Leicaflex

Last updated
The Leicaflex was sold by Leitz from 1964 to 1976. The company changed its name to Leica in 1986. Leitz Camera.svg
The Leicaflex was sold by Leitz from 1964 to 1976. The company changed its name to Leica in 1986.

The Leicaflex series of high-end single-lens reflex 35 mm format film cameras were introduced by Leitz Camera in 1964. The first camera body was paired with the new R bayonet series of lenses. Three model of the cameras were sold by Leitz; the Leicaflex Standard, the Leicaflex SL and the Leicaflex SL2.

Contents

Late into the market with high prices and limited range of lenses and accessories, Leicaflex sales were below expectations and production ended in 1976. However, the production of the R mount lenses continued and were paired with the new Leica R3 that was developed in cooperation with Minolta, together with the Minolta XE bodies. [1]

Leicaflex

Leicaflex
Leicaflex Standard Mark I (13806276244).jpg
Overview
Maker Leitz
Type35 mm SLR camera
Released1964
Production1964-1968
Lens
Lens mount R bayonet
Sensor/medium
Film advanceManual
Focusing
FocusManual
General
Dimensions 148 × 97 × 50 mm
Weight 770 g
Made in Germany
Chronology
SuccessorLeicaflex SL

In 1964 Leitz introduced its first single-lens reflex camera, the Leicaflex also known as the Leicaflex Standard. This was a response, albeit reluctantly, to the rising popularity of the SLR format. Ludwig Leitz, head of the company was urged to begin development by photographer Walther Benser back in 1955. This was due to Benser's opinion that the SLR camera system would soon rise in popularity. [2]

Beginning with the introduction of the Asahi Pentax in 1957, the Nikon F and the Canonflex in 1959, all from Japan. However, Leitz did not have the expertise the Japanese had in this format. To date its leading product; the Leica M mount series was a rangefinder camera, a format long abandoned by its competitors in the Far East. Finally, development of the Leicaflex began in 1958 and the first prototype was shown in 1963. A year later the camera was released. [3]

The Leicaflex featured a shutter speed range of 1 second to 1/2000 a second, a CdS exposure light meter (but not through-the-lens metering) and a new range of lenses with quick change bayonet (the R bayonet). The design was minimal, and the camera body was based on the Leica M. The viewfinder featured display indicators for the shutter speed setting and the light meter reading. Correct exposure is obtained by matching the needles displayed in the viewfinder. The shutter speed dial, film crank, film rewind and film count are all located on the top plate.

Due to its complicated mechanical construction the camera was extremely costly to manufacture. Its high price and lack of through-the-lens metering led to disappointing sales and only 37,500 units were made (mostly in silver chrome and about 1,000 units in black paint). Production of this camera ended in 1968. [4] [3]

Leicaflex SL

Leicaflex SL
Leicaflex SL (2).jpg
Overview
Maker Leitz
Type35 mm SLR camera
Released1968
Production1968-1974
Lens
Lens mount R bayonet
Sensor/medium
Film advanceManual
Focusing
FocusManual
General
Dimensions 148 × 97 × 50 mm
Weight 770 g
Made in Germany
Chronology
PredecessorLeicaflex Standard
SuccessorLeicaflex SL2

In 1968 the Leicaflex SL was introduced, with the SL standing for selective light. The Leicaflex SL featured TTL metering with a 5% selective measurement of the subject field, corresponding with the diameter of the circle of the micro prism. This meant that the Leicaflex SL was the first SLR camera with selective TTL metering. [5] This was considered theoretically superior to other systems that relied on the average reading of the whole prism.

