A lawn aerator is a garden tool designed to create holes in the soil in order to help lawn grasses grow. [1] In compacted lawns, aeration improves soil drainage and encourages worms, microfauna and microflora which require oxygen. [2]
A lawn aerator is a garden tool designed to create holes in the soil in order to help lawn grasses grow. [1] In compacted lawns, aeration improves soil drainage and encourages worms, microfauna and microflora which require oxygen. [2]
Lawn aeration involves controlling lawn thatch and reducing soil compaction, making grass roots multiply. Aerating either by coring or spiking causes the roots to divide or sever apart, which rarely happens naturally. Severing the roots causes them to multiply and thus the blades of grass multiply, keeping the lawn thick and deeply rooted as the holes become engorged with roots. Lawn thatch is a layer of dead organic tissue that can protect the lawn by moderating temperature and reducing evapotranspiration when it is a reasonable thickness, but too much thatch can limit soil oxygenation and reduce watering effectiveness. Soil compaction makes it difficult for grass to develop long roots and disturbs both natural rainwater and artificial irrigation. [3]
There are two types of lawn aerators:
Core/plug aerator vs. spike aerator
A spike aerator creates holes in the ground by pushing the soil sideways as wedge-shaped spikes penetrate the soil. Since there is no soil removed from the ground, watering will cause the compacted soil around the holes to expand and close. A core/plug aerator removes soil from the ground and leaves the core on the turf. This reduces compaction in the soil, and the holes can stay open for a long time allowing air, fertilisers, and water to reach the roots. Core aeration is suitable for heavy clay soils, and spike aeration is more suited to sandy or loamy soils.
Powered aerator vs. manual aerator
Powered aerators employ the power from ground propulsion to drive multiple tines into ground. The machines can aerate a large lawn in a relatively short time (similar to mowing speed).
Manual aerators usually have two to five hollow tines mounted on a step bar. The operator puts one foot on the step bar and push it downward, forcing the tines to penetrate into the soil. Then he pulls the handle on the step bar upward to remove the soil cores out of the ground. By repeating the same operation, the cores left in the tines will be pushed out by the next ones. Manual aerators are much cheaper than powered ones. The trade-off is the speed. For a typical residential lawn (1/4 acre lot), it will take hours to finish. Some products also have issues with the tines becoming clogged with soil, which can slow down the operation even more. However, a well-made manual aerator offers advantages such as ease of use, selective aeration, and economy.
Grass type determines the best time of year for aeration. Cool-season grasses (bluegrass, fescue and ryegrass) should be aerated in early spring or fall (March, April or September). Warm-season grasses (Bermudagrass, buffalograss, zoysiagrass) should be aerated in May through July. [4]
It is recommend to space aerator holes 3 inches or less apart. Given the spacing of tines on many aerator machines this means several passes could be necessary.
In agriculture, a harrow is a farm implement used for surface tillage. It is used after ploughing for breaking up and smoothing out the surface of the soil. The purpose of harrowing is to break up clods and to provide a soil structure, called tilth, that is suitable for planting seeds. Coarser harrowing may also be used to remove weeds and to cover seed after sowing.
A lawn mower is a device utilizing one or more revolving blades to cut a grass surface to an even height. The height of the cut grass may be fixed by the design of the mower but generally is adjustable by the operator, typically by a single master lever or by a mechanism on each of the machine's wheels. The blades may be powered by manual force, with wheels mechanically connected to the cutting blades so that the blades spin when the mower is pushed forward, or the machine may have a battery-powered or plug-in electric motor. The most common self-contained power source for lawn mowers is a small 4-stroke internal combustion engine. Smaller mowers often lack any form of self-propulsion, requiring human power to move over a surface; "walk-behind" mowers are self-propelled, requiring a human only to walk behind and guide them. Larger lawn mowers are usually either self-propelled "walk-behind" types or, more often, are "ride-on" mowers that the operator can sit on and control. A robotic lawn mower is designed to operate either entirely on its own or less commonly by an operator on a remote control.
Plugs in horticulture are small-sized seedlings grown in seed trays filled with potting soil. This type of plug is used for commercially raising vegetables and bedding plants. Similarly plugs may also refer to small sections of lawn grass sod. After being planted, lawn grass may somewhat spread over an adjacent area.
A rake is a broom for outside use; a horticultural implement consisting of a toothed bar fixed transversely to a handle, or tines fixed to a handle, and used to collect leaves, hay, grass, etc., and in gardening, for loosening the soil, light weeding and levelling, removing dead grass from lawns, and generally for purposes performed in agriculture by the harrow.
The broadfork, also called a U-fork or grelinette, is a garden tool used to manually break up densely packed soil, including hardpan, to improve aeration and drainage. Broadforks are used as part of a no-till or reduced-till seedbed preparation process because they preserve the soil structure and avoid the resurfacing of weed seeds.
Tribulus terrestris is an annual plant in the caltrop family (Zygophyllaceae) widely distributed around the world. It is adapted to thrive in dry climate locations in which few other plants can survive.
