 | |
| Product type |
|
|---|---|
| Owner | Henkel North American Consumer Goods |
| Country | Rocky Hill, Connecticut, U.S. [1] |
| Introduced | 1956 |
| Markets | Worldwide |
| Website | loctite |
Loctite is a German [1] brand of adhesives, sealants, surface treatments, and other industrial chemicals that include acrylic, anaerobic, cyanoacrylate, epoxy, hot melt, silicone, urethane, and UV/light curing technologies. Loctite products are sold globally and are used in a variety of industrial and hobbyist applications.
In 1953, American professor Vernon K. Krieble developed anaerobic threadlocking adhesives in his basement laboratory at Trinity College in Hartford, Connecticut. Krieble’s company, American Sealants, founded the Loctite brand, which was promoted as ushering in a new era of mechanical reliability by eliminating the vibrational loosening of mechanical fasteners, a frequent cause of machine failure. [2] In 1956, the name Loctite was chosen by Krieble’s daughter-in-law, Nancy Brayton Krieble. [3] The Loctite sealant made its official public debut at a press conference at the University Club of New York on July 26 of that year.
In 1963, American Sealants changed its name to the Loctite Corporation. After Vernon Krieble's death in 1964, his son Robert H. Krieble, also a chemist, served as chief executive until 1985. The Vernon K. Krieble Foundation was established in 1984 in honor of the co-founder.
In 1964, Loctite introduced cyanoacrylate adhesives (a repackaged Eastman product, developed at Tennessee Eastman/Eastman Chemical in 1942, and originally marketed as "Eastman 910"), later known as “Super Glue”. [4] It was the first of many new products, including silicones, epoxies, acrylics, and the development of new Loctite anaerobics. The 1980s brought about the addition of a line of micro anaerobic adhesives. [5]
In 1997, Loctite was acquired as a flagship brand by Henkel, a German Fortune 500 company. [6] Since then, Loctite has remained a primary Henkel brand and a supplier of household adhesives, epoxies, spray adhesives, construction adhesives, home repair, sealants, and fillers. In recent years, the company has increased its focus on green and sustainable technologies. [7]
Products made with Loctite branding include:
Adhesive, also known as glue, cement, mucilage, or paste, is any non-metallic substance applied to one or both surfaces of two separate items that binds them together and resists their separation.
Cyanoacrylates are a family of strong fast-acting adhesives with industrial, medical, and household uses. They are derived from ethyl cyanoacrylate and related esters. The cyanoacrylate group in the monomer rapidly polymerizes in the presence of water to form long, strong chains.
![<span class="mw-page-title-main">Silicone</span> Family of polymers of the repeating form [R2Si–O–SiR2]](https://upload.wikimedia.org/wikipedia/commons/thumb/3/37/Caulking.jpg/320px-Caulking.jpg)
In organosilicon and polymer chemistry, a silicone or polysiloxane is a polymer composed of repeating units of siloxane. They are typically colorless oils or rubber-like substances. Silicones are used in sealants, adhesives, lubricants, medicine, cooking utensils, thermal insulation, and electrical insulation. Some common forms include silicone oil, grease, rubber, resin, and caulk.
In materials science, a thermosetting polymer, often called a thermoset, is a polymer that is obtained by irreversibly hardening ("curing") a soft solid or viscous liquid prepolymer (resin). Curing is induced by heat or suitable radiation and may be promoted by high pressure or mixing with a catalyst. Heat is not necessarily applied externally, and is often generated by the reaction of the resin with a curing agent. Curing results in chemical reactions that create extensive cross-linking between polymer chains to produce an infusible and insoluble polymer network.
Bostik is a manufacturer and distributor of adhesives and sealants for the construction, industrial and consumer markets. With annual sales of €2.1 billion, the company employs 6,000 people and has a presence in more than 40 countries. Bostik is part of the French-based, Arkema group.
Araldite is a registered trademark of Huntsman Advanced Materials referring to their range of engineering and structural epoxy, acrylic, and polyurethane adhesives. Swiss manufacturers originally launched Araldite DIY adhesive products in 1946. The first batches of Araldite epoxy resins, for which the brand is best known, were made in Duxford, England in 1950.
Polyoxymethylene (POM), also known as acetal, polyacetal, and polyformaldehyde, is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability. As with many other synthetic polymers, it is produced by different chemical firms with slightly different formulas and sold variously by such names as Delrin, Kocetal, Ultraform, Celcon, Ramtal, Duracon, Kepital, Polypenco, Tenac and Hostaform.
Henkel AG & Co. KGaA, commonly known as Henkel, is a German multinational chemical and consumer goods company headquartered in Düsseldorf, Germany.
