Market Street Bridge (Ohio River)

Last updated
Market Street Bridge
Ohio - Steubenville 2.jpg
MSB at night
Coordinates 40°21′28″N80°36′29″W / 40.35778°N 80.60806°W / 40.35778; -80.60806
Crosses Ohio River
Preceded by Steubenville Railroad Bridge
Followed by Wheeling-Pittsburgh Steel Railroad Bridge
Characteristics
Design Suspension bridge
MaterialSteel
Total length1,794 feet (547 m)
Width20.7 feet (6.3 m)
Longest span680 feet (210 m)
No. of spans3
History
DesignerE. K. Morse
Constructed byOhio Steel Erection Company
Fabrication by Jones and Laughlin Steel Company, Bethlehem Steel
Market Street Bridge
LocationWV 2 spur, mile post 0.01 / Market St., vicinity of Follansbee, West Virginia
NRHP reference No. 100003517 [1]
Added to NRHPMarch 21, 2019
Location
Market Street Bridge (Ohio River)

The Market Street Bridge is a suspension bridge connecting Market Street in Steubenville, Ohio and West Virginia Route 2 in Follansbee, West Virginia over the Ohio River. As a project of the Steubenville Bridge Company, it was constructed in 1905 by the Ohio Steel Erection Company, the framework was created by the Penn Bridge Company, and the original steel was done by Jones and Laughlin Steel Company and Bethlehem Steel. The bridge spans a length of 1,794 feet (547 m) with a width of 20.7 feet (6.3 m). As of 2002, the average daily traffic was estimated around 15,000 vehicles. [2] It was listed on the National Register of Historic Places in 2019.

Contents

History

The bridge was designed by E.K. Morse, who worked for numerous Pittsburgh steel companies and organized the Pittsburgh Flood Commission. Morse designed many bridges located over rivers including the Allegheny, Monongahela, Niagara, and Kentucky. He also worked with the Roeblings on the design of the famous Brooklyn Bridge in New York City. Morse is also known on an international level as the designer of the Hawkesbury River Railway Bridge in Australia constructed in 1887. Morse died in 1942. [3]

The Market Street Bridge, which was at one time known as the Steubenville Bridge, was the result of a project of the Steubenville Bridge Company. This company is believed to have been created with the sole purpose of creating the Market Street Bridge. It is rumored that Steubenville businessman Dohrman Sinclair had an agreement with the Follansbee Brothers of West Virginia that if the Market Street Bridge was erected, than the Brothers would create a steel mill on the farm lands of the West Virginia side located less than 1 mile (1.6 km) from the construction site of the bridge. This mill would become known as Wheeling Pittsburgh Steel Coke Works, which is now known as Mountain State Carbon. The mill would benefit from the construction of the bridge, as workers would easily commute to work utilizing the bridge. The Mill has also played an important role in the local economy. [3] Upon its opening to foot traffic on July 2, 1905, the Market Street Bridge was sufficient and successful. Two weeks later, the Bridge opened to vehicular traffic as it awaited for repairs to the connecting road on the West Virginia side. [4]

The first two customers at the toll booth were William M. Helms, a local insurance agent, and John J. Dillon, the manager of Altamont park. They both bought their tickets for 5 cents each and were able to cross as pedestrians. The first vehicle to cross the Bridge was that of E.W. Cooper, the superintendent of construction, and his wife. The bridge was constructed to accommodate streetcars and other motor vehicles. In fact, the bridge originally had wood-based floors around the streetcar tracks. However, this caused numerous fires and developers were forced to lay pavement over the wood. In 1917, the Steubenville Bridge Company sold the bridge for an unknown price to the owners of the streetcar line, the West Penn Traction Company. [4]

In 1922, The Market Street Bridge experienced a major cable failure after damaged caused by heavy freight cars crossing the bridge. The West Penn Traction Company called upon the services of Dr. David B. Steinman, a structural engineer and major bridge developer from New York City. Steinman was a renowned American Bridge Company developer and was most famous for the Mackinac Bridge in Michigan. [3] After meeting with the original designer E.K. Morse in Pittsburgh, Steinman arrived in Steubenville and began climbing the towers of the bridge to get a better look at the broken cables. Misunderstanding his intentions, observers panicked for fear that Steinman was suicidal. [4] He designed improvements including the incorporation of the open deck design for the Market Street Bridge. The repairs which began in the same year as the failure increased the carrying capacity and weight limit of the bridge. [3] Steinman may have fully repaired the bridge, but paid the price in his career after being kicked out of the American Institute of Consulting Engineers. Steinman had upset Morse after finding his original design to be flawed and unsafe. However, Steinman did further work on the bridge in the 1940s, putting new braces on the towers, new stiffening trusses, and replacing the wood-based roadway. [4]