This model also featured a depth-of-field preview button. There were a few cosmetic revisions including the change of the colour of the shutter dial from silver to black and the relocation of the batteries to the camera's base plate. Models were produced in silver chrome and black paint. In 1972 a special edition was produced to commemorate the 1972 Summer Olympics, held in Munich, West Germany. The Olympic rings and the number 72 were engraved on the top plate, only 1,200 of these were produced with special serial numbers. [6] [7]

From 1972 to 1974 a small number of Leicaflex SL MOT were produced in black, and a few in silver chrome, with 'MOT' engraved on the top plate. These models have an internal drive shaft, which allowed an external motor to be attached for fast film winding. Furthermore, all contacts and controls were mounted externally on its base plate, thus allowing for quick mounting of the motor without the need to remove the base plate. The SL MOT, however lacked the self-timer and the meter switch in the advance lever of the ordinary models. [6]

The Leicaflex SL (including the SL MOT) sold over 70,000 units. Production of this camera ended in 1974. [6] [7]

Leicaflex SL2

Leicaflex SL2
Leitz Leicaflex SL2 Black (1975) Front capped.jpg
Overview
Maker Leitz
Type35 mm SLR camera
Released1974
Production1974-1976
Lens
Lens mount R bayonet
Sensor/medium
Film advanceManual
Focusing
FocusManual
General
Dimensions 148 × 97 × 50 mm
Weight 770 g
Made in Germany
Chronology
PredecessorLeicaflex SL
SuccessorLeica R3

The Leicaflex SL2 was introduced in 1974. The new model contained several new features, but also some cost-cutting measures. Improvements included an increase in meter sensitivity (3 stops more than the previous model). The aperture indicator was added to the viewfinder, which could be illuminated by pressing a separate button (with added extra battery compartment). A redesigned mirror in the body allowed the camera to accept new wide-angle lenses (such as the 16 mm and 19 mm focal length).

Cosmetically the camera shape was squarer and was less curved than its predecessor. Models were produced in silver chrome and in black chrome. A switch from black paint to black chrome plating was chosen as the former process was more expensive due to the fact that the layer of paint was thicker than the chrome plating as a result different dimensions had to be made for the different parts in order for the final result to be of the same size. More non-metal components were also added to reduce the cost of manufacturing. [8] [7]

In 1975 a special edition model was produced for the 50th anniversary of the production of the first Leica. These models were engraved with '50 JAHRE' surrounded by oak leaves, only 1,750 were made. [8]

A Leicaflex SL2 MOT was also introduced, all in black paint. Two models of the motors were produced to go with the camera. The earlier motor was for a continuous run for film rewinding, while the later model had a control marked 'E' ( Einzel or 'single') for using the motor as a power winder for single shots. [8]

Production of this camera ended in 1976, which meant that the camera was on the catalogue for only two years. [9] During this period over 26,000 units were sold (25,000 SL2 and 10,000 SL2 MOT). [7] By 1976 due to limited success, high cost of production and other financial constraints, Leitz discontinued the Leicaflex series. In fact, Leitz was losing money on each Leicaflex SL2 sold, due to the high-cost manufacture. The sales of the R bayonet lenses were not able to compensate for this loss and the entire product line became unsustainable for the company. [10]

Furthermore in 1973 the Leitz family transferred the ownership and management of the company over to Wild Heerbrugg, which had little interest in the photographic division of the company. However, a fortunate partnership back in 1971 with Minolta was able to save the R bayonet lens system. In 1976 the Leica R3 was introduced (designed and produced in conjunction with Minolta). The Leica R3 started a new series of camera, which on the whole were a lot cheaper and more electronically innovative than the Leicaflex series, whilst maintaining the R bayonet lenses. Leica did not return to the SLR market until 1997, with the introduction of the digital Leica S-System. [11]

Related Research Articles

<span class="mw-page-title-main">Single-lens reflex camera</span> Camera that typically uses a mirror and prism system

A single-lens reflex camera (SLR) is a camera that typically uses a mirror and prism system that permits the photographer to view through the lens and see exactly what will be captured. With twin lens reflex and rangefinder cameras, the viewed image could be significantly different from the final image. When the shutter button is pressed on most SLRs, the mirror flips out of the light path, allowing light to pass through to the light receptor and the image to be captured.

<span class="mw-page-title-main">Rangefinder camera</span> Camera fitted with a rangefinder

A rangefinder camera is a camera fitted with a rangefinder, typically a split-image rangefinder: a range-finding focusing mechanism allowing the photographer to measure the subject distance and take photographs that are in sharp focus. Most varieties of rangefinder show two images of the same subject, one of which moves when a calibrated wheel is turned; when the two images coincide and fuse into one, the distance can be read off the wheel. Older, non-coupled rangefinder cameras display the focusing distance and require the photographer to transfer the value to the lens focus ring; cameras without built-in rangefinders could have an external rangefinder fitted into the accessory shoe. Earlier cameras of this type had separate viewfinder and rangefinder windows; later the rangefinder was incorporated into the viewfinder. More modern designs have rangefinders coupled to the focusing mechanism so that the lens is focused correctly when the rangefinder images fuse; compare with the focusing screen in non-autofocus SLRs.

