Liberator (gun)

Last updated

Liberator .380
Type Single-shot pistol
Place of originUnited States
Production history
Designer Defense Distributed
DesignedApril 2013[ citation needed ]
Produced2013–present [1]
Specifications
Length216 mm (8.5 in)
Barrel  length64 mm (2.5 in)
Height160 mm (6.3 in)
Cartridge .380 ACP
Action Single-shot

The Liberator is a 3D-printable single-shot handgun, the first such printable firearm design made widely available online. [2] [3] [4] The open source firm Defense Distributed designed the gun and released the plans on the Internet on May 6, 2013. The plans were downloaded over 100,000 times in the two days before the United States Department of State demanded that Defense Distributed retract the plans. [1]

Contents

The plans for the gun remain hosted across the Internet and are available at file sharing websites like The Pirate Bay [5] and GitHub. [6]

On July 19, 2018, the United States Department of Justice reached a settlement with Defense Distributed, allowing the sale of plans for 3D-printed firearms online, beginning August 1, 2018. [7]

On July 31, 2018, President of the United States Donald Trump posted on Twitter about the decision to allow the online publication of the Liberator's files: "I am looking into 3-D Plastic Guns being sold to the public. Already spoke to NRA, doesn’t seem to make much sense!" [8]

On the same day the tweet was posted, a federal judge stopped the release of blueprints to make the Liberator due to it being an untraceable and undetectable 3D-printed plastic gun, citing safety concerns. [9]

On April 27, 2021, the United States Court of Appeals for the Ninth Circuit vacated the injunction and ordered the district court to dismiss the case, holding that Congress had expressly prohibited judicial review of the agency decisions in question. [10] President Joe Biden announced in early April that the Justice Department would issue new rules for "ghost guns" within 30 days. [11] [ needs update ]

Namesake and concept

The pistol is named after the FP-45 Liberator, a single-shot pistol that George Hyde designed and that the Inland Manufacturing Division of the General Motors Corporation mass-produced for the United States Office of Strategic Services (OSS) in World War II. The OSS intended to air drop the gun into occupied Europe for resistance forces to use. [12] [13] [14] A project of the OSS (which would later become the CIA), it is thought the Liberator was equally purposed as a tool of psychological warfare. [12] Occupying forces in Europe would have to weigh evidence of distributed pistols as a factor in planning against civilian resistance, which would complicate their strategy and affect morale. However, though used in France, there is little proof that the pistols were ever dropped into occupied Europe in large quantities. [12]

The physible Liberator's release to the Internet can be understood as Defense Distributed's attempt to more successfully execute the historical psychological operation, and as a symbolic act supporting resistance to world governments. [14] [15]

Withdrawal of plans and The Pirate Bay hosting

Digital Liberator pistol by Defense Distributed DDLiberator2.3.jpg
Digital Liberator pistol by Defense Distributed

Days after their publication, the United States Department of State's Office of Defense Trade Controls issued a letter to Defense Distributed demanding that it retract the Liberator plans from public availability. [16] The State Department justified this demand by asserting the right to regulate the flow of technical data related to arms, and its role in enforcing the Arms Export Control Act of 1976.

However, soon thereafter the design appeared on The Pirate Bay (TPB), which publicly stated its defense of the information. Quoted on TorrentFreak: "TPB has for close to 10 years been operating without taking down one single torrent due to pressure from the outside. And it will never start doing that." [5]

The site would go on to issue a statement on its Facebook page:

So apparently there are some 3D prints of guns in the physibles section at TPB. Prints that the US government now claim ownership of. Our position is, as always, to not delete any torrents as long as its contents are as stated in the torrents description. Printable guns [are] a very serious matter that will be up for debate for a long time from now. We don't condone gun violence. We believe that the world needs less guns, not more of them. We believe however that these prints will stay on the internets regardless of blocks and censorship, since that's how the internets works. If there's a lunatic out there who wants to print guns to kill people, he or she will do it. With or without TPB. Better to have these prints out in the open internets (TPB) and up for peer review (the comment threads), than semi hidden in the darker parts of the internet.

— The Pirate Bay, May 10, 2013

Reception

Original copies of the Liberator have been permanently acquired by the Victoria and Albert Museum, [17] [18] [19] and a copy of the gun is on display at London's Science Museum.