In 1928, the Fort Steuben Bridge (another suspension bridge), also known as the Stanton Bridge, was constructed less than 1 mile (1.6 km) away from the Market Street Bridge. The Fort Steuben Bridge connected Ohio State Route 7 in Steubenville and U.S. Route 22 (US 22) in Weirton, West Virginia. Due to a bad inspection in 2007, the Ohio Department of Transportation decided to condemn the bridge. Even though many thought the bridge should have been saved due to its historical significance, It was demolished in 2012. [5]

In 1941, after three years of negotiations, the Market Street Bridge was purchased by the State of West Virginia for $1.3 million. The purchase was ironic due to the opposition from those in Wheeling, West Virginia who thought the Market Street Bridge threatened the industry and the trade taking place between Wheeling and areas to the southwest. Upon this purchase, different repairs occurred to the towers of the bridge. In the early 1940s, the streetcar industry began to decline due to the advancements in vehicular technology and a complete replacement of the bridge deck to make it more adequate for vehicular traffic took place. In fact, many streetcar companies found it more profitable to become electrical supply companies. With these repairs, the state of West Virginia initiated tolls to pay for $400,000 in repairs. Five tickets to cross the bridge could be purchased for 40 cents. [4] The tolls were removed ahead of time in 1953 when the bridge repair expenses were satisfied. [3]

A new steel grid deck was installed in 1953 and then replaced in 1981. The pedestrian walkway was repaired in 1956 and the bridge was repainted in 1982. [3]

In 1990, the Veterans Memorial Bridge, which many call the "wishbone" bridge because of its shape, was constructed carrying 6 lanes of US 22 from Steubenville through Weirton. Unlike the metal suspension structures of the Market Street Bridge and the Fort Steuben Bridge, the cable-stayed Veterans Memorial Bridge uses the strength of metal and concrete with 26 cables attached to the tower. However, the bridge has had a few structural problems over the years. [6]

An inspection of the Market Street Bridge in 2005 rated the condition of the superstructure and substructure in serious condition and deemed the bridge structurally deficient even with a good rating of the deck. [7] The West Virginia Department of Transportation (WVDOT) planned repairs to the bridge which began in 2009, including structural repairs to the truss and the towers and also the enforcement of the carrying capacity. Work that began in 2010, awarded to Ahern & Associates in a $16,547 contract, included the installation of period lights along the outside cables of the bridge and a new paint and color scheme. Officials actually polled the visitors of the website for the West Virginia Department of Transportation to pick the color scheme. After a landslide vote of 14,543, dark blue paint on the towers and the cables and dust yellow on the truss were incorporated. The bridge was reopened in a public ceremony on December 7, 2011, on the West Virginia side of the Bridge. In attendance was Governor Earl Ray Tomblin and West Virginia Transportation Secretary Paul Mattox. [8]

The West Virginia Department of Transportation has deemed the Market Street Bridge eligible for inclusion on the National Register of Historic Places, due to its historic design and construction methods. [8]

The Market Street Bridge was not the first bridge that crossed the Ohio River in Steubenville. The First Panhandle Bridge owned by the Pennsylvania Railroad was constructed in 1857 and was used primarily as a railroad bridge. [3]

On December 21, 2023, the Market Street Bridge was closed to pedestrians and vehicular traffic. This came after the WVDOT began closely monitoring the bridge's cable suspension system and performing inspections every 3 months. During the inspection 3 months prior to the bridge's closure, its weight limit was decreased from 5 tons to 3 tons. [9]



Architecture

The Market Street Bridge is a steel suspension bridge that spans 1,794 feet (547 m) and has a width of 22 feet (6.7 m). The three main spans of the bridge (two are deck girder spans and the other is a five-span steel deck) are cable suspended with a stiffening through Warren truss. The main span length is 680 feet (210 m). The square, "box-like" steel truss, which encases the driving deck, is called quadrangular Warren. The bridge cables are attached to two steel towers which stretch 210 feet (64 m) above the stone piers. These stone piers along with concrete stub abutments and steel bents make up the substructure. The vertical clearance of the deck is exactly 11 feet (3.4 m) and the bridge is estimated to suspend 75 feet (23 m) above the water. [2] The original design of the bridge contained decorative finials placed on top of the towers and elaborate cresting on the towers and portals. These were removed during the numerous rehabilitations the bridge experienced. The exact date and reason for the removal is unknown. A few citizens pushed for the reinstatement of these ornate elements during recent renovations. [3]

