Lead abatement

Last updated
Lead paint abatement Lead paint abatement.jpg
Lead paint abatement

Lead abatement includes lead-based paint abatement activities, such as inspections, risk assessments, as well as removal. Lead abatement must be performed by educated, certified professionals with proper safety protocols to limit lead exposure. The goal is to permanently eliminate lead-based paint hazards, such as serious permanent and irreversible health damage due to lead poisoning in children. This is especially important in home environments and in any facility with frequent visitation by children, particularly those built before 1978. [1] [2] [3]

Contents

Techniques

This diagram describes the different residential lead-based paint removal techniques, performed by licensed lead abatement professionals. Lead tech.jpg
This diagram describes the different residential lead-based paint removal techniques, performed by licensed lead abatement professionals.

Residential

There are various lead abatement techniques to remove residential lead-based paint and lead in household dusts. Encapsulation and enclosure makes the hazard of lead-based paint inaccessible, while chemical stripping, removal of abrasives, scraping with the hand, and component replacement are effective in permanently removing lead-based paints from households. [5] Encapsulation refers to the technique that coats all lead-contaminated surfaces with a special liquid coating, which provides a long-lasting and effective barrier and prevents lead dust particles from being released. Enclosure refers to covering all lead-contaminated surfaces and objects with a solid, dust-tight barrier, which is effective in not exposing children to harmful lead paint but is not a permanent solution. Removal is the act of scraping, stripping, vacuuming, and blasting lead-based paint from contaminated surfaces. Replacement is the simple removal and substitution of only objects contaminated with lead, such as lead-painted doors and windows. [5] However, residential lead abatement practices are relatively expensive, and some practices are ineffective and could even worsen the current situation. [4] [5]

Soils

Lead contaminated soil is one of the leading sources of lead poisoning for children in the United States. Soils with lead are especially prominent in urban landscapes and near old homes and child-occupied facilities that were built before 1978 (also known as target housing). [3] [5] Lead can get into soils via deposits from leaded gasoline (which was banned in the United States in 1996 by the Clean Air Act), degradation of leaded paint on nearby paint surfaces, exterior lead-based paint chippings and dust, and industrial sites. [5] [3] It is important that lead contaminated soils be properly disposed as soon as possible. For risk assessment, it is recommended by the US EPA that more than two dust and soil samples are taken. [3] Remediation technologies and methods for lead contaminated soils include excavation and off-site disposal to permanently remove the contaminated soils from the site, containment technologies (such as asphalt capping) to reduce human health exposure and hazards, and traditional techniques (such as washing and stabilizing soil). [5] In addition, it is important that there is a comprehensive nationwide understanding by the people of the hazards and proper removal of lead contaminated soils. Specific, official guidelines for removal or covering of lead-contaminated soil can be found in the US EPA guidance issues in 1994, also known as the Section 403 Guidance. [3]

Lead abatement vs. RRP

Lead abatement and RRP (Renovation, Repair, and Painting) activities are similar in that they are both performed in target housing and child-occupied facilities. In the United States, they are both protected under OSHA 29 CFR 1926.62 and required to post signage in lead-related work areas. [3]

However, even though the activities performed look similar, lead abatement and RRP activities are also very different. Lead abatement is a specialized activity that is performed to permanently eliminate lead-based paint hazards and is usually done based on orders from state or local governments after a serious lead-related incident. [1] [3] Meanwhile, RRP activities are only performed at the discretion and desire of the home or facility owner to temporarily minimize lead-related hazards for aesthetic or lead-unrelated purposes. [1] [3] Lead abatement techniques include encapsulation, enclosure, removal, and/or replacement, [5] while RRP activities include modification or repair of painted doors, surface restoration, window repair, surface preparation that usually produces paint dust, removal of painted building components, cutting holes in painted surfaces to install insulation, and installation of interim controls that disturb existing painted surfaces. [1] [3] Thus, RRP activities are more high risk than lead abatement techniques because they can further disturb the existing lead paint and institute more problems. [1] [3]

Rules and regulations in the United States

Lead abatement, also known as lead-based paint activities, are regulated by the United States Environmental Protection Agency (EPA). [3] Laws and policies involving lead abatement activities are enforced and kept in check by the EPA, local government, and state government. [3] All lead-based paint activities intended by state governments and facility owners must receive proper authorization from the EPA before being carried out. [3] Because working with lead poses health risks and even permanent damage to health, it is important that lead abatement workers, supervisors, inspectors, and other individuals dealing with lead-based paint strictly comply to the following regulations. Individuals performing lead abatement activities in the home environment or child-occupied facilities must be properly trained, take classes, and get certified; training programs providing instruction in such activities must be accredited and approved by the EPA; and these activities must be carried out in accordance to reliable, effective, and safe work practice standards, as defined by OSHA. [3] [6] [2] Improper lead abatement or removal by the incorrect method or by an unlicensed individual can result in severe consequences. If lead abatement is improperly managed or carried out, chips and dust can pose additional health hazards. Furthermore, the current situation can worsen as well. To prevent this, Congress passed the 1992 Residential Lead Based Paint Hazard Reduction Act of 1992, which ensures that contractors are well qualified and properly trained. [1] [3] [6]

Lead-based paints

Lead paint can crack and form flakes, which then contaminate the surrounding environment. Lead Paint - cracking and flaking.jpg
Lead paint can crack and form flakes, which then contaminate the surrounding environment.