Tilth is a physical condition of soil, especially in relation to its suitability for planting or growing a crop. Factors that determine tilth include the formation and stability of aggregated soil particles, moisture content, degree of aeration, soil biota, rate of water infiltration and drainage. Tilth can change rapidly, depending on environmental factors such as changes in moisture, tillage and soil amendments. The objective of tillage is to improve tilth, thereby increasing crop production; in the long term, however, conventional tillage, especially plowing, often has the opposite effect, causing the soil carbon sponge to oxidize, break down and become compacted.
Linear aeration is an aeration process that allows water to penetrate the soil and to be retained in the proper amounts. Additionally, it can also add organic nutrition and soil softeners if necessary.
Soliva sessilis, one of up to nine species of the genus Soliva, is a low-growing herbaceous annual plant. Its common names include field burrweed, Onehunga-weed, lawn burrweed, lawnweed, jo-jo weed and common soliva. It is one of several plants also known as bindi weed, bindii, or bindi-eye.
In geotechnical engineering, soil compaction is the process in which stress applied to a soil causes densification as air is displaced from the pores between the soil grains. When stress is applied that causes densification due to water being displaced from between the soil grains, then consolidation, not compaction, has occurred. Normally, compaction is the result of heavy machinery compressing the soil, but it can also occur due to the passage of, for example, animal feet.
Geotechnical investigations are performed by geotechnical engineers or engineering geologists to obtain information on the physical properties of soil earthworks and foundations for proposed structures and for repair of distress to earthworks and structures caused by subsurface conditions; this type of investigation is called a site investigation. Geotechnical investigations are also used to measure the thermal resistance of soils or backfill materials required for underground transmission lines, oil and gas pipelines, radioactive waste disposal, and solar thermal storage facilities. A geotechnical investigation will include surface exploration and subsurface exploration of a site. Sometimes, geophysical methods are used to obtain data about sites. Subsurface exploration usually involves soil sampling and laboratory tests of the soil samples retrieved.
A digging bar is a long, straight metal bar used for various purposes, including as a post hole digger, to break up or loosen hard or compacted materials such as soil, rock, concrete and ice or as a lever to move objects. Known by other names depending on locale, structural features and intended purpose such as a hop bar or crowbar in Britain, Australia and New Zealand, and slate bar, shale bar, spud bar, pinch point bar or San Angelo bar in North America, or just a bar. In Hawaii, a similar, traditional wooden device known as an ‘o‘o stick is used as a digging bar in groundbreaking ceremonies. Not to be confused with a curved crowbar, which is designed to provide leverage rather than to dig.
Golf equipment encompasses the various items that are used to play the sport of golf. Types of equipment include the golf ball, golf clubs, and devices that aid in the sport.
Waste compaction is the process of compacting waste, reducing it in size. Garbage compactors and waste collection vehicles compress waste so that more of it can be stored in the same space. Waste is compacted again, more thoroughly, at the landfill to conserve valuable airspace and to extend the landfill's life span.
Sand-based athletic fields are sports turf playing fields constructed on top of sand surfaces. It is important that turf managers select the most suitable type of sand when constructing these fields, as sands with different shapes offer varied pros and cons. Regular maintenance of sand-based athletic fields is just as important as the initial construction of the field. As water and other aqueous solutions are added, a layer of thatch may accumulate on the surface of the turf. There are different ways to manage this level of thatch, however the most common are aeration and vertical mowing.
A disc harrow is a harrow whose cutting edges are a row of concave metal discs, which may be scalloped or set at an oblique angle. It is an agricultural implement that is used to till the soil where crops are to be planted. It is used to chop up unwanted weeds or crop residue. It is also one of the many soil cultivation implements alongside tilers and moldboard ploughs.
A dethatcher or lawn scarifier is a device that removes thatch from lawns. Types of dethatchers include motorized dethatchers or those that can be pulled behind a garden tractor.
Necrotic ring spot is a common disease of turf caused by soil borne fungi that mainly infects roots (4). It is an important disease as it destroys the appearance of turfgrasses on park, playing fields and golf courses. Necrotic Ring Spot is caused by a fungal pathogen that is an ascomycete that produces ascospores in an ascocarp (6). They survive over winter, or any unfavorable condition as sclerotia. Most infection occurs in spring and fall when the temperature is about 13 to 28 °C (5). The primary hosts of this disease are cool-season grasses such as Kentucky bluegrass and annual bluegrass (6). Once turf is infected with O. korrae, it kills turf roots and crowns. Symptoms of the disease are quite noticeable since they appear as large yellow ring-shaped patches of dead turf. Management of the disease is often uneasy and requires application of multiple controls. The disease can be controlled by many different kind of controls including chemicals and cultural.
In lawn care, thatch is a layer of organic matter that accumulates on a lawn around the base of the grass plants. Thatch is a combination of living and dead plant matter including crowns, stolons, rhizomes, and roots.
Soil aeration is the mechanism of exchange of gases between the atmosphere and soil. Through soil microbial activity and plant root respiration, certain gasses such as oxygen will be depleted in the soil, while others, such as carbon dioxide, will build up in the soil. Lack of oxygen in the soil can impact plant growth. In addition to allowing the exchange of gases, soil aeration allows for water drainage and root growth. A common contributor to lack of soil aeration is soil compaction.
Media related to Lawn aerators at Wikimedia Commons