See also

Related Research Articles

<span class="mw-page-title-main">Tacoma Narrows Bridge (1940)</span> Suspension bridge in Washington, US, collapsed in 1940

The 1940 Tacoma Narrows Bridge, the first bridge at this location, was a suspension bridge in the U.S. state of Washington that spanned the Tacoma Narrows strait of Puget Sound between Tacoma and the Kitsap Peninsula. It opened to traffic on July 1, 1940, and dramatically collapsed into Puget Sound on November 7 of the same year. The bridge's collapse has been described as "spectacular" and in subsequent decades "has attracted the attention of engineers, physicists, and mathematicians". Throughout its short existence, it was the world's third-longest suspension bridge by main span, behind the Golden Gate Bridge and the George Washington Bridge.

<span class="mw-page-title-main">Steel Bridge</span> Bridge in Portland, Oregon

The Steel Bridge is a through truss, double-deck vertical-lift bridge across the Willamette River in Portland, Oregon, United States, opened in 1912. Its lower deck carries railroad and bicycle/pedestrian traffic, while the upper deck carries road traffic, and light rail (MAX), making the bridge one of the most multimodal in the world. It is the only double-deck bridge with independent lifts in the world and the second oldest vertical-lift bridge in North America, after the nearby Hawthorne Bridge. The bridge links the Rose Quarter and Lloyd District in the east to Old Town Chinatown neighborhood in the west.

<span class="mw-page-title-main">Manhattan Bridge</span> Bridge in New York City

The Manhattan Bridge is a suspension bridge that crosses the East River in New York City, connecting Lower Manhattan at Canal Street with Downtown Brooklyn at the Flatbush Avenue Extension. Designed by Leon Moisseiff and built by the Phoenix Bridge Company, the bridge has a total length of 6,855 ft (2,089 m). It is one of four toll-free vehicular bridges connecting Manhattan Island to Long Island; the nearby Brooklyn Bridge is just slightly farther west, while the Queensboro and Williamsburg bridges are to the north.

<span class="mw-page-title-main">John A. Roebling Suspension Bridge</span> Suspension bridge between the Ohio River

The John A. Roebling Suspension Bridge is a suspension bridge that spans the Ohio River between Cincinnati, Ohio, and Covington, Kentucky. When opened on December 1, 1866, it was the longest suspension bridge in the world at 1,057 feet (322 m) main span, which was later overtaken by John A. Roebling's most famous design of the 1883 Brooklyn Bridge at 1,595.5 feet (486.3 m). Pedestrians use the bridge to get between the hotels, bars, restaurants, and parking lots in Northern Kentucky. The bar and restaurant district at the foot of the bridge on the Kentucky side is known as Roebling Point.

<span class="mw-page-title-main">Williamsburg Bridge</span> Bridge in New York City

The Williamsburg Bridge is a suspension bridge across the East River in New York City, connecting the Lower East Side of Manhattan with the Williamsburg neighborhood of Brooklyn. Originally known as the East River Bridge, the Williamsburg Bridge was completed in 1903 and, at 7,308 feet (2,227 m) long, was the longest suspension bridge span in the world until 1924.

<span class="mw-page-title-main">Truss bridge</span> Bridge whose load-bearing superstructure is composed of a truss

A truss bridge is a bridge whose load-bearing superstructure is composed of a truss, a structure of connected elements, usually forming triangular units. The connected elements, typically straight, may be stressed from tension, compression, or sometimes both in response to dynamic loads. There are several types of truss bridges, including some with simple designs that were among the first bridges designed in the 19th and early 20th centuries. A truss bridge is economical to construct primarily because it uses materials efficiently.

<span class="mw-page-title-main">Wheeling Suspension Bridge</span> Bridge in West Virginia, United States

The Wheeling Suspension Bridge is a suspension bridge spanning the main channel of the Ohio River at Wheeling, West Virginia. It was the largest suspension bridge in the world from 1849 until 1851. Charles Ellet Jr. designed it and supervised construction of what became the first bridge to span a major river west of the Appalachian mountains. It linked the eastern and western section of the National Road, and became especially strategically important during the American Civil War. Litigation in the United States Supreme Court concerning its obstruction of the new high steamboat smokestacks eventually cleared the way for other bridges, especially needed by expanding railroads. Because this bridge was designed during the horse-and-buggy era, 2-ton weight limits and vehicle separation requirements applied in later years until it was closed to automobile traffic in September 2019.