The production and consumption of lead-based paints is a worldwide issue. Many Asian countries, especially China, depend on the import, export, production, and consumption of paints. [5] However, the paints produced in China and other Asian countries are problematic. [5] Paints used for toys, paint to make finger paint, interior and exterior wall paint, and woodenware paints are all the types of paints produced in Asian countries, particularly China. [5] Many paints contain much more lead content than regulatory standards allow. It is important to note that the regulatory standards can be misleading as well. For example, in China, the safe lead content criteria is based on soluble lead levels, not total lead levels; this can lead to paints being labeled as safe even when they contain harmful concentrations of lead. [5] It was also found in a study that colored paints have more lead concentrations than pure white paints, most likely due to lead being added for additional color enhancement. [5] As such, even with regulatory standards for lead content in paints, there are still paints with lead being produced around the world. It has been observed that paints produced in third world, developing countries contain higher lead content than those produced in first world, developed countries. [5] The production and consumption of lead-based paints is actually growing in developing countries. [5] In these developing countries, many of which do not have the proper resources, personnel, technology, and tools to remove lead from their paints. Thus, many lead-related illnesses and defects, especially in children, are arising in these countries. In order to prevent the detrimental effects of the production and consumption of lead-based paints, the United Nations Environment Program (UNEP) has initiated the Global Alliance to Eliminate Lead Paint to prevent exposure to lead through advocating the phase-out of paints containing lead. [5] Through these kinds of programs, it is important that all countries worldwide understand what lead-based paints are, what the effects and risks of lead-based paints are, what alternatives to lead-based paints there are, and what the proper removal methods and strategies are. Verification of all paint content labels, correct adjustment of regulatory standards and criteria for safe lead content in paints, and awareness and education are crucial in abating lead-based paint and its harmful effects around the world. [5]

See also

Related Research Articles

<span class="mw-page-title-main">Toxic waste</span> Any unwanted material which can cause harm

Toxic waste is any unwanted material in all forms that can cause harm. Mostly generated by industry, consumer products like televisions, computers, and phones contain toxic chemicals that can pollute the air and contaminate soil and water. Disposing of such waste is a major public health issue.

<span class="mw-page-title-main">Environmental remediation</span> Removal of pollution from soil, groundwater etc.

Environmental remediation deals with the removal of pollution or contaminants from environmental media such as soil, groundwater, sediment, or surface water. Remedial action is generally subject to an array of regulatory requirements, and may also be based on assessments of human health and ecological risks where no legislative standards exist, or where standards are advisory.

<span class="mw-page-title-main">Radioactive contamination</span> Undesirable radioactive elements on surfaces or in gases, liquids, or solids

Radioactive contamination, also called radiological pollution, is the deposition of, or presence of radioactive substances on surfaces or within solids, liquids, or gases, where their presence is unintended or undesirable.

<span class="mw-page-title-main">Lead paint</span> Paint containing lead compounds as pigments

Lead paint or lead-based paint is paint containing lead. As pigment, lead(II) chromate, lead(II,IV) oxide,, and lead(II) carbonate are the most common forms. Lead is added to paint to accelerate drying, increase durability, maintain a fresh appearance, and resist moisture that causes corrosion. It is one of the main health and environmental hazards associated with paint. Lead paint has been generally phased out of use due to the toxic nature of lead. Alternatives such as water-based, lead-free traffic paint are readily available.

<span class="mw-page-title-main">Environmental hazard</span> Harmful substance, a condition or an event

An environmental hazard is a substance, state or event which has the potential to threaten the surrounding natural environment or adversely affect people's health, including pollution and natural disasters such as storms and earthquakes. It can include any single or combination of toxic chemical, biological, or physical agents in the environment, resulting from human activities or natural processes, that may impact the health of exposed subjects, including pollutants such as heavy metals, pesticides, biological contaminants, toxic waste, industrial and home chemicals.

