Lee III Hall of Clemson University

Last updated
Lee III Hall Lee III Hall, Clemson University, October 22.jpg
Lee III Hall

The Lee III Hall located on the Clemson University Campus in Clemson, SC, generates enough energy to offset its energy use. Its sustainability puts it on the list of one of the most-energy-efficient academic buildings in the United States. The Lee III Hall is considered to be zero net-energy ready. Its design and materials make it eco-friendly and allow it to eliminate its energy consumption with its own renewable energy. [1] Also, the building contains a 30,000 square-foot garden-roof, the largest university garden-roof in the southeastern United States. Lee III was completed and added to the Lee complex in 2012. It is estimated to have a 55,000-square-foot area [2] and a total cost of 31.6 million dollars. [3] Lee III serves for the College of Architecture, Arts and Humanities. [1]

Contents

Address

College of Architecture, Arts and Humanities 110 Daniel Dr. Clemson, SC 29631, United States of America [1]

History

The Lee Hall is named after one of the first Clemson graduates, Rudolph E. Lee. He graduated from Clemson in 1896. [1] The original Lee Hall was constructed on the Clemson Campus in 1957-58. The building was designated as the Structural Science Building for the Science Department. The original design of Lee was created by Harlan McClure, an architect and the former dean of Clemson University. [4] The building was later used for the College of Architecture; the classrooms were used as studio spaces. As the university expended and an increasing number of students enrolled in the College of Architecture, the need for space expansion appeared. The resolution for this problem was the addition of the Lee III Hall. The Lee III expansion was designed by Thomas Phifer and McMillan Pazdan Smith Architecture. [1] Even though the addition of Lee III transformed the 55-year-old building, its features were inspired by the original structure and the addition of the 1970s. Lee III was completed in 2012 and a formal completion ceremony was held in the Lee Hall Courtyard on Friday, April 13, 2012 at 11:30 a.m. Lee III houses the School of Architecture, Planning, Development, Preservation and Landscape Architecture, Department of Art, Department of Construction Science and Management, and the Ph.D. in Planning, Design and the Built Environment. [1] Lee III was named the first modern building in South Carolina on the National Register of Historic Buildings. Also, Lee III was submitted for LEED Certification with the United States Green Building Council. [2]

Planning and Construction

The construction was directed by the Holder Construction Company of Atlanta with the partnership of architects Thomas Phifer, McMillan Pazdan Smith Architecture of Greenville and Partners of New York City. [4] The first plans included the idea of a separate addition of the south existing Lee Hall. Thomas Phifer’s main goal was to create a “Light, opened and well ordered structure.” The goal was also to create an eco-friendly space. Therefore, the decision was to utilize recycled materials. To serve its purpose, the architects planned on increasing the overall Lee complex by 50%. The students and faculty collaborated on proposing the designs for studio work stations. Architect Harvey Grantt also contributed to the project by making recommendations towards the layout of the existing structure. [3]

About the Architects

The architects working on the Lee III project included Thomas Phifer, Partners of New York and McMillan Pazdan Smith Architecture of Greenville. [5] The main architect, Thomas Phifer a native of Columbia, SC is a former graduate of Clemson University with the degree in architecture. Phifer created his own architecture firm called Thomas Phifer and Partners. Currently, Thomas Phifer's offices are located in New York City. For several years, Phifer worked for an architect Richard Meier. As a result, Phifer’s architectural style is influenced by Meier’s work. [3] He has received American Institute of Architects Honor Awards and American Architecture Awards. [6]

Design

Close-up of the frontal design of the Lee III Hall. Lee III Hall, Close-up, Front View.jpg
Close-up of the frontal design of the Lee III Hall.

