Company type | Aktiengesellschaft |
---|---|
FWB: M5Z | |
Industry | High-tech engineering |
Founded | 1987 |
Headquarters | Reutlingen, Germany |
Key people | Dr. Ulrich Brahms (CEO), Heiko Aurenz (Chairman of the supervisory board), Dieter Manz (Founder and member of the supervisory board) |
Products | Integrated production lines for displays, touch panels, PCBs, lithium-ion batteries |
Revenue | €249 million (2023) [1] |
€2.9 million (2023) [1] | |
€−2.4 million (2023) [1] | |
Total assets | €278.6 million (end 2023) [1] |
Total equity | €99.7 million (end 2023) [1] |
Number of employees | 1,435 (end 2023) [1] |
Website | www.manz.com |
Manz AG (formerly Manz Automation) is a German multinational engineering company active in the fields of automation, laser processesing, metrology, wet chemistry and roll-to-roll processing. Manz AG bundles its activities into two reporting segments: Mobility & Battery Solutions and Industry Solutions. The focus in the Mobility & Battery Solutions segment is on intelligent production solutions for highly efficient lithium-ion batteries. The Industry Solutions reporting segment is responsible for assembly and production solutions for electronic components and devices, power and consumer electronics, and components for the electric powertrain. [2]
Headquartered in Reutlingen, Baden-Württemberg, the company has additional production centres in Tübingen as well as international manufacturing sites in Hungary, Italy, Slovakia, China and Taiwan. [3] There are additional sales and service branches in the United States, South Korea and India. [4]
Manz had developed a significant presence in the solar photovoltaic industry. Its activities in this sector focused on the development and supply of integrated systems for the production of CIGS thin-film solar modules. [5] In 2010 the company established a partnership with Würth Solar (part of the Würth industrial group) for the exclusive licensing of its CIGS solar cell production technology. [6] After the acquisition of the CIGS modules innovation line of Würth Solar in January 2012, technology licenses were also transferred to the company on an unrestricted basis. [7] In September 2012, Manz presented a CIGS solar module, which was produced on a mass production line and has a 14.6 percent efficiency on total module area and 15.9 percent on aperture area (one in the industry unequaled efficiency). [5] In April 2015, Manz surpassed these numbers again and presented an impressive new efficiency world record for CIGS thin-film solar modules on mass production line with a module efficiency of 16 percent. [8]
The major business areas of Manz are the supply of systems for the production of flat panel displays and touch panels, a market it first entered in 1994, [9] Printed Circuit Boards, [10] electronic devices, such as smartphones, tablet computers and laptops [11] as well as the supply of systems for the production of lithium-ion batteries on an industrial scale for e.g. e-mobility. [12]
The company was founded by Dieter Manz as the GmbH Manz Automatisierungstechnik in 1987. [9] It initially focused on industrial automation and robotics, and today continues to supply automated systems as part of a broader range of products. [13] In October 2001 Manz Automatisierungstechnik merged with ACS GmbH, another firm founded by Dieter Manz, forming Manz Automation AG.
As Manz has grown from an automation specialist into a supplier of integrated production lines, the company changed its name from Manz Automation AG to Manz AG in June 2011. [14]
The company listed on the Frankfurt Stock Exchange in 2006, moving to its Prime Standard market segment in 2008. [15] The company was a constituent of the TecDAX index between September 2008 and March 2009, [16] [17] and again between September 2009 and March 2011. [18] [19] Manz AG shared back in the TecDAX as of March 24, 2014. [20]
In May 2016 Shanghai Electric company took over 19.67% of Manz shares. [21]
In May 2022 Daimler Truck AG acquired a stake in Manz as part of a strategic partnership. [22]
On 1 January 2008, with the acquisition of the company Christian Majer in Tübingen, Germany (machines for packaging and film processing), the basis for entry into the lithium-ion battery market in 2009 was set. Also in 2008, Manz Slovakia was founded and Intech Machines (Taiwanese market leader for wet chemical processes in manufacturing displays) was absorbed. Manz also established a vacuum coating technology development centre (Manz Coating GmbH in Karlstein, Germany) in 2010. [9] In 2012 the establishment of Manz CIGS Technology GmbH in Schwäbisch Hall, Germany and the opening of a new manufacturing facility in Suzhou (China) took place. [9] With the acquisition of the mechanical engineering division of Kemet Electronics Italy (formerly Arcotronics) in 2014, Manz enlarged its technology portfolio in the battery division and founded Manz Italy. In 2015 Manz acquired KLEO, a specialist for laser direct imaging (LDI), from the ZEISS Group. [23]
Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials that exhibit the photovoltaic effect, a phenomenon studied in physics, photochemistry, and electrochemistry. The photovoltaic effect is commercially used for electricity generation and as photosensors.
The TecDAX stock index tracks the performance of the 30 largest German companies from the technology sector. In terms of order book turnover and market capitalization the companies rank below those included in the DAX.
A solar panel is a device that converts sunlight into electricity by using photovoltaic (PV) cells. PV cells are made of materials that produce excited electrons when exposed to light. The electrons flow through a circuit and produce direct current (DC) electricity, which can be used to power various devices or be stored in batteries. Solar panels are also known as solar cell panels, solar electric panels, or PV modules.
