Lib Technologies

Last updated

Lib Technologies is an American snowboard manufacturer known for innovative snowboard designs and construction. [1] Often referred to as Lib Tech, the company falls under the umbrella of parent company Mervin Manufacturing. Surf company Quiksilver bought Mervin in 1997. [2] As of 2013, Mervin was purchased by Altamont Capital Partners. [3]

Contents

Lib Tech produces snowboards, surfboards, snow skates and wake surf boards all from their manufacturing base in Sequim, Washington [4] in the Pacific Northwest region of the United States.

History

Mike Olson built his first snowboard in 1977, and by 1984 had dropped out of Pacific Lutheran University, to begin making snowboards full-time. [5] Mervin Manufacturing's headquarters were set up in an "old racehorse barn," where Olson worked for two years, paying rent by mowing the lawn and cleaning the gutters for the barn's owner. Olson was quickly joined in his efforts by Pete Saari, and the two began churning out small orders for members of the nascent snowboard community. Mike Olson’s first snowboards were called Slope Tools. In the early 80’s the GNU snowboard brand was started and was forced out of business by a controversial distribution deal with Wind line out of Seattle. Mike Olson and Pete Saari owned the factory and decided to start the Lib Technologies snowboard brand. Gnu snowboards was then reacquired back from the bank a couple years later. [6]

Technology

Magne-Traction

Gravitating away from the long, smoothly curving sidewall and edge of a traditional snowboard, Lib Tech's Magne-Traction technology employs a "serrated" edge consisting of seven bumps in the side wall. [7] According to Lib Tech's co-founder and VP of Marketing, Pete Saari:

"Magne-traction is 7 bumps or teeth along the length of your sidecut and edge each specifically sized and located to improve edge hold and focus control and power where you need it. The 3 largest most aggressive teeth are located between your feet adding control to the un-pressurable "dead zone" at and between your feet where your balance is centered. Smaller less aggressive teeth are located between your front foot and the contact area adding edge hold for turn initiation and control but keeping the tips and tails loose for catch-free freestyle." [8]

Since its debut, Magne-Traction has been generally well received by both reviewers and the general snowboard community, winning more than 15 Transworld Good Wood Awards and over 20 Future magazine awards. [7]

Banana Technology

The introduction of Lib Tech's Banana Technology marked yet another departure from orthodox snowboard design. Traditionally, snowboards are built with camber—the gentle arch formed in between the board's contact points when placed on a flat surface. [9] Camber geometry was first introduced for skis, which each have only one central area of pressure input (i.e., under the skier's boot). Snowboards, however, have two areas of pressure input (i.e., one under the front boot, and one under the back boot), leaving the rider unable to efficiently depress the center of the snowboard, an effect which Lib Tech's Pete Saari calls the "dead zone." [8]

Banana Technology does away with this "dead zone" by reversing the snowboard's camber between the rider's feet; rather than arcing upward, like traditionally cambered boards, those with Banana Technology arc downwards, allowing the board to rest on its center when placed on a flat surface. As Saari puts it, "Banana Technology focuses edge pressure between your feet, bringing the dead zone to life. It adds catch free tips and tails for jibs, rails, and forgiving landings. It adds pre-bent rocker between your feet for edge hold and carving, and it adds tip and tail float in powder." [8]

Banana Technology has been extremely well received by the snowboard community; in 2008, Banana Technology's inaugural year, Lib Tech experienced an 81% spike in sales. [5] Boards equipped with Banana Technology have garnered Lib Tech a slew of awards:

Banana Technology (BTX), like Magne-Traction before it, begins with the premise that a snowboard is not a ski. Banana Technology replaces camber with rocker "Banana" between your feet.