The design of Lee III concentrated on its sustainability. Lee is able to offset its energy use with the energy it generates. This zero-net energy consumption is based on its exterior and interior design as well as its cooling system. [2] Lee III’s heating and cooling system consists of 42 geothermal wells installed below its floors at a depth of 440 feet below the ground. The geothermal wells create its heating a cooling mechanical system. [5] The openness of the building allows for natural ventilation. A system of mechanical windows controls the temperature of the building. When the threshold level is reached by the humidity and temperature, the windows close and stabilize the temperature. The ideal temperature of the building is 59 degrees Fahrenheit. Lee III also contains monitors to stabilize its room temperature. Its Sedum/Garden Roof, the largest in the southeastern US, cools the building by maintaining and controlling the runoff water. The natural light in Lee III comes from the placements and mechanics of the interior and exterior skylights. A total of 53 skylights are installed in the building. [7] This allowed for 98% of its space to have exterior views in different directions. The materials for the building were made close to the construction site, 500 miles or less from the building. All materials used were according to VOC’s standards. The wood used was certified and harvested by the Forestry Stewardship Council. [1]

Sustainability

The Lee III extension is a zero-energy building. [2] Lee III generates as much renewable energy as it uses making it one of the most sustainable buildings in the United States. Its sustainability level is achieved by several factors. On the roof of Lee III, photo-voltaic panels are installed which generate energy from the sun. The design of the large window walls which allow for natural light to enter the building minimizes the need for light during the day. [1] The 42 geothermal walls use the natural temperature of the earth to maintain the temperature inside the building. [2] The building creates natural ventilation through its mechanical windows. The windows are located at the bottom of the building’s base and 30 feet above the floor at the ceiling. Natural ventilation stabilizes the temperature inside and provides for fresh air without using energy. [3] The closed-loop geothermal heat pump offsets the heating and cooling bundle. [8]

The following photographs showcase the exterior of the Lee III Hall.

The total view of the Lee III addition. Total View of the Lee III Hall, Clemson University.jpg
The total view of the Lee III addition.
Glass windows of Lee III, Clemson University Glass windows of Lee III, Clemson University.jpg
Glass windows of Lee III, Clemson University
Angle View, Lee III Hall Clemson Angle View, Lee III Hall Clemson.jpg
Angle View, Lee III Hall Clemson
Left View, Lee III Hall, Clemson University, October 22 Left View, Lee III Hall, Clemson University, October 22.jpg
Left View, Lee III Hall, Clemson University, October 22
Doors and Skylights, Lee III, Clemson University Doors and Skylights, Lee III, Clemson University.jpg
Doors and Skylights, Lee III, Clemson University

Related Research Articles

<span class="mw-page-title-main">Heating, ventilation, and air conditioning</span> Technology of indoor and vehicular environmental comfort

Heating, ventilation, and air conditioning (HVAC) is the use of various technologies to control the temperature, humidity, and purity of the air in an enclosed space. Its goal is to provide thermal comfort and acceptable indoor air quality. HVAC system design is a subdiscipline of mechanical engineering, based on the principles of thermodynamics, fluid mechanics, and heat transfer. "Refrigeration" is sometimes added to the field's abbreviation as HVAC&R or HVACR, or "ventilation" is dropped, as in HACR.

A Trombe wall is a massive equator-facing wall that is painted a dark color in order to absorb thermal energy from incident sunlight and covered with a glass on the outside with an insulating air-gap between the wall and the glaze. A Trombe wall is a passive solar building design strategy that adopts the concept of indirect-gain, where sunlight first strikes a solar energy collection surface in contact with a thermal mass of air. The sunlight absorbed by the mass is converted to thermal energy (heat) and then transferred into the living space.

<span class="mw-page-title-main">Passive solar building design</span> Architectural engineering that uses the Suns heat without electric or mechanical systems

In passive solar building design, windows, walls, and floors are made to collect, store, reflect, and distribute solar energy, in the form of heat in the winter and reject solar heat in the summer. This is called passive solar design because, unlike active solar heating systems, it does not involve the use of mechanical and electrical devices.

<span class="mw-page-title-main">Passive house</span> Type of house

Passive house is a voluntary standard for energy efficiency in a building, which reduces the building's ecological footprint. It results in ultra-low energy buildings that require little energy for space heating or cooling. A similar standard, MINERGIE-P, is used in Switzerland. The standard is not confined to residential properties; several office buildings, schools, kindergartens and a supermarket have also been constructed to the standard. The design is not an attachment or supplement to architectural design, but a design process that integrates with architectural design. Although it is generally applied to new buildings, it has also been used for refurbishments.

