Mark Rippetoe | |
---|---|
Born | Wichita Falls, Texas, U.S. | February 12, 1956
Education | Midwestern State University |
Organizations |
|
Notable work |
|
Website | startingstrength |
Mark Rippetoe (born February 12, 1956) [1] is an American strength training coach, author, former powerlifter, and gym owner. [2] [3] [4] He is best known for his barbell training program, the subject of his book Starting Strength: Basic Barbell Training. [5] Rippetoe is known for his brash teaching style and humor, prompting several online compilations of his attributed quotations. [6] [7]
Rippetoe was born in Wichita Falls, Texas, [8] the son of Charles and Judy Rippetoe. [9] [10] Charles, a former U.S. Army paratrooper who parachuted into Normandy in World War II, owned a diner in Wichita Falls. [11] [12] [13] Rippetoe earned a Bachelor of Science degree in petroleum geology from Midwestern State University, where he met his mentor, weightlifter Bill Starr, in 1979. [10] Rippetoe competed in powerlifting from 1979 to 1988, winning the 198-pound class at the Greater Texas Classic in 1981. [14] [10]
Rippetoe bought Anderson's Gym in Wichita Falls in 1984, which he renamed the Wichita Falls Athletic Club. [3] [10] He used the WFAC to test and refine his barbell training program, culminating with the publishing of the first edition of Starting Strength: Basic Barbell Training, co-authored with Lon Kilgore, in 2005. [5] [10] The Starting Strength program focuses on building strength with compound lifts—the squat, deadlift, press, bench press, and power clean—and a limited number of assistance exercises, such as chinups. [15] In collaboration with Glenn Pendlay and Kilgore, Rippetoe also established the USA Weightlifting Regional Development Center in Wichita Falls. [10]
In 1985, Rippetoe was a part of the charter group of individuals to receive the Certified Strength and Conditioning Specialist certification when it was first offered by the National Strength and Conditioning Association. [4] He formally relinquished the credential in 2009. [5] Rippetoe was also formerly associated with the CrossFit community as a subject-matter expert in barbell training. [16] He authored many training articles for the CrossFit Journal and created, with Lon Kilgore, the Basic Barbell Certification course, which they conducted from 2006 to 2009. [17] [18] After he ended his formal association with CrossFit in 2009, he expanded this course into a three-day Starting Strength Seminar produced through the Aasgaard Company. [17] [19] [20]
Beginning in 2018, the Aasgaard Company established a national franchise gym chain of Starting Strength branded gyms which feature the use of basic barbell equipment and the Starting Strength method. [21]
Rippetoe has authored several books, peer-reviewed articles, online and DVD instructional videos, and internet posts concerned with strength training. [3]
Powerlifting is a strength sport that consists of three attempts at maximal weight on three lifts: squat, bench press, and deadlift. As in the sport of Olympic weightlifting, it involves the athlete attempting a maximal weight single-lift effort of a barbell loaded with weight plates. Powerlifting evolved from a sport known as "odd lifts", which followed the same three-attempt format but used a wider variety of events, akin to strongman competition. Eventually, odd lifts became standardized to the current three.
A barbell is a piece of exercise equipment used in weight training, bodybuilding, weightlifting, powerlifting and strongman, consisting of a long bar, usually with weights attached at each end.
The Smith machine is a weight machine used for weight training. It consists of a barbell that is fixed within steel rails allowing only vertical or near-vertical movement. Some Smith machines have the barbell counterbalanced. The machine can be used for a wide variety of exercises though it is most commonly used to perform "Smith machine squats".
A squat is a strength exercise in which the trainee lowers their hips from a standing position and then stands back up. During the descent, the hip and knee joints flex while the ankle joint dorsiflexes; conversely the hip and knee joints extend and the ankle joint plantarflexes when standing up. Squats also help the hip muscles.
The deadlift is a weight training exercise in which a loaded barbell or bar is lifted off the ground to the level of the hips, torso perpendicular to the floor, before being placed back on the ground. It is one of the three powerlifting exercises, along with the squat and bench press, as well as a frequent lift in strongman.
Strongman is someone who exhibits strength through strength athletics. Strength athletics, also known as strongman competitions, are composed of a variety of events in which competitors have to move the highest weights possible, the winner being the one having the highest tally across all events. In the 19th century, the term strongman referred to an exhibitor of strength or similar circus performers who performed feats of strength.
