S-1 Sport | |
---|---|
Role | Sport biplane |
National origin | United States of America |
Manufacturer | Loughead Aircraft Manufacturing Company |
Designer | Loughead brothers, John Northrop |
First flight | 11 April 1920 |
Introduction | 1920 San Francisco Aeronautical Exposition |
Produced | 1 |
Unit cost | $30,000 for prototype in 1919 $2500 list price in 1920. |
The Loughead S-1 "Sport-1" was an early single seat biplane made by the Loughead brothers, the forerunner to Lockheed.
The S-1 was developed to produce aircraft with existing capacity and skill of Loughead workers after the end of World War I contracts. The aircraft specifications were to be STOL, affordable, as well as capable of being stored in a garage and towed by a car. [1]
The S-1 was originally intended to be a two-seater, but was switched to a single place design to make production costs lower. The two cylinder engine was designed in-house by Anthony Stadlman. The fuselage was built using an all-wood, multi-layer monocoque laid up in concrete molds. The process would be later applied to the larger and more famous Lockheed Vega aircraft. The wings folded along the side of the aircraft for storage. [2] Roll control was via a system that pivoted the entire lower wing surfaces. They also could be pivoted a full 90 degrees as a massive air brake.
Only one prototype was built and test flown in 1920 by Gilbert G. Budwig. [3] The S-1 was not marketable against the flood of surplus World War I aircraft on the market at the time. The company was liquidated soon afterward in 1921 and reformed again with the new Lockheed Vega based on the S-1 in 1926.
The prototype does not exist, the engine is currently in private ownership. [4]
Data from Sport Aviation
General characteristics
Performance
The Lockheed Vega is an American six-passenger high-wing monoplane airliner built by the Lockheed Corporation starting in 1927. It became famous for its use by a number of record-breaking pilots who were attracted to the rugged and very long-range design. Amelia Earhart became the first woman to fly solo across the Atlantic Ocean in one, and Wiley Post used his to prove the existence of the jet stream after having flown around the world twice.
The Glasair I, originally built as the prototype Glasair TD taildragger, is a high-performance homebuilt aircraft built of fiberglass. Created by Tom Hamilton as a fast, two-seat kitplane, the Glasair TD was derived from the earlier Tom Hamilton Glasair and first flew in 1979. Hamilton formed Stoddard-Hamilton Aircraft that year to produce and market the kit, which was the first pre-molded composite aircraft available to builders.
The Luton L.A.5 Major was a 1930s British two-seat high-wing cabin monoplane. Following World War II, plans were made available to suit construction as a homebuilt aircraft.
The Piper PA-6 Sky Sedan was a 1940s American four-seat light aircraft designed and built in prototype form by Piper Aircraft at its Lock Haven, Pennsylvania, factory.
The Duruble Edelweiss is a light utility aircraft designed in France in the early 1960s and marketed for homebuilding. It is a low-wing cantilever monoplane with retractable tricycle undercarriage and all-metal construction. The aircraft was designed for a load factor of 9. Two- and four-seat versions were designed. The aircraft's creator, Roland Duruble flew the first example, a two-seater designated RD-02 in 1962, and in 1970 began to market plans for a stretched version with a rear bench seat as the RD-03. Over the next 15 years, 56 sets of plans had been sold, and at least nine Edelweisses finished and flown. In the 1980s, Duruble marketed an updated version of his original two-seater as the RD-02A, and sold around seven sets of plans, with at least one aircraft flying by 1985.
The EAA Biplane is a recreational aircraft that was designed in the United States in the late 1950s and marketed as plans for homebuilding.
The Junkers Ju 60 was a single engine airliner built in prototype form in Germany in the early 1930s. It was designed to meet a requirement issued by the Reichsverkehrsministerium for a German-built equivalent to the Lockheed Vega with which to equip Deutsche Luft Hansa. The result was a sleek, cantilever monoplane of conventional configuration, with wings skinned in the corrugated duralumin that had been a hallmark of Junkers designs up to this time, although this would be the last Junkers aircraft to have this feature. The main units of the tailwheel undercarriage were retractable.
The Stewart Headwind JD1HW1.7 and SAC-1VW is a single-seat high-wing tube-and-fabric construction homebuilt aircraft.
The Wag-Aero CUBy is a replica of the Piper J-3, designed by Dick Wagner and marketed by Wag-Aero of Lyons, Wisconsin as plans or in kit form.
The Church Midwing JC-1, a.k.a. Church Mid-Wing Sport, is a midwing racing aircraft designed by James Church using the fuselage of a Heath aircraft.
The Salvay-Stark Skyhopper I is a low-wing single-place homebuilt aircraft designed in 1944.
The Ra-Son Warrior or X-3 Warrior is a low wing bushplane with a large short coupled tail surface.
The Tachikawa T.S 1 was a light trainer prototype built in Japan.
The Schweizer SA 1-30 was the first entry by Schweizer in the powered aircraft market.
The Larsen Special II, is an early homebuilt aircraft that was designed and built in Norway. It was the first homebuilt aircraft to be issued a certificate of airworthiness in Norway.
The Lacey M-10 is an American homebuilt aircraft that was designed to use simple construction techniques.
The Richard 125 Commuter is a two-passenger homebuilt aircraft design.
The ATEC 321 Faeta is a Czech ultralight and light-sport aircraft, designed and produced by ATEC v.o.s. of Libice nad Cidlinou. It was developed from the earlier ATEC 122 Zephyr 2000. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Loughead F-1 "Flying-boat One" was an early American ten-passenger biplane flying boat made by the Loughead brothers' new company the Loughead Aircraft Manufacturing Company, the forerunner to Lockheed.
The Vega Model 2 Starliner was a prototype five-seat feeder airliner produced by the Vega Airplane Company, a subsidiary of Lockheed. It was designed to be powered by an unusual powerplant, consisting of two Menasco piston engines coupled together to drive a single propeller. A single example was built, flying in 1939, but no production followed.
|title=
(help)|title=
(help)