Environmental sustainability

Lib Tech is known throughout the snowboard industry for their longtime commitment to environmental sustainability. [13] Mike Olson took the first steps towards sustainability early in the history of Lib Technologies; he replaced toxic ABS plastic with recyclable polyethylene in 1986, and introduced sustainable polymer top sheets and bamboo cores in 1995. [13]

Currently, Lib Tech even has its own environmental task force, dubbed the "environMENTAL division," which oversees the company's sustainability measures. [14] Not only does Lib Tech incorporate environmentally friendly materials into their snowboards (such as water-based graphics, non-petroleum-based bio-plastic top sheets, Volatile organic compound resin, renewable wood cores, and basalt fiber rather than fiberglass), but the company has also designed their factory with the environment (and the health of their employees) in mind. [5] [13] [14] [15] The factory's heating system runs on canola-based bio-diesel, which Lib-Tech makes available to employees and local farmers through a bio-diesel co-op program. [14] Wood sawdust is recycled as a soil additive, scrap wood is repackaged as kindling, and scrap plastics are reground and reused. [14] Water-cleansed grinding systems reduce airborne particulate levels, and the factory's air supply is constantly fresh due to a 2700% air-replacement ventilation system. [14]

Riders

The following snowboarders are currently sponsored by Lib Tech: [16]


See also

Related Research Articles

<span class="mw-page-title-main">Snowboard</span> Winter sport equipment

Snowboards are boards where the user places both feet, usually secured, to the same board. The board itself is wider than most skis, with the ability to glide on snow. Snowboards widths are between 6 and 12 inches or 15 to 30 centimeters. Snowboards are differentiated from monoskis by the stance of the user. In monoskiing, the user stands with feet inline with direction of travel, whereas in snowboarding, users stand with feet transverse to the longitude of the board. Users of such equipment may be referred to as snowboarders. Commercial snowboards generally require extra equipment, such as bindings and special boots which help secure both feet of a snowboarder, who generally ride in an upright position. These types of boards are commonly used by people at ski hills, mountains, backcountry, or resorts for leisure, entertainment, and competitive purposes in the activity called snowboarding.

A ski is a narrow strip of semi-rigid material worn underfoot to glide over snow. Substantially longer than they are wide, and characteristically employed in pairs, skis are attached to ski boots with ski bindings, with either a free, lockable, or partially secured heel. For climbing slopes, ski skins can be attached at the base of the ski.

<span class="mw-page-title-main">Snowboarding</span> Snow sport involving a single board

Snowboarding is a recreational and competitive activity that involves descending a snow-covered surface while standing on a snowboard that is almost always attached to a rider's feet. It features in the Winter Olympic Games and Winter Paralympic Games.

Boardsports are active outdoor sports that are played with some sort of board as the primary equipment. These sports take place on a variety of terrains, from paved flat-ground and snow-covered hills to water and air. Most boardsports are considered action sports or extreme sports, and thus often appeal to youth. Some board sports were marginalized in the past. However, many board sports are gaining mainstream recognition, and with this recognition, they have enjoyed wider broadcast, sponsorship and inclusion in institutional sporting events, including the Olympic Games.

<span class="mw-page-title-main">Half-pipe</span> Structure used in sports

A half-pipe is a structure used in gravity extreme sports such as snowboarding, skateboarding, skiing, freestyle BMX, skating, and scooter riding.

<span class="mw-page-title-main">Longboard (skateboard)</span> Type of sports equipment similar to skateboard

A longboard is a type of skateboard typified by longer decks and wheelbases, larger-diameter and softer (lower-durometer) wheels, and often lower riding height compared to street skateboards, though there is wide variation in the geometry and construction of longboards. Among the earliest types of skateboards, longboards were inspired by surfing, with early longboards drawing from the design of surfboards, resembling and mimicking the motion of riding a surfboard, but adapted to riding on streets in a practice known as sidewalk surfing.

