Linjesender

Last updated

A linjesender (English: "line transmitter") was a low-power longwave transmitter system used for broadcasting in Norway. It consisted of a power line communication system, which fed the radio programme on a frequency in the longwave broadcasting range into domestic powerlines.

Contents

The last linjesender in Norway was closed in 1987 although the Swiss counterpart survived another ten years.

Features

The typical powers used by linjesenders were between 250 watts and 2 kW. Most systems used frequencies in the longwave band or in between the LW and MW band although some used medium wave or frequencies below the standard LW band which required special receivers.

Wired broadcasting had several advantages over conventional broadcasting: [1]

  1. Less susceptible to interference
  2. Potentially greater number of programmes (as overcrowding on the frequency bands was less of a problem)
  3. Potentially greater audio quality as wired transmissions were not subject to the same restrictions on bandwidth as terrestrial AM broadcasts.
  4. In a mountainous country like Switzerland it was difficult to obtain satisfactory national coverage with conventional transmitters, particularly in the 1930s when transmissions were typically less powerful than today.

On the other hand there were practical and economic difficulties in extending such services to remote or thinly populated regions. Wired broadcasting could also be used by governments as a tool of censorship through promoting ownership of wire-only receivers which could not receive foreign stations.

Similar systems

Similar systems were used in Germany, where it was called "Drahtfunk" ("wire radio") and in Switzerland, where it was called "Telefonrundspruch" ("telephone broadcast"), both of these systems used domestic telephone lines. In some countries occupied by Germany during the Second World War these systems entirely replaced conventional broadcasting. In the Netherlands all standard receivers were confiscated and replaced with wire-only sets (Draadomroep) as these could receive local and German broadcasts but not enemy stations such as the BBC. Wire broadcast systems were also deployed in parts of the USSR.

In the 1930s some towns in Great Britain used wire broadcasting experimentally either over dedicated cables (sometimes as baseband audio) or through power lines. However as the coverage of conventional broadcast stations improved the popularity of these "radio relay" or "rediffusion" systems waned and local councils were often hostile to their installation.

Russia

In the former Soviet Union, cable radio was popular and Radio Rossii is reported to have had as many as forty million listeners. [2]

Initially the system had one channel that was transmitted as direct audio. The wires and plugs for the system were the same as for standard power wires and plugs which could cause receivers to burn out by attaching to mains socket. During World War II, all RF receivers were confiscated, [3] but cable radio continued operating and, in particular, was used to transmit warnings of aerial bombing. The 1960s saw an enhancement with the addition of two additional channels, using AM on carrier frequencies of 78 and 120 kHz. The installation of this system became mandatory for all new buildings. The system, along with usual broadcasting, was created to inform people of emergencies.

Today, cable radio outlets are installed in all new homes, but many people don't use them or even uninstall the socket and wires inside their units. However, they continue to pay the mandatory fee (as of 2019, the price in Moscow is approx. 1.56 EUR per month). These payments can be avoided, but due to bureaucratic procedure it is rarely used. [ further explanation needed ] There were similar systems in other Soviet republics, such as Ukraine

See also

Related Research Articles

<span class="mw-page-title-main">Amplitude modulation</span> Radio modulation via wave amplitude

Amplitude modulation (AM) is a modulation technique used in electronic communication, most commonly for transmitting messages with a radio wave. In amplitude modulation, the amplitude of the wave is varied in proportion to that of the message signal, such as an audio signal. This technique contrasts with angle modulation, in which either the frequency of the carrier wave is varied, as in frequency modulation, or its phase, as in phase modulation.

<span class="mw-page-title-main">Repeater</span> Relay station

In telecommunications, a repeater is an electronic device that receives a signal and retransmits it. Repeaters are used to extend transmissions so that the signal can cover longer distances or be received on the other side of an obstruction. Some types of repeaters broadcast an identical signal, but alter its method of transmission, for example, on another frequency or baud rate.

<span class="mw-page-title-main">Shortwave radio</span> Radio transmissions using wavelengths between 10 and 100 m

Shortwave radio is radio transmission using shortwave (SW) radio frequencies. There is no official definition of the band, but the range always includes all of the high frequency band (HF), which extends from 3 to 30 MHz ; above the medium frequency band (MF), to the bottom of the VHF band.

