Lavalier microphone

Last updated
A lavalier microphone mounted on a T-shirt Microphone SpeedLink 8701 on T-shirt.jpg
A lavalier microphone mounted on a T-shirt

A lavalier microphone or lavalier (also known as a lav, lapel mic, clip mic, body mic, collar mic, neck mic or personal mic) is a small microphone used for television, theater, and public speaking applications to allow hands-free operation. They are most commonly provided with small clips for attaching to collars, ties, or other clothing. The cord may be hidden by clothes and either run to a radio frequency transmitter kept in a pocket or clipped to a belt, or routed directly to the mixer or a recording device.

Contents

These miniature microphones are often supplied with a choice of push-on grills of differing lengths that provide gentle high-frequency boost by forming a resonant cavity. A peak of approximately 6  dB at 6–8  kHz is considered beneficial for compensating loss of clarity when chest-mounted, as is a peak of a few decibels at 10–15 kHz when mounted in the hair above the forehead. This method of boosting high frequencies does not worsen noise-performance, as electronic equalization would do.

History

Lapel microphones date from 1932. [1] Various models were made, including ones with condenser diaphragms, ribbons, moving coils, and carbon buttons. The term referred to any small microphone that could be hooked into the buttonhole of the lapel of a coat. The lapel microphone offered freedom of movement. [2]

An early use of the microphone supported by a strap around the neck: telephone operator Telephone girl.JPG
An early use of the microphone supported by a strap around the neck: telephone operator

The term lavalier originally referred to jewelry in the form of a pendant worn around the neck. Its use as the name of a type of microphone originates from the 1930s, when various practical solutions to microphone use involved hanging the microphone from the neck. For instance, a Dictaphone microphone could be suspended on a cord around the neck in order to retain some degree of freedom of movement while recording one's voice onto a wax cylinder in 1941. [3] Telephone operators and air traffic controllers used microphones that rested on the chest and were secured by a strap around the neck. In the 1950s, some microphone models were designed to be hung on a string around the neck. [4] In 1953, Electro-Voice introduced the Model 647A, a small omnidirectional dynamic microphone fitted with a cord to go around the neck. [5] The body of the 647A was lightweight at 2 ounces (57 g) and relatively small at 0.75 inches (19 mm) in diameter and 3.63 inches (92 mm) in length. [6] In 1954, Shure Brothers offered the larger 530 Slendyne, which could be handheld, mounted on a microphone stand, or worn around the neck on a "lavalier cord." [7]

Mounting techniques

Lavalier microphones are attached differently depending on the nature of their use. In theater applications where the microphone is used to amplify an actor or a singer's voice, lavs are typically concealed in the performer's hair. This placement eliminates the possibility of scratching against their clothing while they move, which would result in the amplification of the scratching sounds as well. It also adds to the suspension of disbelief, since the characters themselves would not be wearing microphones, especially if the plot is set in a time before lavalier microphones existed. Occasionally, specially designed skin-color headsets known as "headworn microphones" are used in stage applications when actors spend a good deal of their performance singing and moving around quickly, such as in stage musicals and in lecture or presentation scenarios. A headworn microphone is essentially a lavalier on a stiff wire mount that loops over the performer's ear.

In television and documentary applications, the lavalier will typically be clipped to an article of the subject's clothing, such as a tie, jacket or collar. In narrative motion picture usage, lavs are almost always hidden under clothing. The boom microphone typically sounds "better" and more natural than a lavalier mic and is always a soundperson's first choice; however, for exterior location shooting, it often may be more practical to use a lavalier. One such situation would be during a wide shot that forces the boom operator to keep a distance from the speaker that isn't close enough to achieve a good signal-to-noise ratio with the microphone. In that instance, a lav mic hidden on the speaker would achieve better signal-to-noise ratio for recording speech because of its proximity. When lavalier microphones are concealed under clothing, the clothing often scratches against the microphone. To minimize this problem, sound recordists sometimes wrap the head of the microphones in moleskin or place it inside a hollow-centered, column-shaped sponge and place it under a placard, behind a button, or within the knot of a tie.

The transmitter pack to which the microphone is attached may also need to be hidden under a person's clothing. Transmitter pouches are held on with elastic straps and serve to keep the transmitter hidden in various places where clothing provides a non-revealing space, such as high around the waist in the space created at the spine just above the belt line, inside the thigh under a skirt or dress, about the ankles under a pant leg, or even on the inside of a boot.

Academia

In a 1984 study administered by Cornell University's College of Arts and Sciences, it was found that the use of lavalier microphones in an academic setting was beneficial to the dissemination of information. By allowing a presenter to move freely in a presenting space, the lavalier microphone allows the presenter to offer continuous visual stimulation to the audience, enabling the speaker to hold their attention longer or more easily. Even in smaller applications where the audience contained fewer than 25 attendees, the lack of restrictions on the hands proved to offer similar visual stimulation in capturing and maintaining attention.[ citation needed ]

Related Research Articles

<span class="mw-page-title-main">Microphone</span> Device that converts sound into an electrical signal

A microphone, colloquially called a mic or mike, is a transducer that converts sound into an electrical signal. Microphones are used in many applications such as telephones, hearing aids, public address systems for concert halls and public events, motion picture production, live and recorded audio engineering, sound recording, two-way radios, megaphones, and radio and television broadcasting. They are also used in computers for recording voice, speech recognition, VoIP, and for other purposes such as ultrasonic sensors or knock sensors.