<span class="mw-page-title-main">Soil contamination</span> Pollution of land by human-made chemicals or other alteration

Soil contamination, soil pollution, or land pollution as a part of land degradation is caused by the presence of xenobiotic (human-made) chemicals or other alteration in the natural soil environment. It is typically caused by industrial activity, agricultural chemicals or improper disposal of waste. The most common chemicals involved are petroleum hydrocarbons, polynuclear aromatic hydrocarbons, solvents, pesticides, lead, and other heavy metals. Contamination is correlated with the degree of industrialization and intensity of chemical substance. The concern over soil contamination stems primarily from health risks, from direct contact with the contaminated soil, vapour from the contaminants, or from secondary contamination of water supplies within and underlying the soil. Mapping of contaminated soil sites and the resulting cleanups are time-consuming and expensive tasks, and require expertise in geology, hydrology, chemistry, computer modeling, and GIS in Environmental Contamination, as well as an appreciation of the history of industrial chemistry.

Mandated by the United States Department of Housing and Urban Development (HUD) standard 24 CFR Part 1330 (a) (4), Lead-Safe Work Practices provide those performing remodeling tasks in homes built before 1978 with guidelines on procedures they should be using to prevent creating a lead hazard.

<span class="mw-page-title-main">Indoor mold</span> Fungal growth that develops on wet materials

Mold or mould, also sometimes referred to as mildew, is a fungal growth that develops on wet materials. Mold is a natural part of the environment and plays an important part in nature by breaking down dead organic matter such as fallen leaves and dead trees; indoors, mold growth should be avoided. Mold reproduces by means of tiny spores. The spores are like seeds, but invisible to the naked eye, that float through the air and deposit on surfaces. When the temperature, moisture, and available nutrient conditions are correct, the spores can form into new mold colonies where they are deposited. There are many types of mold, but all require moisture and a food source for growth.

The National Center for Healthy Housing (NCHH) is a national nonprofit organization dedicated to creating safe and healthy housing for American families. Its research often provides a scientific basis for federal, state, and local policies and programs. NCHH trained nearly 45,000 individuals in healthy housing practices from 2005 through 2014. NCHH's advocacy efforts aim to ensure that health is considered in housing policy and that housing is valued as a determinant of health. Through partnerships, NCHH seeks to reduce health disparities in low-income communities and communities of color. Founded by Fannie Mae in 1992, it was originally known as the National Center for Lead-Safe Housing. NCHH's main office is based in downtown Columbia, Maryland.

<span class="mw-page-title-main">Tar Creek Superfund site</span>

Tar Creek Superfund site is a United States Superfund site, declared in 1983, located in the cities of Picher, Douthat and Cardin, Ottawa County, in northeastern Oklahoma. From 1900 to the 1960s lead mining and zinc mining companies left behind huge open chat piles that were heavily contaminated by these metals, cadmium, and others. Metals from the mining waste leached into the soil, and seeped into groundwater, ponds, and lakes. Because of the contamination, Picher children have suffered elevated lead, zinc and manganese levels, resulting in learning disabilities and a variety of other health problems. The EPA declared Picher to be one of the most toxic areas in the United States.

<span class="mw-page-title-main">California Office of Environmental Health Hazard Assessment</span>

The Office of Environmental Health Hazard Assessment, commonly referred to as OEHHA, is a specialized department within the cabinet-level California Environmental Protection Agency (CalEPA) with responsibility for evaluating health risks from environmental chemical contaminants.

<span class="mw-page-title-main">Lead-based paint in the United States</span> Manufacture of banned in 1978 though widely used because of its durability.

Lead-based paint was widely used in the United States because of its durability. The United States banned the manufacture of lead-based house paint in 1978 due to health concerns.

MT2 Firing Range Services - Metals Treatment Technologies is an American LLC, based in Arvada, Colorado that provides environmental firing range services, and lead remediation services. Founded August 4, 2000 the company seeks to continue development, distribute, and deploy heavy metals treatment technologies for firing ranges and at contaminated sites. The proprietary technology for those is implemented under the brand name ECOBOND. MT2 is listed as a technology vendor on the EPA website for contaminated site Cleanup-Information, as well as the Interstate Technology and Regulatory Council's "Technical/Regulatory Guidelines, Characterization and Remediation of Soils at Closed Small Arms Firing Ranges."

Encasement is the coating over, covering or "encasing" of all building components, interior and exterior. This includes all roofing and toxic hazards materials, such as asbestos, lead-based paint, mold/mildew and other harmful substances, found in buildings. The technique of encasing all building components, including unsafe ones, with green coatings is by far the most efficient way to reduce the harmful effects on people and the environment while lengthening the life of buildings. It is an economical alternative to other abatement methods such as removal, disposal and replacement.

The Stoker Company is a producer and applier of pesticides and a crop dusting loading facility, located in Imperial County, California, approximately 25 miles from the Mexican border. It is currently listed as a Superfund site because pesticides developed and used there are considered a human health hazard due to long-term exposure that may cause adverse health effects. Beginning in 1966, operations have caused on-site and off-site pesticide contamination to surface soil, water, and air.