<span class="mw-page-title-main">Medium wave</span> Radio transmission using wavelengths 200-1000 m

Medium wave (MW) is the part of the medium frequency (MF) radio band used mainly for AM radio broadcasting. The spectrum provides about 120 channels with more limited sound quality than FM stations on the FM broadcast band. During the daytime, reception is usually limited to more local stations, though this is dependent on the signal conditions and quality of radio receiver used. Improved signal propagation at night allows the reception of much longer distance signals. This can cause increased interference because on most channels multiple transmitters operate simultaneously worldwide. In addition, amplitude modulation (AM) is often more prone to interference by various electronic devices, especially power supplies and computers. Strong transmitters cover larger areas than on the FM broadcast band but require more energy and longer antennas. Digital modes are possible but have not reached momentum yet.

<span class="mw-page-title-main">AM broadcasting</span> Radio broadcasting using amplitude modulation

AM broadcasting is radio broadcasting using amplitude modulation (AM) transmissions. It was the first method developed for making audio radio transmissions, and is still used worldwide, primarily for medium wave transmissions, but also on the longwave and shortwave radio bands.

<span class="mw-page-title-main">Carrier wave</span> Waveform that is modulated with a signal to convey information

In telecommunications, a carrier wave, carrier signal, or just carrier, is a waveform that is modulated (modified) with an information-bearing signal for the purpose of conveying information.

<span class="mw-page-title-main">Medium frequency</span> The range 300-3000 kHz of the electromagnetic spectrum

Medium frequency (MF) is the ITU designation for radio frequencies (RF) in the range of 300 kilohertz (kHz) to 3 megahertz (MHz). Part of this band is the medium wave (MW) AM broadcast band. The MF band is also known as the hectometer band as the wavelengths range from ten to one hectometers. Frequencies immediately below MF are denoted as low frequency (LF), while the first band of higher frequencies is known as high frequency (HF). MF is mostly used for AM radio broadcasting, navigational radio beacons, maritime ship-to-shore communication, and transoceanic air traffic control.

<span class="mw-page-title-main">Longwave</span> Radio transmission using wavelengths above 1000 m

In radio, longwave, long wave or long-wave, and commonly abbreviated LW, refers to parts of the radio spectrum with wavelengths longer than what was originally called the medium-wave broadcasting band. The term is historic, dating from the early 20th century, when the radio spectrum was considered to consist of longwave (LW), medium-wave (MW), and short-wave (SW) radio bands. Most modern radio systems and devices use wavelengths which would then have been considered 'ultra-short'.

<span class="mw-page-title-main">Radiotelephone</span> Communications system for transmission of speech over radio

A radiotelephone, abbreviated RT, is a radio communication system for conducting a conversation; radiotelephony means telephony by radio. It is in contrast to radiotelegraphy, which is radio transmission of telegrams (messages), or television, transmission of moving pictures and sound. The term is related to radio broadcasting, which transmit audio one way to listeners. Radiotelephony refers specifically to two-way radio systems for bidirectional person-to-person voice communication between separated users, such as CB radio or marine radio. In spite of the name, radiotelephony systems are not necessarily connected to or have anything to do with the telephone network, and in some radio services, including GMRS, interconnection is prohibited.

<span class="mw-page-title-main">Digital Radio Mondiale</span> Digital radio broadcasting standard

Digital Radio Mondiale is a set of digital audio broadcasting technologies designed to work over the bands currently used for analogue radio broadcasting including AM broadcasting—particularly shortwave—and FM broadcasting. DRM is more spectrally efficient than AM and FM, allowing more stations, at higher quality, into a given amount of bandwidth, using xHE-AAC audio coding format. Various other MPEG-4 codecs and Opus are also compatible, but the standard now specifies xHE-AAC.

Digital radio is the use of digital technology to transmit or receive across the radio spectrum. Digital transmission by radio waves includes digital broadcasting, and especially digital audio radio services.

<span class="mw-page-title-main">Warsaw radio mast</span> Collapsed radio mast in Poland

The Warsaw Radio Mast was a radio mast located near Gąbin, Poland, and the world's tallest structure at 2,120 ft from 1974 until its collapse on 8 August 1991. The mast was designed for extreme height in order to broadcast Communist propaganda around the world, including to the remotest areas such as Antarctica. As of 2023, it was the third-tallest structure ever built, after the Burj Khalifa tower in the United Arab Emirates in 2009, and Merdeka 118 tower in Malaysia in 2022.

<span class="mw-page-title-main">Radio receiver</span> Device for receiving radio broadcasts

In radio communications, a radio receiver, also known as a receiver, a wireless, or simply a radio, is an electronic device that receives radio waves and converts the information carried by them to a usable form. It is used with an antenna. The antenna intercepts radio waves and converts them to tiny alternating currents which are applied to the receiver, and the receiver extracts the desired information. The receiver uses electronic filters to separate the desired radio frequency signal from all the other signals picked up by the antenna, an electronic amplifier to increase the power of the signal for further processing, and finally recovers the desired information through demodulation.