<span class="mw-page-title-main">Key Bridge (Washington, D.C.)</span> Bridge in Washington, D.C., and Virginia, U.S.

The Francis Scott Key Bridge, more commonly known as the Key Bridge, is a six-lane reinforced concrete arch bridge carrying U.S. Route 29 (US 29) across the Potomac River between the Rosslyn neighborhood of Arlington County, Virginia, and the Georgetown neighborhood of Washington, D.C. Completed in 1923, it is Washington's oldest surviving road bridge across the Potomac River.

<span class="mw-page-title-main">Eastern span replacement of the San Francisco–Oakland Bay Bridge</span> Seismic stabilization megaproject in California (2002–2013)

The eastern span replacement of the San Francisco–Oakland Bay Bridge was a construction project to replace a seismically unsound portion of the Bay Bridge with a new self-anchored suspension bridge (SAS) and a pair of viaducts. The bridge is in the U.S. state of California and crosses the San Francisco Bay between Yerba Buena Island and Oakland. The span replacement took place between 2002 and 2013, and is the most expensive public works project in California history, with a final price tag of $6.5 billion, a 2,500% increase from the original estimate of $250 million, which was an initial estimate for a seismic retrofit of the span, not the full span replacement ultimately completed. Originally scheduled to open in 2007, several problems delayed the opening until September 2, 2013. With a width of 258.33 ft (78.74 m), comprising 10 general-purpose lanes, it is the world's widest bridge according to Guinness World Records.

<span class="mw-page-title-main">Roberto Clemente Bridge</span> Bridge in Pittsburgh, Pennsylvania, United States

The Roberto Clemente Bridge, also known as the Sixth Street Bridge, spans the Allegheny River in downtown Pittsburgh, Pennsylvania, United States.

<span class="mw-page-title-main">Waldo–Hancock Bridge</span> Bridge in Bucksport, Maine

The Waldo–Hancock Bridge was the first long-span suspension bridge erected in Maine, as well as the first permanent bridge across the Penobscot River downstream from Bangor. The name comes from connecting Waldo and Hancock counties. The bridge was built in 1931 and retired in 2006, when the new Penobscot Narrows Bridge was opened just a few yards away, and it was demolished in 2013.

<span class="mw-page-title-main">Coraopolis Bridge</span> Bridge in Coraopolis, Pennsylvania

The Coraopolis Bridge[1] is a girder bridge over the back channel of the Ohio River connecting Grand Avenue on Neville Island to Ferree Street in Coraopolis, Pennsylvania. It opened in 1995 to replace a structure of historic significance. The original Pratt/Bowstring/Pennsylvania[2] through truss spans, designed by Theodore Cooper, were formerly the (third) Sixth Street Bridge, spanning the Allegheny River, in downtown Pittsburgh, and were built in 1892 by the Union Bridge Company. They were floated downstream by the Foundation Company in 1927 rather than being demolished when the bridge was removed to enable construction of the present (fourth) Three Sisters (Pittsburgh) Sixth Street Self-anchored suspension bridge. However, by the late 1980s, the old bridge could no longer support traffic volumes and was replaced by a newer structure.

<span class="mw-page-title-main">U.S. Grant Bridge</span> Bridge in Ohio and South Portsmouth, Kentucky

The U.S. Grant Bridge is the name of the two bridges that carry and have carried traffic on U.S. Route 23 between Portsmouth, Ohio and South Portsmouth, Kentucky across the Ohio River in the United States. The original suspension bridge was closed and demolished in 2001 and the replacement cable-stayed bridge opened on October 16, 2006.

<span class="mw-page-title-main">Bellaire Bridge</span> Bridge

The Bellaire Bridge or Interstate Bridge is a privately owned, closed cantilever truss toll bridge that spans the Ohio River between Benwood, West Virginia and Bellaire, Ohio. It provided a link for commuters between southern Ohio border towns and West Virginia steel mills from 1926 to 1991.

The Military Order of the Purple Heart Bridge, named after the Military Order of the Purple Heart, carries U.S. Route 40 and US 250 over the Ohio River back channel between Wheeling Island, West Virginia and Bridgeport, Ohio. Construction began in 1995 and finished in 1998.