Jenoptik AG is a Jena, Germany-based integrated photonics company. The company is listed on the Frankfurt Stock Exchange and is included in the TecDAX stock index.
Nanosolar was a developer of solar power technology. Based in San Jose, CA, Nanosolar developed and briefly commercialized a low-cost printable solar cell manufacturing process. The company started selling thin-film CIGS panels mid-December 2007, and planned to sell them at 99 cents per watt, much below the market at the time. However, prices for solar panels made of crystalline silicon declined significantly during the following years, reducing most of Nanosolar's cost advantage. By February 2013 Nanosolar had laid off 75% of its work force. Nanosolar began auctioning off its equipment in August 2013. Co-Founder of Nanosolar Martin Roscheisen stated on his personal blog that nanosolar "ultimately failed commercially." and that he would not enter this industry again because of slow-development cycle, complex production problems and the impact of cheap Chinese solar power production. Nanosolar ultimately produced less than 50 MW of solar power capacity despite having raised more than $400 million in investment.
MiaSolé is an American solar energy company selling copper indium gallium selenide (CIGS) thin-film photovoltaic products. MiaSolé's manufacturing process lays CIGS on a flexible stainless steel substrate. MiaSolé produces all layers of photovoltaic material in a continuous sputtering process.
Bosch Solar Energy AG was a German solar wafer and solar cell manufacturer, based in Erfurt, which specialized in crystalline silicon-based photovoltaic (PV) products, as well as thin-film modules using amorphous silicon and CIGS absorber materials. The company consisted of various divisions for silicon, wafers, solar cells and modules, research and production facilities in Germany and France and plans were made to open a production line in Malaysia. It has been listed on the German stock exchange since 30 September 2005 and on 19 December 2005 its shares were admitted to the TecDAX. The enterprise was founded in 1997 as ErSol Solarstrom GmbH & Co. KG.
Global Solar Energy is a US-based manufacturer of CIGS solar cells, a thin-film based photovoltaic technology, with manufacturing operations in Tucson, Arizona, United States, and Berlin, Germany. In 2013, it was bought by Chinese renewable energy company Hanergy.
Ascent Solar Technologies, Inc. is a publicly traded photovoltaic (PV) company located in Thornton, Colorado. Its primary product is a flexible CIGS solar cell on a plastic substrate.
Thin-film solar cells are a type of solar cell made by depositing one or more thin layers of photovoltaic material onto a substrate, such as glass, plastic or metal. Thin-film solar cells are typically a few nanometers (nm) to a few microns (μm) thick–much thinner than the wafers used in conventional crystalline silicon (c-Si) based solar cells, which can be up to 200 μm thick. Thin-film solar cells are commercially used in several technologies, including cadmium telluride (CdTe), copper indium gallium diselenide (CIGS), and amorphous thin-film silicon.
Solon SE was a German solar energy company with headquarters in Berlin. Solon SE produced photovoltaic modules at its production sites in Greifswald, Steinach in Tirol, Carmignano di Brenta, Tucson and Berlin. Solon also offered turn-key solar power plants, projected by SOLON Inverstments and Inverters, developed and produced by SOLON Inverters AG.
SMA Solar Technology AG is a German solar energy equipment supplier founded in 1981 and headquartered in Niestetal, Northern Hesse, Germany. SMA is a producer and manufacturer of solar inverters for photovoltaics systems with grid connection, off-grid power supply and backup operations.
Pfeiffer Vacuum Technology AG is a German manufacturer of vacuum pumps. It is headquartered in Aßlar in Germany with 70% of the total production catering to the export market.
A copper indium gallium selenide solar cell is a thin-film solar cell used to convert sunlight into electric power. It is manufactured by depositing a thin layer of copper indium gallium selenide solid solution on glass or plastic backing, along with electrodes on the front and back to collect current. Because the material has a high absorption coefficient and strongly absorbs sunlight, a much thinner film is required than of other semiconductor materials.
Solar Frontier Kabushiki Kaisha is a Japanese photovoltaic company that develops and manufactures thin film solar cells using CIGS technology. It is a fully owned subsidiary of Showa Shell Sekiyu and located in Minato, Tokyo, Japan. The company was founded in 2006 as Showa Shell Solar, and renamed Solar Frontier in April 2010.
Friwo Gerätebau GmbH is a German company, headquartered in Ostbevern, Germany. Its origin can be traced back to 1881. Since the development of the first power supply unit in 1971, the company operates worldwide and manufactures battery chargers, battery packs, power supplies, LED drivers and drive units. The company also provides electronic design and manufacturing services (E²MS) in Europe.
Hanergy Holding Group Ltd. (Hanergy) is a Chinese multinational company headquartered in Beijing. The company is focusing on thin-film solar value chain, including manufacturing and solar parks development. It also owns the Jinanqiao Hydroelectric Power Station and two wind farms. Hanergy is founded and controlled by Li Hejun.
Flisom is a developer and manufacturer of photovoltaic (PV) thin film solar cells located near Zürich, Switzerland, founded in 2005. The company produces high-efficiency CIGS thin film solar modules on flexible plastic foil using proprietary roll-to-roll manufacturing techniques.