<span class="mw-page-title-main">Mountainboarding</span> Action sport

Mountainboarding, also known as dirtboarding, off-road boarding, and All-Terrain Boarding (ATB), is a well-established, but little-known action sport derived from snowboarding. The sport was initially pioneered by James Stanley during a visit to the Matterhorn in the 1990s, where snow was not available. A mountainboard is made up of components including a deck, bindings, four wheels with pneumatic tires, and two steering mechanisms known as trucks. Mountainboarders, also known as riders, ride specifically designed boardercross tracks, slopestyle parks, grass hills, woodlands, gravel tracks, streets, skateparks, ski resorts, BMX courses, and mountain bike trails. It is this ability to ride such a variety of terrain that makes mountainboarding unique from other board sports.

<span class="mw-page-title-main">Snowskate</span>

A snowskate is a hybrid of a skateboard and a snowboard, intended primarily to allow for skateboard-style tricks on the snow. There are many types depending on the brand or style of snowskate.

<span class="mw-page-title-main">Sole Technology</span> American footwear and apparel company

Sole Technology, Inc., informally known as Sole Tech, is an American footwear and apparel company, specializing in skate shoe design, production and distribution. The company is owned and operated by Pierre-André Senizergues, a former professional freestyle skateboarder. The company's headquarters are in Lake Forest, California, United States.

Etnies is a French-American footwear brand based in Lake Forest, California, United States, and is owned by Sole Technology, Inc. The company sponsors professional skateboarders and BMX riders, LAB more and releases signature shoe models.

<span class="mw-page-title-main">Globe International</span> Australian surf and skateboard footwear and apparel manufacturer

Globe International Ltd. is an Australian footwear, clothing, and skateboard hardware company. It was founded in 1985 by three Australian brothers. Globe International's core business is divided between proprietary brands, licensed brands, and distributed brands. The company's international offices are located in Melbourne, Los Angeles, Newport Beach and San Diego, U.S.; Hossegor, France; and Shenzhen, China. It is listed on the Australian Stock Exchange.

<span class="mw-page-title-main">Splitboard</span>

A splitboard is a snowboard that can be separated into two ski-like parts used with climbing skins to ascend slopes in the same way as alpine touring or telemark skis. The main difference is that a splitboard will have an additional metal edge for extra grip in ski mode. Unlike normal snowboards, it will also have nose and tail clips, split hooks, and touring mounts. Similar to cross country skiing, splitboarding allows free heel movement and with skins attached to the bottom of the skis, provides uphill traction. The two halves can then be connected to form a regular snowboard for descent. Splitboarding culture often focuses on the idea of using your own power to access the backcountry usually on unmaintained trails.

<span class="mw-page-title-main">Travis Rice</span> American professional snowboarder (born 1982)

Travis Rice is an American professional snowboarder. He is #13 on Snowboarder magazine's list of the 20 most influential snowboarders of the last 20 years. The 41-year-old has featured in more than twenty snowboarding films. Rice's biggest claim to fame was when he arrived at Snowboarder magazine's Superpark contest at Mammoth Mountain and launched a 'mammoth' of a backside rodeo across a 117-foot gap jump. He has been considered "the Paul Revere" of the big mountain freestyle movement. In 2013, Rice was named the best contemporary snowboarder in the world by Red Bull; Rice was also hailed as one of the greatest snowboarders of all time by numerous writers and publications.

Alien Workshop (AWS) is an independent American skateboarding company that was founded in 1990 by Chris Carter, Mike Hill, and Neil Blender in Dayton, Ohio. Following periods under the ownership of the Burton snowboard company and original team rider Rob Dyrdek in 2012, the company was acquired by Pacific Vector Holdings in October 2013. Alien Workshop produced skateboard decks, wheels, apparel, and other skateboard accessories prior to its closure in May 2014. In 2015, Alien Workshop was revived with an all-amateur team and distribution through Tum Yeto. They released a series of new skate decks and Bunker Down, the brand's sixth video. As of 2016, Alien Workshop, led by Mike Hill phased out working with Tum-Yeto and moved all operations back to the Mound Laboratories in Miamisburg, Ohio. After a tumultuous ownership history they have returned to operations as an independent company.

