ES | |
---|---|
General information | |
Type | Homebuilt aircraft |
National origin | United States |
Manufacturer | Lancair |
Status | Production completed in 2012 |
Number built | 90 (2011) |
History | |
Developed from | Lancair IV |
Variants | Cessna 400 Lancair Mako |
The Lancair ES is an American amateur-built aircraft that was designed and produced by Lancair. While it was in production the aircraft was supplied as a kit for amateur construction. [1] [2]
Production of the aircraft kit was ended in 2012. [3]
The aircraft features a cantilever low wing, a four-seat enclosed cabin that is 46 in (117 cm) wide, fixed tricycle landing gear and a single engine in tractor configuration. [1]
The aircraft is made from composites. Its 35.5 ft (10.8 m) span wing employs a McWilliams RXM5-217 airfoil at the wing root, transitioning to a NACA 64-212 at the wingtip. The wing has an area of 140 sq ft (13 m2) and mounts flaps. The aircraft's recommended engine power range is 210 to 310 hp (157 to 231 kW) and standard engines used include the 310 hp (231 kW) Continental IO-550 four-stroke powerplant. Construction time from the supplied kit is estimated to be 2000 hours. [1] [4]
When equipped with the 310 hp (231 kW) Continental IO-550-N the design was referred to as the Lancair Super ES. This was same powerplant used in the Columbia 300 and 350. [5]
In July 2016 the company announced it would be selling the older Lancair lines of aircraft to concentrate on the Lancair Evolution instead. Once the transition is complete the company will change its name to the Evolution Aircraft Company. [6]
By December 2011, 90 examples had been completed and flown. [1] At least two examples have utilized custom engine mounts to allow installation of Lycoming IO-540 engines. [7]
Data from Kitplanes [1]
General characteristics
Performance
The Barrows Bearhawk, now also called the Bearhawk 4-Place, is an American amateur-built aircraft, designed by Bob Barrows and produced by R&B Aircraft of Fincastle, Virginia, AviPro Aircraft and now Bearhawk Aircraft of Austin, Texas. The aircraft is supplied as a kit or as plans for amateur construction.
The ADI Stallion is a US civil utility aircraft that first flew in July 1994. It is marketed in kit form for homebuilding by Aircraft Designs Inc.
The Lancair IV and IV-P are a family of four-seat, low-wing, retractable-gear, composite monoplanes powered by a 550-cubic-inch (9,000 cm3) Continental TSIO-550 twin-turbocharged piston engine.
The Velocity XL is an American amateur-built aircraft, produced by Velocity, Inc. It is an enlarged version of their Velocity SE canard pusher design.
The Van's Aircraft RV-10 is a four-seat, single-engine, low-wing homebuilt airplane sold in kit form by Van's Aircraft. It is the first four-seat airplane in the popular RV series. The RV-10 first flew on 29 May 2003, and the first kit parts were delivered to a customer in September 2003.
The Lancair Legacy, a modernized version of the Lancair 320, is a low-wing two-place retractable-gear composite monoplane manufactured by the American company Lancair. It is available as a kit that cost US$71,500 in 2011. There is also a fixed-gear version, the Legacy FG. The retractable version of the Legacy cruises at 276 mph at 8,000 ft and the fixed gear version cruises at 215 mph.
The Lancair 360 is a two-seat aircraft marketed in kit form. It is a low-wing monoplane of conventional configuration with retractable tricycle undercarriage. The Lancair Legacy was chosen to replace the Lancair 360 in 1999.
The Lancair Evolution is an American pressurized, low wing, four-place, single engine light aircraft, made from carbon fiber composite, developed by Lancair and supplied as an amateur-built kit by Evolution Aircraft.
The Questair Venture is a homebuilt aircraft manufactured by Questair at John Bell Williams Airport in Bolton, Mississippi, United States. The aircraft first flew on 1 July 1987.
The TeST TST-3 Alpin T is a Czech shoulder-wing, T-tailed, single-seat glider and motor glider that was designed and produced by TeST of Brno.
The Van's Aircraft RV-14 is an American aerobatic kit aircraft designed by Richard VanGrunsven and produced by Van's Aircraft. It was introduced at AirVenture in July 2012. The aircraft is supplied as a kit for amateur construction.
The KIS TR-4 Cruiser is a four place composite homebuilt aircraft design.
The Pegazair-100 STOL is a two-seat STOL homebuilt aircraft developed in Canada by Tapanee Aviation, Inc. of Mont-Saint-Michel, Quebec.
The Glasair GlaStar is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation. It was first flown in 1994 and was superseded in production by the Glasair Sportsman 2+2 c. 2005. When it was available the aircraft was supplied as a kit for amateur construction.
The St-Just Super-Cyclone is a Canadian amateur-built aircraft that was at one time produced by St-Just Aviation of Boucherville, Quebec. By 2023 production had passed to Bushliner Aircraft Manufacturing of Granite Falls, Washington who were building it as the Bushliner 1850EX. The aircraft is supplied as plans or as a kit for amateur construction.
The CubCrafters Carbon Cub EX is an American amateur-built aircraft, designed and produced by Cub Crafters of Yakima, Washington. The aircraft is supplied as a kit for amateur construction.
The World Aircraft Spirit is a Colombian/American amateur-built aircraft, designed by Max Tedesco and produced by World Aircraft Company. The aircraft was publicly introduced at AirVenture in 2011 and production is expected to commence in 2014. It is supplied as a kit for amateur construction or as a complete ready-to-fly aircraft.
The Lancair Tigress was an American homebuilt aircraft that was designed by Lance Neibauer and intended for production by Lancair of Redmond, Oregon. Introduced in mid-late 1990s, it was essentially a Lancair IV with a much more powerful engine. When the engine was canceled just as it was entering production, the Tigress project ended with it. Only prototypes were produced.
The Tri-R KIS TR-1 is an American homebuilt aircraft that was designed by Rich Trickel and produced by Tri-R Technologies of Oxnard, California, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.
The Lancair Barracuda is an American amateur-built aircraft produced by Lancair of Uvalde, Texas. It was introduced at AirVenture in July 2018. The aircraft is supplied as a kit for amateur construction.
{{cite journal}}
: Missing or empty |title=
(help)