<span class="mw-page-title-main">Leica Camera</span> German optics company

Leica Camera AG is a German company that manufactures cameras, optical lenses, photographic lenses, binoculars, rifle scopes and microscopes. The company was founded by Ernst Leitz in 1869, in Wetzlar, Germany.

<span class="mw-page-title-main">Minolta</span> Former Japanese imaging corporation

Minolta Co., Ltd. was a Japanese manufacturer of cameras, camera accessories, photocopiers, fax machines, and laser printers. Minolta Co., Ltd., which is also known simply as Minolta, was founded in Osaka, Japan, in 1928 as Nichi-Doku Shashinki Shōten. It made the first integrated autofocus 35 mm SLR camera system. In 1931, the company adopted its final name, an acronym for "Mechanism, Instruments, Optics, and Lenses by Tashima".

<span class="mw-page-title-main">Contax</span> Japanese camera brand

Contax began as a camera model in the Zeiss Ikon line in 1932, and later became a brand name. The early cameras were among the finest in the world, typically featuring high quality Zeiss interchangeable lenses. The final products under the Contax name were a line of 35 mm, medium format, and digital cameras engineered and manufactured by Japanese multinational Kyocera, and featuring modern Zeiss optics. In 2005, Kyocera announced that it would no longer produce Contax cameras. The rights to the brand are currently part of Carl Zeiss AG, but no Contax cameras are currently in production, and the brand is considered dormant.

<span class="mw-page-title-main">Leica M3</span>

The Leica M3 is a 35 mm rangefinder camera by Ernst Leitz GmbH, introduced in 1954. It was a new starting point for Leitz, which until then had only produced screw-mount Leica cameras that were incremental improvements to its original Leica (Ur-Leica). The M3 introduced several features to the Leica, among them the combination of viewfinder and rangefinder in one bright window, like on the Contax II, a bayonet lens mount, and rapid film advance lever. It was the most successful model of the M series, with over 220,000 units sold by the time production of the M3 model ended in 1966.

<span class="mw-page-title-main">Canon AE-1</span> 35 mm film single-lens reflex camera

The Canon AE-1 is a 35 mm single-lens reflex (SLR) film camera for use with interchangeable lenses. It was manufactured by Canon Camera K. K. in Japan from April 1976 to 1984. It uses an electronically controlled, electromagnet horizontal cloth focal plane shutter, with a speed range of 2 to 1/1000 second plus Bulb and flash X-sync of 1/60 second. The camera body is 87 mm tall, 141 mm wide, and 48 mm deep; it weighs 590 g. Most are black with chrome trim, but some are all black.

<span class="mw-page-title-main">Rolleiflex SL35</span> SLR cameras from Rolleiflex

The Rolleiflex SL35 is a range of SLR cameras from the German camera maker, Rollei. This range of camera uses 35mm film. The camera bodies were initially made in Germany, and later, Singapore. Rolleiflex SL35 uses QBM mount, with a focal flange distance of 44.5 mm.

<span class="mw-page-title-main">Minolta X-700</span>

The Minolta X-700 is a 35 mm single-lens reflex film camera introduced by Minolta in 1981. It was the top model of their final manual-focus SLR series before the introduction of the auto-focus Minolta Maxxum 7000.

<span class="mw-page-title-main">Leica R8-R9</span>

The Leica R8 & R9 are manual focus 35 mm single-lens reflex cameras produced by the German firm Leica as the final models of their R series. Development of the R8 began in 1990: the camera was introduced at the 1996 photokina trade show, and was succeeded by the similar Leica R9 in 2002.

