |
National origin | United States |
Manufacturer | Lancair Evolution Aircraft |
Status | Production completed (October 2017) |
Number built | 1 piston Evolution (2011) [1] +70 turbine Evolutions (Sep 2016) [2] |
History | |
Introduction date | July 2009 |
First flight | 21 March 2008 |
The Lancair Evolution is an American pressurized, low wing, four-place, single engine light aircraft, made from carbon fiber composite, developed by Lancair and supplied as an amateur-built kit by Evolution Aircraft. [1] [3] [4] [5]
The Evolution can be powered by a Lycoming TEO-540-A piston engine or a Pratt & Whitney PT6-135A turboprop powerplant. [1] [3] [4] [6] [7]
The Evolution was designed to meet the same FAR Part 23 aircraft certification standards that type certified aircraft comply with. The kit includes energy absorbing seats. [3]
The aircraft is pressurized and was designed for a 6.5 psi (45 kPa) differential pressure, giving an 8,000 ft (2,438 m) cabin pressure at its maximum altitude of 28,000 ft (8,534 m). [8]
The turbine version of the Evolution is powered by the 750 hp (559 kW) Pratt & Whitney PT6A-135A and has a maximum cruise of 300 kn (556 km/h) at 25,000 ft (7,620 m) on a fuel burn of 39 US gal (148 L) per hour of Jet-A. Cruising at an economy cruise of 270 kn (500 km/h) at 28,000 ft (8,534 m) it burns 23 US gal (87 L) per hour. It has a full-fuel payload of 837 lb (380 kg) and a 61 kn (113 km/h) flaps-down stall speed. [7]
The piston version is powered by a Lycoming TEO-540-A2A engine and has a maximum cruising speed of 270 kn (500 km/h) on a fuel burn of 22 US gal (83 L) per hour of avgas. At an economy cruise speed of 240 kn (444 km/h) the fuel flow is 17.5 US gal (66 L) per hour. It has a full-fuel payload of 773 lb (351 kg) and a 61 kn (113 km/h) flaps-down stall speed. [6] A second piston variant was introduced in April 2016, powered by a Lycoming iE2 engine of 350 hp (261 kW). [9]
The first customer kit was delivered on 22 July 2008, and production was planned at that time for two kits per month. [10] By December 2011, one piston model and 15 turbine models had been completed and flown. Construction time from the supplied kit is estimated as 1000 hours. [1]
In April 2017, the manufacturer announced new turboprop engine options for the design. The Evolution Turbine can be fitted with three different variants of the Pratt & Whitney PT6 turboprop powerplant producing 550 hp (410 kW), 750 hp (559 kW) and 867 hp (647 kW), respectively. The latter version cruises at 330 kn (611 km/h). [11]
The manufacturer issued a statement on 5 October 2017 indicating that they were going through a restructuring and had laid off 22 of its 49 employees on 3 October 2017. [12] The Aircraft Owners and Pilots Association reported on 19 October 2017 that the company was apparently out of business, citing inability to obtain product liability insurance following a fatal accident. [13] On 26 October 2017, Aero News Network reported that the company was "for sale. And while reports last week of the company being closed appeared to be premature, the kit maker is certainly struggling" and seeking a buyer. ANN reported also that the company has been unable to obtain insurance due to high-profile accidents. [14] On 4 November 2017, the company indicated in an interview in The Bend Bulletin, that they were still in limited operations, "focused on fulfilling customer commitments" and were seeking investors. [15] On 22 May 2018, Flying reported that the company had shut down, but that an unrelated company, Elite Pilot Services, was providing owners with technical support. [16]
Data from Manuafacturer [17]
General characteristics
Performance
The de Havilland Canada DHC-3 Otter is a single-engined, high-wing, propeller-driven, short take-off and landing (STOL) aircraft developed by de Havilland Canada. It was conceived to be capable of performing the same roles as the earlier and highly successful Beaver, including as a bush plane, but is overall a larger aircraft.
