Lie-Fang 1 | |
---|---|
Role | Two seat intermediate glider |
National origin | Chinese People's Republic |
Manufacturer | Tchan-Tia-Kou manufacturing centre, Shenyang |
Designer | J. Niespal |
First flight | 10 May 1958 |
The Lie-Fang 1 (English: Liberation 1), some sources Jeifang 1[ citation needed ], was one of the first gliders designed and built in China, though with Polish design input. It is an all-wood, two seat, intermediate training aircraft which first flew in 1958.
Polish glider experience played a significant part in the establishment of the activity in the young People's Republic of China. Polish aircraft were imported and some were built in China. [1] The design of the Lie-Fang, one of the first gliders to originate in China, was led by the Polish J. Niespal. He was assisted by two Chinese engineers, Tchen-Kuei-Wen and Li-Ti-Tuin. [2] Niespal had worked at the SZD (Experimental Sailplane Institute) in Poland, where the Mucha series was designed, and he used the 1953 SZD-12 Mucha 100 as a starting point. [3] There were many differences between the Mucha and the Lie-Fang, partly because the latter was a two-seat aircraft and therefore longer, with a much modified nose and more strongly forward-swept wings; the Lie-Fang's fuselage was a simpler, flat sided structure compared with the Mucha's oval section monocoque and the empennage was more angular. [2] [3]
The Lie-Fang is wood framed, with some use of the local "poton" wood and with a mixture of plywood and fabric covering. It has a high mid mounted single spar wing with a plywood covered torsion box leading edge, Behind the spar the wing is fabric covered. In plan it is straight tapered with unswept leading edges, resulting in forward sweep of 2° at one quarter chord. There is 4° of dihedral and 2° of washout. Its ailerons are slotted and fabric covered and spoilers, mounted behind the spar at about one third span, open above and below the wing. [2]
The fuselage is a flat sided monocoque which tapers gently to the rear, with the straight tapered tailplane mounted on top of it and forward of the fin. The rear surfaces are fabric covered. The straight edged rudder extends to the keel and moves in a cut-out between the elevators, one of which has a trim tab. The cockpit, mostly ahead of the wing leading edge, seats pupil and instructor in tandem with a single set of instruments that they can both see. The fixed, two part forward canopy reaches almost to the nose; a rear transparent section opens sideways for access to both seats. The Lie-Fang lands on a fixed monowheel undercarriage under the wing, fitted with brakes and aided by a short, rubber sprung nose skid and a tail bumper. [2]
The Lie-Fang made its first flight on 10 May 1958. It was cleared for cloud flying and classed as semi-aerobatic. [2] It went into production and was used an intermediate trainer, preparing students for their first solo flights in Chinese built Mucha 100s. [4]
Data from Jane's All the World's Aircraft 1962-63 [1] The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs du Monde Volume II [2]
General characteristics
Performance
The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.
The Slingsby T.37 Skylark 1 was a small low-cost sailplane built during 1952-3 at Kirbymoorside, Yorkshire by Slingsby Sailplanes.
The SZD-8 Jaskółka was a single-seat glider aircraft that was designed and built in Poland at Szybowcowy Zakład Doświadczalny in Bielsko-Biała from 1951.
The SZD-6x Nietoperz was a single-seat tail-less experimental glider aircraft that was designed and built in Poland at Szybowcowy Zakład Doświadczalny in Bielsko-Biała in 1951. Only one example was constructed.
The SZD-12 Mucha 100 was a single-seat glider aircraft that was designed and built in Poland from 1953.
The SZD-25A Lis was a single-seat glider aircraft that was designed and built in Poland from 1955, derived from the SZD-16 Gil and SZD-25 Nov.
The SZD-17X Jaskółka L was a single-seat high-performance competition glider designed and built in Poland at Szybowcowy Zakład Doświadczalny in Bielsko-Biała in 1955.
The SZD-20x Wampir II was a single-seat tail-less research glider designed and built in Poland from 1959.
The SZD-22 Mucha Standard was a single-seat aerobatic glider designed and built in Poland from 1957.
The Slingsby Type 45 Swallow was designed as a club sailplane of reasonable performance and price. One of the most successful of Slingsby's gliders in sales terms, over 100 had been built when production was ended by a 1968 factory fire.
The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.
The Neiva BN-1 was a high performance single seat sailplane designed in Brazil in the 1950s. It had national records, competition success, and went into production for club use.
The Matteson M-1 was an American high-wing, single-seat, FAI Open Class glider that was designed and built by Fred Matteson of Palo Alto, California and Alfred Vogt of Schempp-Hirth.
The Czerwiński Sparrow, sometimes known as the de Havilland Canada glider, was a single seat glider, designed and built by a group of de Haviiland engineers in Canada in 1942. It was intended to popularise gliding and be suitable for both basic training and thermal soaring.
The Schleicher K7 Rhönadler is a West German high-wing, two-seat, glider that was designed by Rudolf Kaiser and produced by Alexander Schleicher GmbH & Co.
The Ikarus Košava is a two-seat sailplane designed and built in Yugoslavia in the early 1950s. It won the 1954 World Gliding Championships in the two seat category and came second in the same event two years later.
The Cijan-Obad Orao is a competition single seat sailplane designed in Yugoslavia just after World War II, one of the most advanced of its type at the time. It flew in three World Gliding Championships, having greatest success at its first in 1950 when it reached third place.
The Horikawa H-23B-2 is a two-seat training glider designed and built in Japan in the 1950s. It was produced in small numbers.
The Horikawa H-22B-3 is a simple, open frame, two seat primary trainer glider designed and built in Japan in the 1950s.
The Antonov A-11 is a single-seat, high performance, all-metal sailplane built in the Soviet Union in the late 1950s. 150 were produced.