Silicone rubber is an elastomer composed of silicone—itself a polymer—containing silicon together with carbon, hydrogen, and oxygen. Silicone rubbers are widely used in industry, and there are multiple formulations. Silicone rubbers are often one- or two-part polymers, and may contain fillers to improve properties or reduce cost. Silicone rubber is generally non-reactive, stable, and resistant to extreme environments and temperatures from −55 to 300 °C while still maintaining its useful properties. Due to these properties and its ease of manufacturing and shaping, silicone rubber can be found in a wide variety of products, including voltage line insulators; automotive applications; cooking, baking, and food storage products; apparel such as undergarments, sportswear, and footwear; electronics; medical devices and implants; and in home repair and hardware, in products such as silicone sealants.
Wood glue is an adhesive used to tightly bond pieces of wood together. Many substances have been used as glues. Traditionally animal proteins like casein from milk or collagen from animal hides and bones were boiled down to make early glues. They worked by solidifying as they dried. Later, glues were made from plant starches like flour or potato starch. When combined with water and heated, the starch gelatinizes and forms a sticky paste as it dries. Plant-based glues were common for books and paper products, though they can break down more easily over time compared to animal-based glues. Examples of modern wood glues include polyvinyl acetate (PVA) and epoxy resins. Some resins used in producing composite wood products may contain formaldehyde. As of 2021, “the wood panel industry uses almost 95% of synthetic petroleum-derived thermosetting adhesives, mainly based on urea, phenol, and melamine, among others”.
Elmer's Products, Inc. or simply Elmer's, is an American-based company that has a line of adhesive, craft, home repair, and office supply products. It is best known as the manufacturer of Elmer's Glue-All, a popular PVA-based synthetic glue, in addition to other brands including Krazy Glue, ProBond and CraftBond adhesives, and X-Acto cutting tools.
Sealant is a substance used to block the passage of fluids through openings in materials, a type of mechanical seal. In building construction sealant is sometimes synonymous with caulk and also serve the purposes of blocking dust, sound and heat transmission. Sealants may be weak or strong, flexible or rigid, permanent or temporary. Sealants are not adhesives but some have adhesive qualities and are called adhesive-sealants or structural sealants.
Anabond is the registered brand name of products manufactured by Anabond Limited, a company headquartered in Thiruvanmiyur, Chennai, India. It manufactures engineering adhesives and sealants which are used in automobile and engineering product manufacturing, electrical and electronic products manufacturing and maintenance of these equipment's. Anabond was the first company in India to manufacture anaerobic adhesives and sealants.
Thread-locking fluid or threadlocker is a single-component adhesive, applied to the threads of fasteners such as screws and bolts to prevent loosening, leakage, and corrosion.
RTV silicone is a type of silicone rubber that cures at room temperature. It is available as a one-component product, or mixed from two components. Manufacturers provide it in a range of hardnesses from very soft to medium—usually from 15 to 40 Shore A. RTV silicones can be cured with a catalyst consisting of either platinum or a tin compound such as dibutyltin dilaurate. Applications include low-temperature over-molding, making molds for reproducing, and lens applications for some optically clear grades. It is also used widely in the automotive industry as an adhesive and sealant, for example to create gaskets in-place.
Walter Brenner was an Austrian-American professor of chemical engineering and inventor. He also authored a number of patents, technical papers, magazine articles, and books. Brenner is recognized as having pioneered the development of high energy ionizing radiation for polymers to be used for industrial, aerospace, medical, and consumer applications. He died in December 2017 at the age of 94.
Pratley Putty is an epoxy putty adhesive. It was invented in the 1960s by South African George Montague Pratley, with the assistance of chemist Frank Robinson. It is produced by adhesive manufacturer Pratley.
Chemence is a speciality chemical and medical device manufacturer which products include cyanoacrylate adhesives, anaerobic adhesives, impregnation sealants, adhesive activators, epoxy resins, UV adhesives, photopolymer resins, custom printer ink cartridges, Gas pipe sealants, and soak off nail polishes. Chemence is a supplier of photopolymer and commercial printers to the flexographic industry in the US and Europe, as well as the primary sealant supplier to British Gas, and a primary supplier of private-label adhesives to companies including Tesco, 3M, Bostik, and Bondo. The company's catalogue of patents includes processes, packaging devices, and chemical combinations.
Adhesive bonding is a process by which two members of equal or dissimilar composition are joined. It is used in place of, or to complement other joining methods such mechanical fasting by the use nails, rivets, screws or bolts and many welding processes. The use of adhesives provides many advantages over welding and mechanical fastening in steel construction; however, many challenges still exist that have made the use of adhesives in structural steel components very limited.
Akemi GmbH is a company in the chemical industry which is active worldwide. Its headquarters are in Nuremberg in Germany and its core competence is the manufacturing of two-component adhesive systems. The chemical-technical specialist factory manufactures adhesives, fillers as well as cleaning and care products for the natural stone sector. In addition, it produces fillers and repair materials, sealants, protective coatings, varnishes as well as cleaning and car care products for the automotive branch.
| Subsidiaries |  | |
|---|---|---|
| Brands | ||
| Former brands | ||