Low Mill

Last updated

Low Mill
Low Mills, Keighley.jpg
Low Mill, Keighley; north east face, looking south west
West Yorkshire UK location map.svg
Red pog.svg
Location within West Yorkshire
Cotton
Worsted
Current statusDerelict
LocationGresley Road, Keighley, West Yorkshire, England
Coordinates 53°51′58″N1°54′04″W / 53.866°N 1.901°W / 53.866; -1.901 Coordinates: 53°51′58″N1°54′04″W / 53.866°N 1.901°W / 53.866; -1.901
Construction
Built1776
Completed1780
Listed Building – Grade II*
Designated12 February 1979
Reference no. 1200162

Low Mill is a former textile mill in Keighley, West Yorkshire, England. It was the first industrial building in Keighley, and the first mill in Yorkshire to spin cotton, however, it later changed to being a worsted mill. The mill is now derelict and is a grade II* listed building, one of two in the town of Keighley. Its state of dereliction has led Historic England to place it on their 'at risk' register.

Contents

History

Building of the mill was started in 1776 by Thomas Ramsden, but it was completed in 1780 by the Clayton Brothers. [1] It was opened in 1780, and was the first industrial building in Keighley, whilst also being the first purpose built cotton-spinning mill in Yorkshire. [2] [3] Initially, the mill was powered by a waterwheel, using the adjacent River Worth, but the opening of the Leeds and Liverpool Canal in 1773, greatly increased importation of coal into Keighley, and the mill eventually became steam powered. [4]

To generate enough water pressure to power the mill-wheel, a large dam covering 2 acres (0.81 ha) was built which was fed by a mill-race (goit). A weir, some 200 yards (180 m) upstream, near to where North Beck enters the river, was built to feed the mill-race. [5] This proved problematic for other mills downstream, most notably Dalton Mills further downstream, who had a long-standing argument over the amount of water being diverted into Low Mill. [6]

The cotton-spinning equipment was built under the direction of Sir Richard Arkwright, [7] and a clutch of employees from Keighley travelled in 1780 to Arkwright's mill in Cromford, Derbyshire, for instruction on using the machines. [8] The mill was the only one in Yorkshire to used the patented Arkwright water frames under licence, but inflated charges, deterred others from using Arkwright's machines. [9] Between 1780 and 1787, the owners paid £4,200 to Arkwright and his partner in royalties for using the machines. [10] At some point in the 19th century, the mill was converted to the manufacture of worsted, [11] but its greatest employment year was in 1803, when over 200 workers had jobs at the mill; this made Low Mill the largest mill in Keighley in terms of employment. [12]

Details

The mill was built on a north–south axis and had three storeys. [13] Originally, the mill building was part of a larger site, however, the rest of the site has been levelled, with only the listed Low Mill structure left standing. [3] The area of derelict land which the mill sits in covers 0.8 acres (0.32 ha), and the combined mill floor-space is 6,230 square feet (579 m2). [14] Low Mill is a grade II* listed building. [11] A steam engine was built in the mill c. 1785, not for processing cotton, but for returning discharged water from the mill race into the dam above the mill. [15]

Since 2015, the site has been listed on the Historic England's Heritage at Risk Register. [16] Sometime during the 21st century, the historic water features in and around the mill have been concreted over, with Historic England describing the concreting as "..[an] act of heritage crime." [17]

Related Research Articles

Derwent Valley Mills World Heritage site in Derbyshire, England

Derwent Valley Mills is a World Heritage Site along the River Derwent in Derbyshire, England, designated in December 2001. It is administered by the Derwent Valley Mills Partnership. The modern factory, or 'mill', system was born here in the 18th century to accommodate the new technology for spinning cotton developed by Richard Arkwright. With advancements in technology, it became possible to produce cotton continuously. The system was adopted throughout the valley, and later spread so that by 1788 there were over 200 Arkwright-type mills in Britain. Arkwright's inventions and system of organising labour was exported to Europe and the United States.

Richard Arkwright English inventor and entrepreneur (1732–1792)

Sir Richard Arkwright was an English inventor and a leading entrepreneur during the early Industrial Revolution. He is credited as the driving force behind the development of the spinning frame, known as the water frame after it was adapted to use water power; and he patented a rotary carding engine to convert raw cotton to 'cotton lap' prior to spinning. He was the first to develop factories housing both mechanised carding and spinning operations.