Writing in The Register , Lewis Page ridiculed the Liberator, stating "it isn't any more a gun than any other very short piece of plastic pipe is a "gun"", and comparing it with a 1950s zip gun. [20]

Usage history

ATF test of 3-D printed firearm using ABS material
ATF test of 3-D printed firearm using VisiJet material

In May 2013, Finnish Yle TV2 current affairs programme Ajankohtainen kakkonen produced a Liberator handgun under the supervision of a licensed gunsmith and fired it under controlled conditions. During the experiment, the weapon shattered. [21] [22] It was later found that an error was made concerning the settings of the 3D printer. Printed under the right conditions, the Liberator gun has a lifespan of 8–10 shots. [23]

Israeli Channel 10 reporters built and tested a Liberator with a 9 mm cartridge, successfully hitting a target at a distance of several meters. On June 24, 2013, the reporters smuggled the gun (without barrel and ammunition) into the Israeli house of parliament, coming within a short distance of Israeli PM Benjamin Netanyahu. [24]

A Japanese man printed and assembled five copies of the Liberator, and on or about April 12, 2014, he uploaded video evidence of his possession of the weapons to the internet. Authorities arrested him on May 8, 2014, and found that at least two of the copies possessed lethal power. [25] Cody Wilson, a founder of Defense Distributed, stated on the incident that the man "performed his work in the open, without suspicion, fear or dishonor". [26]

See also

Related Research Articles

<span class="mw-page-title-main">Receiver (firearms)</span> Firearm component that houses the operating parts of the weapon

In firearms terminology and at law, the firearm frame or receiver is the part of a firearm which integrates other components by providing housing for internal action components such as the hammer, bolt or breechblock, firing pin and extractor, and has threaded interfaces for externally attaching ("receiving") components such as the barrel, stock, trigger mechanism and iron/optical sights. Various firearm receivers often come with 1 or 2 sections, the upper receiver which houses the barrel/trunnion, bolt components etc and the lower receiver that holds the fire control group, pistol grip, selector, stock etc.

<span class="mw-page-title-main">FP-45 Liberator</span> Single-shot handgun, derringer

The FP-45 Liberator is a handgun manufactured by the United States military during World War II for use by resistance forces in occupied territories. The Liberator was never issued to American or other Allied troops, and there are few documented instances of the weapon being used for its intended purpose; this was compounded by the intended recipients – irregulars and resistance fighters – rarely keeping detailed records due to the inherent risks if the records were captured by the enemy. Few FP-45 pistols were distributed as intended, and most were destroyed by Allied forces after the war.

<span class="mw-page-title-main">The Pirate Bay</span> Website providing torrent files and magnet links

The Pirate Bay, commonly abbreviated as TPB, is a freely searchable online index of movies, music, video games, pornography and software. Founded in 2003 by Swedish think tank Piratbyrån, The Pirate Bay facilitates the connection among users of the peer-to-peer torrent protocol, which are able to contribute to the site through the addition of magnet links. The Pirate Bay has consistently ranked as one of the most visited torrent websites in the world.

<span class="mw-page-title-main">Improvised firearm</span> Makeshift ranged weapon

Improvised firearms are firearms manufactured by an entity other than a registered firearms manufacturer or a gunsmith. Improvised firearms are typically constructed by adapting existing materials to the purpose. They range in quality, from crude weapons that are as much a danger to the user as the target, to high-quality arms produced by cottage industries using salvaged and repurposed materials.

<span class="mw-page-title-main">Defense Distributed</span> American non-profit developing digital firearm schematics

Defense Distributed is an online, open-source hardware and software organization that develops digital schematics of firearms in CAD files, or "wiki weapons", that may be downloaded from the Internet and used in 3D printing or CNC milling applications. Among the organization's goals is to develop and freely publish firearms-related design schematics that can be downloaded and reproduced by anyone with a 3D printer or milling machine, facilitating the popular production of homemade firearms.

<span class="mw-page-title-main">Cody Wilson</span> American weapons developer

Cody Rutledge Wilson is an American gun rights activist and crypto-anarchist. He started Defense Distributed, a non-profit organization which develops and publishes open source gun designs, so-called "wiki weapons" created by 3D printing and digital manufacture. He is the director of Defense Distributed; it gained international notoriety in 2013 when it published plans online for the Liberator, the first widely available functioning 3D-printed pistol.

<span class="mw-page-title-main">DEFCAD</span> American technology company

DEFCAD, Inc. is an American startup that has created a search engine and web portal for designers and hobbyists to find and develop 3D printable and other CAD models online.

<span class="mw-page-title-main">Charon (gun)</span>

The DEFCAD Charon is an open source 3D-printable AR-15 lower receiver project that was partially inspired by the Fabrique Nationale P90. It began as a design exercise by a DEFCAD user to explore FDM additive manufacturing technology as a means of integrating the P90's ergonomics into a stock for the AR-15, resulting in the WarFairy P-15 stock set.