RTÉ Radio 1 is an Irish national radio station owned and operated by RTÉ and is the direct descendant of Dublin radio station 2RN, which began broadcasting on a regular basis on 1 January 1926.

<span class="mw-page-title-main">Tuner (radio)</span> Frequency selection subsystem for various receiver systems

A tuner is a subsystem that receives radio frequency (RF) transmissions, such as FM broadcasting, and converts the selected carrier frequency and its associated bandwidth into a fixed frequency that is suitable for further processing, usually because a lower frequency is used on the output. Broadcast FM/AM transmissions usually feed this intermediate frequency (IF) directly into a demodulator that converts the radio signal into audio-frequency signals that can be fed into an amplifier to drive a loudspeaker.

Carrier current transmission, originally called wired wireless, employs guided low-power radio-frequency signals, which are transmitted along electrical conductors. The transmissions are picked up by receivers that are either connected to the conductors, or a short distance from them. Carrier current transmission is used to send audio and telemetry to selected locations, and also for low-power broadcasting that covers a small geographical area, such as a college campus. The most common form of carrier current uses longwave or medium wave AM radio signals that are sent through existing electrical wiring, although other conductors can be used, such as telephone lines.

<span class="mw-page-title-main">Cable radio</span> Sound content transmitted via signals on coaxial cable

Cable radio or cable FM is a concept similar to that of cable television, bringing radio broadcasting into homes and businesses via coaxial cable. It is generally used for the same reason as cable TV was in its early days when it was "community antenna television", in order to enhance the quality of over-the-air radio signals that are difficult to receive in an area. However, cable-only radio outlets also exist.

<span class="mw-page-title-main">FM broadcasting</span> Radio transmission of audio by frequency modulation

FM broadcasting is a method of radio broadcasting that uses frequency modulation (FM) of the radio broadcast carrier wave. Invented in 1933 by American engineer Edwin Armstrong, wide-band FM is used worldwide to transmit high-fidelity sound over broadcast radio. FM broadcasting offers higher fidelity—more accurate reproduction of the original program sound—than other broadcasting techniques, such as AM broadcasting. It is also less susceptible to common forms of interference, having less static and popping sounds than are often heard on AM. Therefore, FM is used for most broadcasts of music and general audio. FM radio stations use the very high frequency range of radio frequencies.

<span class="mw-page-title-main">Wireless microphone</span> Microphone without a physical cable

A wireless microphone, or cordless microphone, is a microphone without a physical cable connecting it directly to the sound recording or amplifying equipment with which it is associated. Also known as a radio microphone, it has a small, battery-powered radio transmitter in the microphone body, which transmits the audio signal from the microphone by radio waves to a nearby receiver unit, which recovers the audio. The other audio equipment is connected to the receiver unit by cable. In one type the transmitter is contained within the handheld microphone body. In another type the transmitter is contained within a separate unit called a "bodypack", usually clipped to the user's belt or concealed under their clothes. The bodypack is connected by wire to a "lavalier microphone" or "lav", a headset or earset microphone, or another wired microphone. Most bodypack designs also support a wired instrument connection. Wireless microphones are widely used in the entertainment industry, television broadcasting, and public speaking to allow public speakers, interviewers, performers, and entertainers to move about freely while using a microphone without requiring a cable attached to the microphone.

<span class="mw-page-title-main">Radio</span> Technology of using radio waves to carry information

Radio is the technology of signaling and communicating using radio waves. Radio waves are electromagnetic waves of frequency between 3 hertz (Hz) and 3,000 gigahertz (GHz). They are generated by an electronic device called a transmitter connected to an antenna which radiates the waves, and received by another antenna connected to a radio receiver. Radio is widely used in modern technology, in radio communication, radar, radio navigation, remote control, remote sensing, and other applications.

References

  1. "Drahtfunk / Telephon Rundspruch". Buizenradio en zo... / De afstemschaal (in Dutch). Archived from the original on 2 April 2007. Retrieved 22 July 2011.
  2. Archived 2010-02-07 at the Wayback Machine , 8 August 2001
  3. "Могут быть использованы вражескими элементами". Журнал "Коммерсантъ Власть" (in Russian). Kommersant. 2016-06-13. p. 45. Retrieved 2018-04-25.
  4. "Storia della filodiffusione" [The history of Filodiffusione]. Radio5 Classica (in Italian). Retrieved 2022-12-10.