Brierfield, Lancashire Town in Lancashire, England

Brierfield is a town and civil parish in the Borough of Pendle, in Lancashire, England. It is 2.5 miles (4.0 km) north east of Burnley, 1 mile (1.6 km) south west of Nelson, and 0.5 miles (0.8 km) north east of Reedley. The parish had a population of 8,193, at the census of 2011.

Cromford Human settlement in England

Cromford is a village and civil parish in Derbyshire, England, in the valley of the River Derwent between Wirksworth and Matlock. It is first mentioned in the 11th-century Domesday Book as Crumforde, a berewick of Wirksworth and this remained the case throughout the Middle Ages. The population at the 2011 Census was 1,433. It is principally known for its historical connection with Richard Arkwright, and the nearby Cromford Mill which he built outside the village in 1771. Cromford is in the Derwent Valley Mills World Heritage Site.

Cotton mill Building producing yarn or cloth from cotton

A cotton mill is a building that houses spinning or weaving machinery for the production of yarn or cloth from cotton, an important product during the Industrial Revolution in the development of the factory system.

Textile manufacture during the British Industrial Revolution Early textile production via automated means

Textile manufacture during the Industrial Revolution in Britain was centred in south Lancashire and the towns on both sides of the Pennines. In Germany it was concentrated in the Wupper Valley, Ruhr Region and Upper Silesia, in Spain it was concentrated in Catalonia while in the United States it was in New England. The main key drivers of the Industrial Revolution were textile manufacturing, iron founding, steam power, oil drilling, the discovery of electricity and its many industrial applications, the telegraph and many others. Railroads, steam boats, the telegraph and other innovations massively increased worker productivity and raised standards of living by greatly reducing time spent during travel, transportation and communications.

River Worth River in West Yorkshire, England

The River Worth is a river in West Yorkshire, England. It flows from minor tributaries on the moors above Watersheddles Reservoir down the Worth Valley to Haworth, where it is joined by Bridgehouse Beck which flows from Oxenhope. The River Worth is itself a tributary of the River Aire, which it joins at the end of the Worth Valley in Keighley.

Gayle, North Yorkshire A hamlet in North Yorkshire, England

Gayle is a hamlet sited 0.4-mile (0.64 km) south of Hawes in Wensleydale, North Yorkshire, England. The hamlet is noted for the beck that flows through it and the old mill, which featured on the BBC programme Restoration.

South Pennines Region of moorland and hills in northern England

The South Pennines is a region of moorland and hill country in northern England lying towards the southern end of the Pennines. In the west it includes the Rossendale Valley and the West Pennine Moors. It is bounded by the Greater Manchester conurbation in the west and the Bowland Fells and Yorkshire Dales to the north. To the east it is fringed by the towns of West Yorkshire whilst to the south it is bounded by the Peak District. The rural South Pennine Moors constitutes both a Site of Special Scientific Interest and Special Area of Conservation.

Cromford Mill

Cromford Mill is the world's first water-powered cotton spinning mill, developed by Richard Arkwright in 1771 in Cromford, Derbyshire, England. The mill structure is classified as a Grade I listed building. It is now the centrepiece of the Derwent Valley Mills UNESCO World Heritage Site, and is a multi-use visitor centre with shops, galleries, restaurants and cafes.

Shudehill Mill or Simpson's Mill was a very early cotton mill in Manchester city centre, England. It was built in 1782 by for Richard Arkwright and his partners and destroyed by fire in 1854. It was rebuilt and finally destroyed during the Manchester Blitz in 1940. One of Arkwright's larger mills, it was built three years before his patent lapsed. The mill had a 30 feet diameter water wheel and a Newcomen atmospheric engine was installed. Doubts remain as to why the engine was installed, whether it was a failed attempt to power a mill directly by steam or was modified to assist the wheel. It is possible that this engine, constructed by Hunt, could have been one of the 13 engines installed in Manchester mills by Joshua Wrigley. Water from the upper storage pond turned the water wheel to drive the mill. The steam engine recycled water from the lower storage pond to the upper storage pond. Three more Boulton and Watt engines were installed to power the increasing number of spindles.

Arkwright Mill, Rochdale Cotton mill in Greater Manchester, England

Arkwright Mill, Rochdale is a cotton spinning mill in Rochdale, Greater Manchester. It was built in 1885 by the Arkwright Cotton Spinning Co. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. It was located next to Dale Mill on Roch Street. The ring and doubling frames were made by Howard & Bullough, Accrington. The mill closed in 1980, was demolished in 2007 and the land redeveloped for housing.