<span class="mw-page-title-main">Moleskin</span> Heavy, strong, napped or sheared cotton fabric with a suede-like finish

Moleskin is a heavy cotton fabric, woven and then shorn to create a short, soft pile on one side. The feel and appearance of its nap is suede-like, less plush than velour and more like felt or chamois. The word is also used for clothing made from this fabric. Clothing made from moleskin is noted for its softness and durability. Some variants of the cloth are so densely woven as to be windproof.

<span class="mw-page-title-main">Sound reinforcement system</span> Amplified sound system for public events

A sound reinforcement system is the combination of microphones, signal processors, amplifiers, and loudspeakers in enclosures all controlled by a mixing console that makes live or pre-recorded sounds louder and may also distribute those sounds to a larger or more distant audience. In many situations, a sound reinforcement system is also used to enhance or alter the sound of the sources on the stage, typically by using electronic effects, such as reverb, as opposed to simply amplifying the sources unaltered.

Shure Incorporated is an American audio products corporation. It was founded by Sidney N. Shure in Chicago, Illinois, in 1925 as a supplier of radio parts kits. The company became a consumer and professional audio-electronics manufacturer of microphones, wireless microphone systems, phonograph cartridges, discussion systems, mixers, and digital signal processing. The company also manufactures listening products, including headphones, high-end earphones, and personal monitor systems.

LAV or Lav may refer to:

<span class="mw-page-title-main">Ultimate Ears</span> American audio equipment manufacturer

Ultimate Ears is an American custom in-ear monitor (IEM), speaker, and earphone manufacturer based in Irvine and Newark, California, United States.

<span class="mw-page-title-main">Boundary microphone</span> Microphone for use on or near a surface

A boundary microphone is one or more small omnidirectional or cardioid condenser mic capsule(s) positioned near or flush with a boundary (surface) such as a floor, table, or wall. The capsule(s) are typically mounted in a flat plate or housing. The arrangement provides a directional half-space pickup pattern while delivering a relatively phase-coherent output signal.

The Shure SM58 is a professional cardioid dynamic microphone, commonly used in live vocal applications. Produced since 1966 by Shure Incorporated, it has built a strong reputation among musicians for its durability and sound, and is still considered the industry standard for live vocal performance microphones to this day. The SM58 is the most popular live vocal microphone in the world. It is a development of the SM57 microphone; in both cases, SM stands for studio microphone.

The Shure SM57 is a low-impedance cardioid dynamic microphone made by Shure Incorporated and commonly used in live sound reinforcement and studio recording. It is one of the best-selling microphones in the world. It is used extensively in amplified music and has been used for speeches by every U.S. president since its introduction in 1965. In 2004, honoring its four decades of "solid, dependable performance", it was inducted into the first-ever TEC Awards TECnology Hall of Fame.

<span class="mw-page-title-main">Wireless microphone</span> Microphone without a physical cable

A wireless microphone, or cordless microphone, is a microphone without a physical cable connecting it directly to the sound recording or amplifying equipment with which it is associated. Also known as a radio microphone, it has a small, battery-powered radio transmitter in the microphone body, which transmits the audio signal from the microphone by radio waves to a nearby receiver unit, which recovers the audio. The other audio equipment is connected to the receiver unit by cable. In one type the transmitter is contained within the handheld microphone body. In another type the transmitter is contained within a separate unit called a "bodypack", usually clipped to the user's belt or concealed under their clothes. The bodypack is connected by wire to a "lavalier microphone" or "lav", a headset or earset microphone, or another wired microphone. Most bodypack designs also support a wired instrument connection. Wireless microphones are widely used in the entertainment industry, television broadcasting, and public speaking to allow public speakers, interviewers, performers, and entertainers to move about freely while using a microphone without requiring a cable attached to the microphone.

<span class="mw-page-title-main">Carbon microphone</span>

The carbon microphone, also known as carbon button microphone, button microphone, or carbon transmitter, is a type of microphone, a transducer that converts sound to an electrical audio signal. It consists of two metal plates separated by granules of carbon. One plate is very thin and faces toward the speaking person, acting as a diaphragm. Sound waves striking the diaphragm cause it to vibrate, exerting a varying pressure on the granules, which in turn changes the electrical resistance between the plates. Higher pressure lowers the resistance as the granules are pushed closer together. A steady direct current is passed between the plates through the granules. The varying resistance results in a modulation of the current, creating a varying electric current that reproduces the varying pressure of the sound wave. In telephony, this undulating current is directly passed through the telephone wires to the central office. In public address systems it is amplified by an audio amplifier. The frequency response of most carbon microphones, however, are limited to a narrow range, and the device produces significant electrical noise.