<span class="mw-page-title-main">3D printed firearm</span> Firearm created using 3D printing

A 3D printed firearm is a firearm that is partially or primarily produced with a 3D printer. While plastic printed firearms are associated with improvised firearms, or the politics of gun control, digitally-produced metal firearms are more associated with commercial manufacturing or experiments in traditional firearms design.

<span class="mw-page-title-main">Undetectable Firearms Act</span> US law

The United States Undetectable Firearms Act of 1988 makes it illegal to manufacture, import, sell, ship, deliver, possess, transfer, or receive any firearm that is not as detectable by walk-through metal detection as a security exemplar containing 3.7 oz of steel, or any firearm with major components that do not generate an accurate image before standard airport imaging technology.

The G22 Grizzly is a series of 3D-printed, single-shot, break-action rifles that fire .22LR cartridges. Initially developed in 2013 by a Canadian designer known by the pseudonym "Matthew", the G22 Grizzly has evolved through multiple iterations, with each version improving design, functionality, and printability. It is known for its high level of 3D-printability, requiring minimal non-printable metal parts. The latest version, G22v4, was released in September 2023.

The Feinstein AK Mag is a 3D printed magazine for the AK-47 rifle. It was created by Defense Distributed and made public in March 2013. The magazine was created using a Stratasys Dimension SST 3-D printer via the fused deposition modeling (FDM) method.

The Cuomo Mag is a 3D printed AR-15 magazine named after the Governor of New York, Andrew Cuomo, who signed the NY SAFE Act into law banning magazines capable of holding more than 10 rounds of ammunition. It was created by Defense Distributed and made public around January 2013

The Hanuman AR-15 Bullpup which was made public in May 2014 is a prototype AR-15 rifle Bullpup created by WarFairy

<i>Defense Distributed v. United States Department of State</i> 2018 US federal court case about 3D printing of firearms

Defense Distributed v. U.S. Dept. of State is a set of court cases brought by Defense Distributed challenging the federal export control of 3D gun files on the Internet.

<span class="mw-page-title-main">FGC-9</span> 3D-printable firearm

The FGC-9 is a 3D-printable, semi-automatic, pistol-caliber carbine. The firearm was first designed and manufactured between 2018 and 2020 by Jacob Duygu, a Kurdish German gun designer known by the pseudonym "JStark1809". In April 2021, a "MkII" revision was released. As of 2024, the FGC-9 is "by far" the world's most common 3-D printed gun, used by insurgents, militia members, terrorists, and drug traffickers in "at least 15 countries". The gun's most prominent promoter and co-designer is "Ivan The Troll," a man identified as John Elik in legal documents.

<span class="mw-page-title-main">Deterrence Dispensed</span> Online group developing open-source firearm technology

Deterrence Dispensed (DetDisp) is a decentralized, online collective that promotes and distributes designs for open-source 3D printed firearms, gun parts, and handloaded cartridges. The group describes itself as aligned with the freedom of speech and anti-copyright movements.

<i>Death Athletic</i> 2023 film by Jessica Solce about Cody Wilson of Defense Distributed

Death Athletic: A Dissident Architecture is a 2023 American documentary film written, produced, and directed by Jessica Solce about the life of 3D printed gun inventor, Cody Wilson, over a period of around 7 years, from 2015 through 2022.

<i>Come and Take It: The Gun Printers Guide to Thinking Free</i> 2016 book by Cody Wilson

Come and Take It: The Gun Printer's Guide to Thinking Free is an autobiographical book written by American gun rights activist, author and crypto-anarchist, Cody Wilson in 2016.

