This article includes a list of general references, but it remains largely unverified because it lacks sufficient corresponding inline citations .(December 2011) |
Skylark KC-3 | |
---|---|
Role | Homebuilt semi-amphibious aircraft |
National origin | United States |
Manufacturer | Larkin Aircraft Corporation |
First flight | 1973 |
Number built | 1 |
The Larkin Skylark is single-engine amphibious homebuilt aircraft. Only one aircraft was built and flown in 1973.
The Skylark is a pusher-style design with a single Volkswagen air-cooled engine above and behind the fully enclosed cockpit. The cockpit seats two occupants in side-by-side configuration, with a large Plexiglas canopy curving around both occupants. The tail is a twin-boom arrangement attached at the trailing edge of the wings, allowing clearance for the pusher propeller above and within the booms. The landing gear is a tricycle arrangement with the nose gear positioned at the foremost point of the nose and the two main gear semi-recessed into teardrop-shaped fairings on the lower sides. The fuselage and landing gear are internally supported with an aluminum tube keel. [1]
The Skylark is capable of amphibious operation when fitted with an optional V-shaped lower hull made out of fiberglass. [2]
Data from Plane & Pilot
General characteristics
Performance
Aircraft of comparable role, configuration, and era
Related lists
The Arpin A-1 was a two-seat low-wing monoplane which was powered by a single radial engine in pusher configuration, mounted behind the cabin between twin booms that carried the tail. An unconventional fixed tricycle undercarriage was fitted. Only one was built.
PZL.12 (PZL-H) was a prototype of a Polish amphibious flying boat designed and built in 1931 by Zygmunt Puławski, a pioneering Polish designer. He was killed in a crash involving this design.
The Nardi FN.333 Riviera, later the SIAI-Marchetti FN.333 Riviera, is an Italian luxury touring amphibious aircraft designed and developed by Fratelli Nardi in the 1950s and produced in small numbers by Savoia-Marchetti during the following decade.
The Kalinin K-7 was a heavy experimental aircraft designed and tested in the Soviet Union in the early 1930s. It was of unusual configuration, with twin booms and large underwing pods housing fixed landing gear and machine gun turrets. In the passenger version, seats were arranged inside the 2.3-meter thick wings. The airframe was welded from KhMA chrome-molybdenum steel. The original design called for six engines in the wing leading edge, but when the projected loaded weight was exceeded, two more engines were added to the trailing edges of the wing, one right and one left of the central passenger pod. Nemecek states in his book that at first only one further pusher engine was added.
The Osprey Osprey 2, also known as the Pereira Osprey 2 after its designer, is an amphibious sport aircraft designed for homebuilding. Plans have been sold since the mid-1970s. George Pereira designed the Osprey 2 to address the two most frequent criticisms of his Osprey I aircraft: its lack of a passenger seat and its inability to operate from dry land. An exercise that began as a series of modifications to the original design in January 1972 eventually turned into a complete redesign of the aircraft, with the resulting Osprey 2 flying in April 1973.
The Mansyū Ki-98,, was a Japanese ground-attack aircraft proposed by Mansyū during World War II for use by the Imperial Japanese Army Air Force. The still unassembled components of the first prototype were deliberately destroyed before Japan surrendered.
The Airborne Avenger is an American ultralight aircraft that was designed and produced by Airborne Wing Design in the early 1980s. The aircraft was supplied as a kit for amateur construction.
The Mitchell Wing P-38, also called the Lightning, is an American ultralight aircraft that was designed by Jim Mead and produced by Mitchell Aircraft Corporation. The aircraft was supplied as a kit for amateur construction.
The Worldwide Skyraider S/S, also called the SkyRaider S/S, is an American ultralight aircraft that was designed and produced by Worldwide Ultralite Industries in the early 1980s. The aircraft was supplied as a kit for amateur construction.
The Pinaire Ultra-Aire is an American ultralight aircraft that was designed and produced by Pinaire Engineering. The aircraft was supplied as a kit for amateur construction.
The Greenwood Witch is an American ultralight aircraft that was designed and produced by Marvin Greenwood. The aircraft was supplied as a kit for amateur construction.
The Diehl AeroNautical XTC Hydrolight is an American amphibious flying boat ultralight aircraft that was designed and produced by Diehl AeroNautical in the 1980s.
The Flylab Tucano is an Italian ultralight, produced by Flylab, of Ischitella. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft. The aircraft was produced in the 1990s by Ferrari ULM of Castelbaldo.
The Blessing Rebell was a one/two seat motorglider designed for amateur construction in Germany. Only one was built, flying for the first time in 1973 in a pusher configuration. It was later modified and flew in 1980 as a tractor aircraft.
The LFG Roland G.I was a large prototype single-engine biplane bomber built in Germany in 1915, during World War I. It had a single engine buried in the fuselage driving pusher configuration propellers mounted on outriggers.
The Schütte-Lanz G.I was a large, twin engine, pusher configuration, experimental biplane built in Germany early in World War I. Only one was completed.
The Polaris AM-FIB is an Italian amphibious flying boat ultralight trike, designed and produced by Polaris Motor of Gubbio. The aircraft was introduced in 2003 and is supplied as a complete ready-to-fly-aircraft.
The Solid Air Diamant LP is a German ultralight trike, designed and produced by Solid Air UL-Bau Franz of Hundheim, Rheinland-Pfalz. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Freedom Lite SS-11 Skywatch is a Canadian ultralight aircraft that was produced by Freedom Lite of Walton, Ontario and later by Legend Lite of New Hamburg, Ontario, introduced in 1996. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft, or as a kit for amateur construction.
The Air Command Commander 147A was an American autogyro that was designed and produced by Air Command International when it was located in Wylie, Texas. Now out of production, the aircraft was intended to be supplied as a kit for amateur construction.