Haarlem Mill Cotton mill in Derbyshire, England

Haarlem Mill, on the River Ecclesbourne in Wirksworth, Derbyshire, was an early cotton mill. Built by Richard Arkwright, it was the first cotton mill in the world to use a steam engine, though this was used to supplement the supply of water to the mill's water wheel, not to drive the machinery directly.

Gayle Mill, North Yorkshire

Gayle Mill, dating from about 1784, is thought to be the oldest structurally unaltered cotton mill in existence. It is located in the Wensleydale hamlet of Gayle, England, 1 mile (2 km) south of the market town of Hawes. It lies within the Yorkshire Dales National Park. The mill is owned by Cultura Trust (formerly known as the North of England Civic Trust ; it was operated by a local volunteer group which paid a modest rent to the owner until March 2018 when the property was closed to enable additional repairs to be undertaken to make it safe for visitors.

Bradford Dale (Yorkshire) Valley in West Yorkshire, England

Bradford Dale, is a side valley of Airedale that feeds water from Bradford Beck across the City of Bradford into the River Aire at Shipley in West Yorkshire, England. Whilst it is in Yorkshire and a dale, it is not part of the Yorkshire Dales and has more in common with Lower Nidderdale and Lower Airedale for its industrialisation.

Lumsdale Valley Valley in the Derbyshire Peak District

Lumsdale Valley is a steep-sided wooded gorge in the Peak District near Matlock, Derbyshire, in England. It is the location of a series of historic water-powered mills.

Hope Mill Cotton mill in Ancoats, Manchester, England

Hope Mill on Pollard Street, in the district of Ancoats, Manchester, England, is a cotton mill dating from 1824. A steam-driven mill, its engines were constructed by the Birmingham firm of Boulton and Watt. Derelict by the mid-20th century, the building was redeveloped in 2001 and now houses a range of creative industries, including the Hope Mill Theatre. Hope Mill is a Grade II* listed building.

British industrial architecture Architecture of industries in UK

British industrial architecture has been created, mainly from 1700 onwards, to house industries of many kinds in Britain, home of the Industrial Revolution in this period. Both the new industrial technologies and industrial architecture soon spread worldwide. As such, the architecture of surviving industrial buildings records part of the history of the modern world.

References

  1. ↑ Knights, David (9 November 2017). "Low Mill in Keighley on sale for £250,000". Keighley News. Retrieved 17 December 2020.
  2. ↑ Thompson, W J (1989). A Brief guide to the industrial heritage of West Yorkshire. Ironbridge, Telford [England]: Industrial Archaeology. p. 2. ISBN   0-9508448-3-7.
  3. 1 2 EOP 2016, p. 11.
  4. ↑ Gill, M C (2004). "Keighley Coal: a history of coal mining in the Keighley District". British Mining. Sheffield: Northern Mines Research Society (74): 7. ISSN   0308-2199.
  5. ↑ Shand, Alistair (21 December 2020). "MEMORY LANE: Proud history of a now-derelict Keighley cotton mill". Keighley News. Retrieved 1 March 2021.
  6. ↑ EOP 2016, p. 12.
  7. ↑ Young, Chris (15 December 2020). "Steel workshop could be built next to Grade-II listed mill in West Yorkshire". The Yorkshire Post. Retrieved 29 April 2021.
  8. ↑ Hodgson, John (1879). Textile manufacture, and other industries in Keighley. Keighley: A Hey. pp. 212–213. OCLC   18499486.
  9. ↑ Ingle 1997, p. 161.
  10. ↑ Ingle 1997, p. 168.
  11. 1 2 Historic England. "Mill buildings at Low Mills (Grade II*) (1200162)". National Heritage List for England . Retrieved 1 March 2021.
  12. ↑ Ingle 1997, p. 170.
  13. ↑ "Low Mill, Keighley". catalogue.wyjs.org.uk. Retrieved 17 December 2020.
  14. ↑ EOP 2016, p. 54.
  15. ↑ Ingle 1997, p. 169.
  16. ↑ "Heritage at Risk Register, Yorkshire" (PDF). historicengland.org.uk. p. 87. Retrieved 1 March 2021.
  17. ↑ Mitchinson, James, ed. (1 March 2021). "Heritage crime as waterway concreted over at mill". The Yorkshire Post. p. 10. ISSN   0963-1496.

Sources

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.