<span class="mw-page-title-main">Leica R bayonet</span>

The Leica R bayonet mount is a camera lens mount system introduced by Leitz in 1964. The R mount is the standard method of connecting a lens to the Leica R series of 35 mm single-lens reflex cameras. The mount is descended from those used for the Leicaflex, Leicaflex SL and Leicaflex SL2 SLR cameras, but differs in the cams used to communicate lens aperture information to the camera. 3 cam lenses are compatible with all of the Leica SLR cameras, while R-only lenses have a slightly different mount shape that will not fit on the earlier cameras.

<span class="mw-page-title-main">Leica CL</span>

The Leica CL is a 35mm compact rangefinder camera with interchangeable lenses in the Leica M-mount. It was developed in collaboration with Minolta who manufactured it. It first appeared in April 1973 and was released in the Japanese market in November 1973 as the Leitz Minolta CL. Both the Leica CL and Leitz Minolta CL were manufactured in a new Minolta factory in Osaka. In 2017, Leica announced a new digital mirrorless camera, again named Leica CL.

<span class="mw-page-title-main">Leica R3</span>

The Leica R3 was a 35mm SLR camera by Leica and the first model of their R series.

<span class="mw-page-title-main">Konica Hexar RF</span>

The Konica Hexar RF is a 35 mm rangefinder camera which was sold by Konica. It was introduced to the market on 13 October 1999. and subsequently discontinued some time before the end of 2003. The camera used the "Bayonet Konica KM-mount", a copy of the Leica M-mount, thus sharing interchangeable lenses with those designed for Leica cameras and others compatible with them. The Hexar RF has a combined rangefinder/viewfinder modeled on that of Leica cameras, a similar body shape and size - and so is similar to Leica M-mount cameras in many aspects of operation.

<span class="mw-page-title-main">Konica Hexar</span>

The Konica Hexar is a 35 mm fixed-lens, fixed focal length autofocus camera which was produced through the 1990s. It was introduced to the market in 1993. While styled like a rangefinder camera, and intended for a similar style of photography, in specification it is more like a larger "point and shoot" camera.

<span class="mw-page-title-main">Minolta CLE</span> 35 mm rangefinder camera

The Minolta CLE is a TTL-metering automatic exposure aperture-priority 35 mm rangefinder camera using Leica M lenses, introduced by Minolta in 1980.

<span class="mw-page-title-main">Minolta SR-mount</span>

The Minolta SR-mount was the bayonet mounting system used in all 35 mm SLR cameras made by Minolta with interchangeable manual focusing lenses. Several iterations of the mounting were produced over the decades, and as a result, the mount itself was sometimes referred to by the name of the corresponding lens generation instead.

<span class="mw-page-title-main">Leica M5</span>

The Leica M5 is a 35 mm camera by Leica Camera AG, introduced in 1971. It was the first Leica rangefinder camera to feature through-the-lens (TTL) metering and the last to be made entirely in Wetzlar by hand using the traditional "adjust and fit" method.

<span class="mw-page-title-main">Leica Standard</span>

The Leica Standard, Model E was the fourth version of the original 35 mm Leica camera to be launched from Ernst Leitz in Wetzlar, Germany. The concept was conceived by their employee Oskar Barnack in 1913. Production of the camera began in 1925 but it was not until the end of the decade that it was perfected and full-scale production was established.

Leica R4, R5, R6, R7 were 35 mm SLR cameras manufactured by Leica between 1980 and 1997 and belonged to the manual focusing R-System, which was offered from 1965 to 2009.

References

Citations
  1. photoscala.de, July 2018, »R« – in the Shadow of the »M«, retrieved at 1 November 2020 (German).
  2. Eastland 2006 , p. 8
  3. 1 2 Puts 2014 , p. 87
  4. Laney 2004 , p. 72
  5. Eastland 2006 , p. 21
  6. 1 2 3 Laney 2004 , p. 73
  7. 1 2 3 4 Puts 2014 , p. 87
  8. 1 2 3 Laney 2004 , p. 74
  9. "Leicaflex SL2 review". www.apotelyt.com. Retrieved 2021-04-20.
  10. "The Leicaflex SL2 Could be the Best Leica SLR Ever Made". Casual Photophile. 2017-08-31. Retrieved 2021-04-20.
  11. Puts 2014 , p. 90
Bibliography