Lead contamination in Oakland represents a serious and persistent public health threat. Lead contamination in modern Oakland comes from three primary sources: remnants from previous industry, deposits from leaded gasoline, and paint chips from leaded paints. Significant portions of the City of Oakland, California have soil lead levels far in excess of 400 ppm, the level at which the US EPA suggests remedial action be taken, and far higher than 80 ppm, the level at which California’s Office of Environmental Health Hazard Assessment suggests action should be taken. Not all areas of Oakland are affected equally: West Oakland's contamination is especially severe, particularly near the former Oakland Army Base, and many of Oakland's poorer neighborhoods also suffer disproportionately.

<span class="mw-page-title-main">Lead abatement in the United States</span>

Lead abatement is an activity to reduce levels of lead, particularly in the home environment, generally to permanently eliminate lead-based paint hazards, in order to reduce or eliminate incidents of lead poisoning.

The Horseshoe Road Complex Superfund Site in Sayreville, New Jersey is a 12-acre property located near the Raritan River. The industrial site has been out of operation since the early 1980s after a fire revealed 70 drums containing silver cyanide, ethyl acetate, and acetonitrile. The drums caught the attention of the Environmental Protection Agency (EPA) and by 1995 the Horseshoe Road Complex was on the National Priorities List. The site had three areas consisting of the Atlantic Development Corporation (ADC), Horseshoe Road Drum Dump, and Sayreville Pesticide Dump. The neighboring Atlantic Resources Corporation, the location for precious metal recovery, is addressed with the Horseshoe Road Complex (HRC) site due to the intermixing of chemical contamination. The on-site contamination is not an immediate threat to the surrounding community, although prolonged or repeated exposure to the site itself, will result in health effects. The HRC Superfund site is now in its final steps of cleanup in accordance to the EPA's plan.

Brook Industrial Park (BIP) is an industrial area occupying 4.5 acres of the Borough of Bound Brook, New Jersey, in the United States of America. It is located on the northern bank of the Raritan River. Industrial, chemical and pesticide operations began in 1971 and eventually lead to the contamination of groundwater and exposure of workers to harmful dioxins. Throughout 1980 to 1988 the United States Environmental Protection Agency (EPA) and the New Jersey Department of Environmental Protection (NJDEP) conducted studies to determine if there were any threats being posed on the workers, community or environment by the BIP companies in their disposal of processed and stored chemicals.

<span class="mw-page-title-main">Raritan Bay Slag Superfund Site</span>

The Raritan Bay Slag Superfund Site consists of a seawall along the coast of the Raritan Bay in the Laurence Harbor section of Old Bridge Township, New Jersey, United States. The seawall itself is made of slag. In this seawall, are large concentrations of lead, antimony, arsenic, and copper. The lead in particular has contaminated the nearby soil and surface water. The slag deposits are a by-product from NL Industries, a lead smelting company, dumping its wastes in the Raritan River. The New Jersey Department of Environmental Protection (NJDEP) investigated the area and found large concentrations of metals to be dangerous to human health. The NJDEP called the United States Environmental Protection Agency (EPA) to investigate the area further, which resulted in some of the slag being physically removed and the toxic areas being fenced off.

References

  1. 1 2 3 4 5 6 "Lead Abatement vs. Lead RRP". US EPA: Lead. United States Environmental Protection Agency. December 28, 2015.{{cite web}}: CS1 maint: url-status (link)
  2. 1 2 "Evaluating and Eliminating Lead-Based Paint Hazards". US EPA: Lead. United States Environmental Protection Agency. October 13, 2015.{{cite web}}: CS1 maint: url-status (link)
  3. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Environmental Protection Agency (EPA) (August 29, 1996). "Lead; Requirements for Lead-Based Paint Activities in Target Housing and Child-Occupied Facilities" (PDF). Federal Register. 61.
  4. 1 2 "Tips on How to Remove Lead-Based Paint From Buildings". The Balance Small Business.{{cite web}}: CS1 maint: url-status (link)
  5. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 O'Connor, David; Hou, Deyi; Ye, Jing; Zhang, Yunhui; Ok, Yong Sik; Song, Yinan; Coulon, Frederic; Peng, Tianyue; Tian, Li (2018). "Lead-based paint remains a major public health concern: A critical review of global production, trade, use, exposure, health risk, and implications". Environment International. 121 (Pt 1): 85–101. doi: 10.1016/j.envint.2018.08.052 . ISSN   0160-4120. PMID   30179767. S2CID   52160494.
  6. 1 2 "Lead-Based Paint Activities Professionals". US EPA: Lead. United States Environmental Protection Agency. October 25, 2015.{{cite web}}: CS1 maint: url-status (link)
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.