The Piper M-Class is a family of American light aircraft manufactured by Piper Aircraft of Vero Beach, Florida. The aircraft are powered by single engines and have six seats. Twentieth century production of the class was all piston engined, but turboprop versions called the M500, M600 and M700 (Fury) are now also available.
The Beechcraft 60 Duke is an American-built twin-engine, piston-driven fixed-wing aircraft designed and produced by Beechcraft. The aircraft has retractable tricycle landing gear and a pressurized cabin. The engines are turbocharged, which also pressurize the cabin with bleed air.
The Cessna 425, known as the Corsair and later as the Conquest I, is an eight-seat American pressurized turboprop twin-engined light aircraft. Now out of production, it was built by Cessna Aircraft of Wichita, Kansas, between 1980 and 1986.
The Lancair IV and IV-P are a family of four-seat, low-wing, retractable-gear, composite monoplanes powered by a 550-cubic-inch (9,000 cm3) Continental TSIO-550 twin-turbocharged piston engine.
The Van's Aircraft RV-10 is a four-seat, single-engine, low-wing homebuilt airplane sold in kit form by Van's Aircraft. It is the first four-seat airplane in the popular RV series. The RV-10 first flew on 29 May 2003, and the first kit parts were delivered to a customer in September 2003.
The Lancair Propjet is a four-seat, pressurized, composite aircraft powered by a 750-hp Walter M601E turboprop engine. The aircraft is based on Lancair's successful kit-plane, the Lancair IV. Like its piston-powered predecessor, the Propjet is noted for its performance, with a typical cruise speed of 325 knots at 24,000 feet and a climb performance of 4,000 feet per minute.
The Lancair ES is an American amateur-built aircraft that was designed and produced by Lancair. While it was in production the aircraft was supplied as a kit for amateur construction.
The Lancair Legacy, a modernized version of the Lancair 320, is a low-wing two-place retractable-gear composite monoplane manufactured by the American company Lancair. It is available as a kit that cost US$71,500 in 2011. There is also a fixed-gear version, the Legacy FG. The retractable version of the Legacy cruises at 276 mph at 8,000 ft and the fixed gear version cruises at 215 mph.
The NDN Firecracker is a single-engine aircraft designed as a military trainer.
The Wilson Private Explorer is an American-built recreational aircraft of the late 1990s.
The CubCrafters CC11-160 Carbon Cub SS is an ASTM certified light-sport aircraft based on the Piper J-3 Cub manufactured by Cub Crafters. It is modernized, with light-weight carbon fiber components and a 180 hp (130 kW) engine.
The Tecnam 2010 is a four-seat, high wing, single engine light aircraft of mixed metal and carbon-fiber-reinforced polymer construction. Designed and built in Italy, it was first presented in public in April 2011.
The Pipistrel Panthera is a lightweight, all-composite, highly efficient four-seat aircraft under development by Pipistrel of Slovenia.
The Performance Turbine Legend is an American sports monoplane designed by Performance Aircraft for sale as a kit for amateur construction.
The Epic E1000 is an American single-engine, six-seat, turboprop light aircraft developed by Epic Aircraft of Bend, Oregon.
The Diamond DART is a series of tandem, two-seat civilian and military turboprop trainers manufactured by Austrian Diamond Aircraft, "DART" meaning Diamond Aircraft Reconnaissance Trainer.
The Lancair Barracuda is an American amateur-built aircraft produced by Lancair of Uvalde, Texas. It was introduced at AirVenture in July 2018. The aircraft is supplied as a kit for amateur construction.
The Lancair Mako is an American amateur-built aircraft designed and produced by Lancair of Uvalde, Texas, introduced at AirVenture in 2017. The aircraft was first flown on 18 July 2017 and is supplied as a kit for amateur construction. It is named after the shark.
The Lancair Sentry is an American amateur-built aircraft that was designed and produced by Lancair of Redmond, Oregon, introduced in 2002. The aircraft was supplied as a kit for amateur construction, although it was also intended as a production military trainer aircraft. First flown in September 2001, only two were ever completed.