<span class="mw-page-title-main">Windcatcher</span> Architectural element for creating a draft

A windcatcher, wind tower, or wind scoop is a traditional architectural element, originated in Iran (Persia), used to create cross ventilation and passive cooling in buildings. Windcatchers come in various designs, depending on whether local prevailing winds are unidirectional, bidirectional, or multidirectional, on how they change with altitude, on the daily temperature cycle, on humidity, and on how much dust needs to be removed. Despite the name, windcatchers can also function without wind.

<span class="mw-page-title-main">Sustainable architecture</span> Architecture designed to minimize environmental impact

Sustainable architecture is architecture that seeks to minimize the negative environmental impact of buildings through improved efficiency and moderation in the use of materials, energy, development space and the ecosystem at large. Sustainable architecture uses a conscious approach to energy and ecological conservation in the design of the built environment.

<span class="mw-page-title-main">Zero-energy building</span> Energy efficiency standard for buildings

A Zero-Energy Building (ZEB), also known as a Net Zero-Energy (NZE) building, is a building with net zero energy consumption, meaning the total amount of energy used by the building on an annual basis is equal to the amount of renewable energy created on the site or in other definitions by renewable energy sources offsite, using technology such as heat pumps, high efficiency windows and insulation, and solar panels.

Renewable heat is an application of renewable energy referring to the generation of heat from renewable sources; for example, feeding radiators with water warmed by focused solar radiation rather than by a fossil fuel boiler. Renewable heat technologies include renewable biofuels, solar heating, geothermal heating, heat pumps and heat exchangers. Insulation is almost always an important factor in how renewable heating is implemented.

<span class="mw-page-title-main">Passive cooling</span> Building design that reduces inside temperatures without air conditioning

Passive cooling is a building design approach that focuses on heat gain control and heat dissipation in a building in order to improve the indoor thermal comfort with low or no energy consumption. This approach works either by preventing heat from entering the interior or by removing heat from the building.

<span class="mw-page-title-main">Passive ventilation</span> Ventilation without use of mechanical systems

Passive ventilation is the process of supplying air to and removing air from an indoor space without using mechanical systems. It refers to the flow of external air to an indoor space as a result of pressure differences arising from natural forces.

Pearl River Tower is a 71-story, 309.6 m (1,016 ft), clean technology neofuturistic skyscraper at the junction of Jinsui Road/Zhujiang Avenue West, Tianhe District, Guangzhou, China. The tower's architecture and engineering were performed by Skidmore, Owings & Merrill with Adrian D. Smith and Gordon Gill as architects. Ground broke on the tower on 8 September 2006 and construction was completed in March 2011. It is intended for office use and is partially occupied by the China National Tobacco Corporation.

A double envelope house is a passive solar house design which collects solar energy in a solarium and passively allows the warm air to circulate around the house between two sets of walls, a double building envelope. This design is from 1975 by Lee Porter Butler in the United States.

<span class="mw-page-title-main">Solar air heat</span> Solar thermal technology

Solar air heating is a solar thermal technology in which the energy from the sun, insolation, is captured by an absorbing medium and used to heat air. Solar air heating is a renewable energy heating technology used to heat or condition air for buildings or process heat applications. It is typically the most cost-effective out of all the solar technologies, especially in commercial and industrial applications, and it addresses the largest usage of building energy in heating climates, which is space heating and industrial process heating.

<span class="mw-page-title-main">Tower at PNC Plaza</span> High-rise building in Pittsburgh, Pennsylvania

The Tower at PNC Plaza is a 33-story skyscraper in Pittsburgh, Pennsylvania. It is the corporate headquarters of the PNC Financial Services Group and has approximately 800,000 square feet (74,000 m2), standing 33 stories tall. Nearby buildings totaling 37,000 square feet (3,400 m2), were purchased by PNC and deconstructed to make space for the Tower at PNC Plaza. It is located at the intersection of Fifth Avenue and Wood Street, where PNC and its predecessors have been based since 1858.