In weight training, a kettlebell is a cast-iron or cast-steel ball with a handle attached to the top. It is used to perform many types of exercises, including ballistic exercises that combine cardiovascular, strength and flexibility training. Kettlebells are the primary equipment used in the weight-lifting sport of kettlebell lifting.
The good-morning is a weight training exercise. It is known as a good morning because of the movement in the erector spinae which resembles the bow that traditionally begins a schoolday in some East-Asian countries. The erector spinae muscles of the lower back work isometrically to keep the spine in an extended position while the hamstrings and gluteus maximus work isotonically to perform hip extension. Other muscles are involved in stabilizing weight on the back and maintaining balance.
Exercise equipment is any apparatus or device used during physical activity to enhance the strength or conditioning effects of that exercise by providing either fixed or adjustable amounts of resistance, or to otherwise enhance the experience or outcome of an exercise routine.
In weight training, training to failure is repeating an exercise to the point of momentary muscular failure, i.e. the point where the neuromuscular system can no longer produce adequate force to overcome a specific workload. Two systematic reviews published in 2021 found no benefit to training to failure on hypertrophy, while one of the reviews found some evidence that not-to-failure training is superior for strength.
The clean and press is a two-part weight training exercise whereby a loaded barbell is lifted from the floor to the shoulders and pushed overhead. The lift was a component of the sport of Olympic weightlifting from 1928 to 1972, but was removed due to difficulties in judging proper technique.
Spotting in weight or resistance training is the act of supporting another person during a particular exercise, with an emphasis on allowing the participant to lift or push more than they could normally do safely. Correct spotting involves knowing when to intervene and assist with a lift, and encouraging a training partner to push beyond the point in which they would normally 'rack' the weight.
The following outline is provided as an overview of and topical guide to exercise:
The overhead press, also known as the shoulder press, strict press or military press, is an upper-body weight training exercise in which the trainee presses a weight overhead while seated or standing. It is mainly used to develop the anterior deltoid muscles of the shoulder. The standing version was once a component of the sport of Olympic weightlifting as part of the clean and press movement, but was removed in 1972 due to difficulties in judging proper technique.
CrossFit is a branded fitness regime that involves constantly varied functional movements performed at high intensity. The method was developed by Greg Glassman, who founded CrossFit with Lauren Jenai in 2000, with CrossFit its registered trademark. The company forms what has been described as the biggest fitness chain in the world, with around 12,000 affiliated gyms in over 150 countries as of 2022, under half of which are located in the United States.
Weightlifting or weight lifting generally refers to physical exercises and sports in which people lift weights, often in the form of dumbbells or barbells. People engage in weightlifting for a variety of different reasons. These can include: developing physical strength; promoting health and fitness; competing in weightlifting sports; and developing a muscular and aesthetic physique.
Louie Simmons was an American powerlifter and strength coach. He was active as a powerlifter and coach for more than fifty years. Simmons was the founder of Westside Barbell and has developed several training protocols, including the "Conjugate Method". He is also credited with inventing training machines for reverse hyper-extensions and belt squats. In the US powerlifting community he was referred to as the "Godfather of powerlifting".
Mathew Edward Fraser is a retired Canadian-American professional CrossFit athlete, competing from 2014 to 2020. Fraser is the first athlete to have won five CrossFit Games titles, winning the 2016, 2017, 2018, 2019, and 2020 CrossFit Games consecutively. He is widely considered to be the most dominant and successful individual male athlete in the sport of CrossFit.
Rogue Fitness is an American manufacturer and distributor of gym equipment based in Columbus, Ohio. It produces strength and conditioning equipment such as weightlifting barbells, plates and racks, kettlebells, as well as a range of fitness related equipment for CrossFit boxes, home gyms, military, collegiate, and professional sports teams.
A weight plate is a flat, heavy object, usually made of cast iron, that is used in combination with barbells or dumbbells to produce a bar with a desired total weight for the purpose of physical exercise.
I'm from Wichita Falls...I was born there.
Mark Rippetoe won first place at the 198-pound class...a total of 1514 (573 squat; 341 bench press and 600 deadlift.)
{{cite web}}
: CS1 maint: multiple names: authors list (link)