<span class="mw-page-title-main">Fort Henry Bridge</span> Bridge crossing the Ohio River in West Virginia

The Fort Henry Bridge is a crossing of the Ohio River main channel in Wheeling, West Virginia. The tied-arch bridge carries two lanes in each direction of Interstate 70 (I-70), U.S. Route 40 (US 40), and US 250. The bridge opened after four years of construction work on September 8, 1955, costing $6.8 million, $1.8 million over budget. The bridge, along with the aging Wheeling Suspension Bridge, are the only two road links from Wheeling Island to downtown Wheeling, although this is the only one that allows vehicular traffic. In 2009, the structure carried an average of over 60,000 vehicles per day.

<span class="mw-page-title-main">Parkersburg Bridge (CSX)</span> Bridge in Parkersburg, West Virginia

The Parkersburg Bridge crosses the Ohio River between Parkersburg, West Virginia, and Belpre, Ohio. Designed by Jacob Linville, the bridge has 46 spans: 25 deck plate girder, 14 deck truss, 6 through truss, and 1 through plate girder. 50,000 cubic yards (38,000 m3) of stone were used for the 53 piers. The bridge was constructed from May 1869 to January 1871 by the Baltimore and Ohio Railroad. At the time of its completion, the bridge was reportedly the longest in the world at 7,140 feet (2,180 m).

<span class="mw-page-title-main">Tacoma Narrows Bridge (1950)</span> Suspension bridge in Washington State

The 1950 Tacoma Narrows Bridge is a suspension bridge in the U.S. state of Washington that carries the westbound lanes of Washington State Route 16 across the Tacoma Narrows strait, between the city of Tacoma and the Kitsap Peninsula. Opened on October 14, 1950, it was built in the same location as the original Tacoma Narrows Bridge, which collapsed due to a windstorm on November 7, 1940. It is the older of the twin bridges that make up the Tacoma Narrows Bridge crossing of the Tacoma Narrows, and carried both directions of traffic across the strait until 2007. At the time of its construction, the bridge was, like its predecessor, the third-longest suspension bridge in the world in terms of main span length, behind the Golden Gate Bridge and George Washington Bridge; it is now the 46th longest suspension bridge in the world.

<span class="mw-page-title-main">Fort Steuben Bridge</span> Suspension bridge over the Ohio River

The Fort Steuben Bridge, originally the Weirton-Steubenville Bridge, was a suspension bridge which spanned the Ohio River from Steubenville, Ohio to Weirton, West Virginia and carried U.S. Route 22 and then Ohio State Route 822 during its existence. Completed in 1928 and opened as a toll bridge, the Fort Steuben Bridge was a more direct route for the flow of traffic across the river; particularly for trucks and heavy vehicles from the industrial area. The Fort Steuben Bridge was weight-restricted in 2006 and closed in 2009 due to deterioration. The bridge was demolished by Joseph B. Fay Co. on February 21, 2012.

<span class="mw-page-title-main">Charles Anderson Memorial Bridge</span> Bridge in Pittsburgh

The Charles Anderson Memorial Bridge is a steel deck truss bridge located in Pittsburgh, Pennsylvania, United States. The bridge carries the four-lane roadway of Boulevard of the Allies across a ravine known as Junction Hollow, connecting the neighborhoods of Central Oakland and South Oakland with Schenley Park. The bridge also spans the Junction Hollow Trail and P&W Subdivision railroad tracks which run along the bottom of the valley.

References

  1. "Weekly List of Actions Taken on Properties: 3/18/219 through 3/22/2019". National Park Service. March 22, 2019. Retrieved March 28, 2019.
  2. 1 2 "Historicbridges.org". Market Street Bridge
  3. 1 2 3 4 5 6 7 8 "A Short History of the Steubenville Bridge" (PDF). Mike and Judy Lohr November 2010
  4. 1 2 3 4 5 "The Public Library of Steubenville and Jefferson County". Market Street Bridge by Director Allen Hall
  5. "Fort Steuben Bridge". historicbridges.org
  6. "Veterans Memorial Bridge". WV Department of Transportation
  7. "Marjet Street Bridge". Bridgehunter.com
  8. 1 2 "WVDOT Plans Major Maintenance". Archived from the original on 2016-03-04. WV Department of Transportation
  9. "WVDOT: Market Street Bridge connecting WV 2 and Steubenville, Ohio to close to pedestrian and vehicular traffic starting today". transportation.wv.gov. Retrieved 2024-05-22.