Sustainable refurbishment describes working on existing buildings to improve their environmental performance using sustainable methods and materials. A refurbishment or retrofit is defined as: "any work to a building over and above maintenance to change its capacity, function or performance' in other words, any intervention to adjust, reuse, or upgrade a building to suit new conditions or requirements". Refurbishment can be done to a part of a building, an entire building, or a campus. Sustainable refurbishment takes this a step further to modify the existing building to perform better in terms of its environmental impact and its occupants' environment.

The Horizontal Skyscraper, designed by Steven Holl Architects and completed in 2009, is a mixed-use building on the outskirts of Shenzhen, China. It is in Dameisha, Yantian District. The complex includes offices for the Vanke Co., a conference center, restaurant, an auditorium, a hotel, apartments and a large public park.

<span class="mw-page-title-main">Swanston Academic Building</span> Education in Victoria, Australia

The Swanston Academic building is an RMIT building designed by the architecture firm Lyons and is located on Swanston Street in Melbourne across from Peter Corrigan designed building 8 and ARM's Storey Hall. Construction began in September 2010 and was completed in September 2012. The budget for the SAB was $200,000,000. The new building contains 35,000 square metres (380,000 sq ft) of floor space, is 11 storeys high and provides 6 large lecture theatres for students. The colourful building is intended to reflect the cities surroundings in the façade. “The idea is to wear the ‘cloak’ of the city”.

Indira Paryavaran Bhawan is India's first on-site net-zero building located in New Delhi, India. The building houses the Ministry of Environment, Forest and Climate Change (MoEFCC) accommodating three ministers and their offices along with about 600 officials. The building, designed and constructed by the Central Public Works Department (CPWD), was completed in 2013 at a cost of INR 209 Crore.

<span class="mw-page-title-main">David and Lucile Packard Foundation Headquarters</span> Office in California, United States

The David and Lucile Packard Foundation Headquarters is the corporate headquarters of the David and Lucile Packard Foundation, located in Los Altos, California. The Packard Foundation was created in 1964 by David Packard and his wife Lucile Salter Packard, one of the top 100 grant-making foundations in the United States, with the goals of improving the lives of children, enabling the creative pursuit of science, advancing reproductive health, and conserving and restoring the Earth’s natural systems. The David and Lucile Packard Foundation Headquarters is designed by EHDD to be the largest net zero energy building in California, and it has successfully reduced the energy use by 65% over conventional buildings.

<span class="mw-page-title-main">Cross ventilation</span> Movement of air through a building

Cross ventilation is a natural phenomenon where wind, fresh air or a breeze enters upon an opening, such as a window, and flows directly through the space and exits through an opening on the opposite side of the building. This produces a cool stream of air and as well as a current across the room from the exposed area to the sheltered area. Other terms used for the effect include, cross-breeze, cross-draft, wind effect ventilation and cross-flow ventilation.

References

  1. 1 2 3 4 5 6 7 8 Adams, LeRoy (April 13, 2012). "Lee Hall Restoration, Renovation and Expansion" (PDF). Clemson College of Architecture Arts and Humanities. Retrieved 18 October 2012.
  2. 1 2 3 4 5 Judy, Scott (May 9, 2011). "Getting Schooled in The Art of Net Zero". ENRSoutheast. Retrieved 18 October 2012.
  3. 1 2 3 4 Bard Brutzman, Anna (February 25, 2012). "Teaching tool: Architecture school's Lee Hall expands in Clemson". IndependentMail. Retrieved September 28, 2012.
  4. 1 2 Marrow, Mary Kate (April 13, 2012). "Green innovation behind Lee III". The Tiger News. Archived from the original on 4 February 2013. Retrieved 18 October 2012.
  5. 1 2 Behre, Robert (August 20, 2012). "BEHRE COLUMN: Clemson building paves way". The Post and Courier. Retrieved 18 October 2012.
  6. Cilento, Karen. "AD Interviews: Thomas Phifer". ArchDaily. Archived from the original on 2 July 2012. Retrieved 23 October 2012.
  7. Info Writer. "Clemson University dedicates upgraded Rudolph Lee Hall". World Construction Today. Retrieved 16 April 2012.
  8. "Clemson Lee Hall". McMillian Pazdan Smith Architecture. Retrieved 18 October 2012.