References

  1. 1 2 Greenberg, Andy (May 8, 2013). "3D-Printed Gun's Blueprints Downloaded 100,000 Times In Two Days (With Some Help From Kim Dotcom)". Forbes. Archived from the original on April 8, 2023. Retrieved May 13, 2013.
  2. ↑ "US government orders removal of Defcad 3D-gun designs". BBC News. May 10, 2013. Archived from the original on April 12, 2023. Retrieved May 13, 2013.
  3. ↑ Biggs, John (May 6, 2013). "What You Need To Know About The Liberator 3D-Printed Pistol". TechCrunch. Archived from the original on March 26, 2017. Retrieved May 13, 2013.
  4. ↑ Hutchinson, Lee (May 4, 2013). "The first entirely 3D-printed handgun is here". Ars Technica. Archived from the original on August 1, 2022. Retrieved May 13, 2013.
  5. 1 2 Van der Sar, Ernesto (May 10, 2013). "Pirate Bay Takes Over Distribution of Censored 3D Printable Gun". TorrentFreak. Archived from the original on April 26, 2023. Retrieved May 13, 2013.
  6. ↑ "The 3D printed gun scare never actualized". The Outline . January 27, 2017. Archived from the original on April 8, 2023. Retrieved February 25, 2018.
  7. ↑ Uria, Daniel (July 19, 2018). "Justice Department settlement allows sale of 3-D printed gun plans". UPI . Archived from the original on July 30, 2018. Retrieved July 20, 2018.
  8. ↑ Holpuch, Amanda (July 31, 2018). "Trump queries 3D printed guns – which administration helped make available to public". The Guardian . Archived from the original on April 8, 2023.
  9. ↑ "Judge blocks the release of blueprints for 3D-printed guns". CNBC. August 1, 2018. Archived from the original on April 9, 2023. Retrieved August 4, 2018.
  10. ↑ "State of Washington v. U.S. Dep't of State" (PDF). United States Court of Appeals for the Ninth Circuit . April 27, 2021. Archived from the original (PDF) on April 7, 2023.
  11. ↑ Iovino, Nicholas (April 27, 2021). "Ninth Circuit Lifts Ban on 3D-Printed Gun Blueprints". Courthouse News Service . Archived from the original on April 9, 2023.
  12. 1 2 3 Hagan, Ralph (1996). The Liberator Pistol. Target Sales. ISBN   978-0-96544-963-2.
  13. ↑ Melton, H. (1991). OSS Special Weapons & Equipment. Sterling Pub Co Inc. ISBN   978-0-80698-238-0.
  14. 1 2 Greenberg, Andy (May 5, 2013). "Meet The 'Liberator': Test-Firing The World's First Fully 3D-Printed Gun". Forbes. Archived from the original on April 17, 2023. Retrieved May 13, 2013.
  15. ↑ Slowik, Max (July 1, 2013). "3D Printing Community Updates Liberator with Rifle, Pepperbox and Glock-Powered 'Shuty-9'". Guns.com. Archived from the original on July 23, 2015. Retrieved July 28, 2013.
  16. ↑ Greenberg, Andy (May 9, 2013). "State Department Demands Takedown Of 3D-Printable Gun Files For Possible Export Control Violations". Forbes. Archived from the original on April 14, 2023. Retrieved May 13, 2013.
  17. ↑ Fairs, Marcus (September 15, 2013). "V&A museum acquires first 3D-printed gun". Dezeen . Archived from the original on April 9, 2023. Retrieved December 31, 2013.
  18. ↑ "V&A museum to display printed gun". BBC Online . September 15, 2013. Archived from the original on April 17, 2023. Retrieved December 31, 2013.
  19. ↑ Lee, Felicia (September 16, 2013). "3-D Printed Gun Goes on Display at London Museum". The New York Times . Archived from the original on April 10, 2023. Retrieved December 31, 2013.
  20. ↑ Page, Lewis (May 10, 2013). "'Liberator': Proof that you CAN'T make a working gun in a 3D printer". The Register. Archived from the original on April 8, 2023. Retrieved July 12, 2017.
  21. ↑ Richt, Jyrki (May 14, 2013). "Toimiko 3D-pistooli? Katso video" [Did the 3D gun work? Watch the video]. Yle Uutiset (in Finnish). Archived from the original on April 12, 2023. Retrieved September 19, 2015.
  22. ↑ Richt, Jyrki (May 15, 2013). "'Liberator' 3D-printed handgun fails after single shot in Finnish test". Yle Uutiset. Archived from the original on April 28, 2023. Retrieved September 19, 2015.
  23. ↑ Mearian, Lucas (May 30, 2014). "Lab tests show 3D printed guns can be useless -- and dangerous". Computerworld. Archived from the original on November 9, 2022. Defense Distributed has demonstrated its Liberator 3D printed gun successfully. The gun, however, has a limited lifespan, and it typically fails after eight to 10 shots.
  24. ↑ Lerer, Guy & Even, Uri (July 3, 2013). תחקיר חדשות 10: אקדח יורה מטרים ספורים מראש הממשלה [News Investigation 10: Gun fires a few meters from the Prime Minister]. Nana 10 (in Hebrew). Archived from the original on July 6, 2013. Retrieved July 3, 2013.
  25. ↑ "Man busted for possessing handguns made with 3-D printer". The Asahi Shimbun . May 9, 2014. Archived from the original on July 28, 2014. Retrieved May 9, 2014.
  26. ↑ "I have often been asked who the first person to be arrested for 3D gun printing would be". WikiWep DevBlog. May 2014. Archived from the original on January 31, 2019. Retrieved May 9, 2014.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.