<span class="mw-page-title-main">Backcountry snowboarding</span>

Backcountry snowboarding is snowboarding in a sparsely inhabited rural region over ungroomed and unmarked slopes or pistes in the backcountry, frequently amongst trees, usually in pursuit of fresh fallen snow, known as powder. Often, the land and the snow pack are not monitored, patrolled, or maintained. Fixed mechanical means of ascent such as ski lifts are typically not present, but alternative means such as splitboarding, hiking, snowshoeing and helicopters ("heliskiing") are sometimes used to reach the mountain's peak.

A fingerboard is a scaled-down replica of a skateboard that a person "rides" with their fingers, rather than their feet. A fingerboard is typically 100 millimeters (3.9 in) long with width ranging from 26 to 55 mm, with graphics, trucks and plastic or ball-bearing wheels, like a skateboard. A fingerboard can be used to do traditional skateboarding tricks, such as an ollie and kickflip.

<span class="mw-page-title-main">Nemo Design</span>

Nemo Design is a brand design agency and creative workshop based in Portland, Oregon, in the United States. The company was established by Jeff Bartel, a snowboarding photographer Trevor Graves, and by Chris Hotz in 1999. It offers a variety of services, specializing in active lifestyle and culture brands.

Vestal was an independent company that marketed watches predicated on image and style, manufactured in Asia.

<span class="mw-page-title-main">DVS Shoes</span> American footwear and clothing company

DVS Shoes is an American footwear and clothing company that specialises in products for skateboarding, moto, bmx, mtb and snowboarding. The company defines itself as "... driven from the pursuit of building product that embodies the sports the company athletes breathe every day. With roots deeply embedded in skate, the company has the platform to develop truly technological products that bring the riders personalities to life."

<span class="mw-page-title-main">Jones Snowboards</span>

Jones Snowboards is a snowboard, snowboard binding, and snowboarding clothing & accessories manufacturer based near Lake Tahoe. The company was founded by renowned freeride snowboarder Jeremy Jones. The company has received numerous awards for its snowboards. Jones snowboards are manufactured in Dubai.

References

  1. ↑ Stifter, John. "Lib Technologies: Bringing Innovation to the Snow", Powder Magazine. Retrieved on 2009-04-20.
  2. ↑ Quiksilver Inc: Information and Much More from Answers.com
  3. ↑ "Mervin was bought by Altamont Capitol Partners".
  4. ↑ "Contact – Lib Tech". Lib-tech.com. Retrieved 2015-05-04.
  5. 1 2 3 Kinmonth, John. "Mervin Manufacturing Shreds Up Snowboard Design", The Seattle Times , 2008-11-20. Retrieved on 2009-04-20.
  6. ↑ "Mike Olson". Roadtrip Nation. Retrieved 2015-05-04.
  7. 1 2 Archived March 23, 2009, at the Wayback Machine
  8. 1 2 3 "Gone Bananas | Transworld Snowboarding". Snowboarding.transworld.net. 2008-10-29. Retrieved 2015-05-04.
  9. ↑ "Snowboard Parts | Snowboards | Camber, Edge, Nose, Tail, Base". Abc-of-snowboarding.com. Archived from the original on 2003-05-23. Retrieved 2015-05-04.
  10. 1 2 3 4 5 6 Archived March 3, 2009, at the Wayback Machine
  11. 1 2 3 4 5 6 Archived April 7, 2009, at the Wayback Machine
  12. ↑ Archived March 31, 2009, at the Wayback Machine
  13. 1 2 3 Huffman, Jesse. "Board Makers Offer the Green Option", The New York Times . Retrieved on 2009-5-7.
  14. 1 2 3 4 5 Archived March 5, 2009, at the Wayback Machine
  15. ↑ MacCuish, Rikki. "Snowboard Manufacturing Taking a Green Turn" Archived 2009-08-19 at the Wayback Machine , Spin News Magazine. Retrieved on 2009-5-7.
  16. ↑ Archived March 23, 2009, at the Wayback Machine
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.