<span class="mw-page-title-main">Mobile radio</span>

Mobile radio or mobiles refer to wireless communications systems and devices which are based on radio frequencies(using commonly UHF or VHF frequencies), and where the path of communications is movable on either end. There are a variety of views about what constitutes mobile equipment. For US licensing purposes, mobiles may include hand-carried,, equipment. An obsolete term is radiophone.

<span class="mw-page-title-main">Throat microphone</span> Type of contact microphone

A throat microphone, also called a laryngophone, is a type of contact microphone that absorbs vibrations directly from the wearer's throat by way of single or dual sensors worn against the neck. The sensors, called transducers, can pick up speech even in extremely noisy or windy environments, such as on a motorcycle or in a nightclub. Other types of microphones do not function well under these conditions because of high levels of background noise. Advanced laryngophones are able to pick up whispers, and therefore perform well in environments where communicating with others at a distance in silence is required, such as during covert military or law enforcement operations. Throat microphones are also very useful when helmets or respiratory protection is required. Many full-face SCBA, CABA, SAR Respirator, Elastomeric Respirator, N95 Respirator PAPR, or re-breather masks do not have a provision for a microphone inside the mask. The throat microphone can be used safely, as it is positioned outside the mask's face seal and as such does not compromise the respiratory protection provided by the mask, nor does it violate mask approvals and certification.

<span class="mw-page-title-main">Headset (audio)</span> Telephone or computer accessory

Headsets connect over a telephone or to a computer, allowing the user to speak and listen while keeping both hands free. They are commonly used in customer service and technical support centers, where employees can converse with customers while typing information into a computer. Also common among computer gamers are headsets, which will let them talk with each other and hear others, as well as use their keyboards and mice to play the game.

<span class="mw-page-title-main">Automixer</span> Live sound mixing device

An automixer, or automatic microphone mixer, is a live sound mixing device that automatically reduces the strength of a microphone's audio signal when it is not being used. Automixers reduce extraneous noise picked up when several microphones operate simultaneously.

The Shure Beta 58A is a rugged dynamic supercardioid microphone developed by Shure Incorporated specifically for live vocal performances. The microphone won a TEC Award in 1996 for outstanding microphone technology.

The field of language documentation in the modern context involves a complex and ever-evolving set of tools and methods, and the study and development of their use - and, especially, identification and promotion of best practices - can be considered a sub-field of language documentation proper. Among these are ethical and recording principles, workflows and methods, hardware tools, and software tools.

<span class="mw-page-title-main">Shure MV7</span> Microphone for podcasting

The Shure MV7 is a cardioid dynamic microphone used for podcasting and home studio applications. The MV7 was developed in 2020 by Shure as a digital audio reworking of the classic SM7B professional broadcasting microphone. The MV7 was rated the best podcasting microphone by Rolling Stone in their 2021 Audio Awards.

<span class="mw-page-title-main">Sennheiser MD 421</span> German dynamic microphone

The Sennheiser MD 421 is a German cardioid dynamic microphone, widely used for speech in broadcasting and for music in live concerts and the recording studio. Introduced in 1960, the internal large-diaphragm transducer element of the MD 421 is still produced unchanged by Sennheiser. The MD 421 is considered a classic, an industry standard. More than 500,000 units have been sold.

<span class="mw-page-title-main">Electro-Voice RE20</span> Professional broadcasting and music microphone

The Electro-Voice RE20 is an American professional cardioid dynamic microphone, commonly used in broadcasting applications since 1968. Designed by Electro-Voice using the company's patented Variable-D technology and a large-diaphragm element, it has been described as an industry standard "iconic" microphone for its natural sound and its wide usage in radio, television and recording studios. In 2015, the RE20 was inducted into the TEC Awards Technology Hall of Fame.

References

  1. Dummer, Geoffrey William Arnold (1997). Electronic inventions and discoveries: electronics from its earliest beginnings to the present day (4 ed.). CRC Press. p. 22. ISBN   0-7503-0493-6.
  2. Olson, H.F.; Carlisle, R.W. (December 1934). "A Lapel Microphone of the Velocity Type". Proceedings of the IRE. 22 (12): 1354–1361. doi:10.1109/JRPROC.1934.227217. S2CID   51630277.
  3. "Dictaphones Save Time of Stock Checkers Taking Inventory". Popular Science. 139 (2): 51. August 1941. ISSN   0161-7370.
  4. Olson, Harry F. (1957). Acoustical Engineering (3 ed.). Van Nostrand. p.  330.
  5. "'Lavalier' Mike". Radio & Television News. 50: 110. 1953.
  6. "Engineering Data: Model 647A Dynamic Microphone". Electro-Voice. Retrieved March 11, 2020.
  7. "Data Sheet: Model '530' Slendyne Microphone". Shure Brothers. December 1954. Retrieved March 11, 2020.