Millrind

Last updated
A bedstone and the rind Bedandrind.jpg
A bedstone and the rind

A millrind or simply rind is an iron support, usually four-armed or cross-shaped, for the upper ("runner") stone in a pair of millstones.

Contents

The rind is affixed to the top of the square-section main shaft or spindle and supports the entire weight of the runner stone, which can be as much as several tons. The face of a runner stone usually has a carved depression, called the "Spanish cross", to accommodate the millrind. The rind is necessary because the grain is fed through the runner stone's central hole, so the spindle cannot be inserted through it like a cartwheel on an axle.

Mechanism

A later refinement, replacing the cross, was to mount a mace onto the spindle, which fitted into a gimbal let into the runner stone. The device allowed the runner stone to move in two planes and thus follow the nether (stationary) stone more closely, but great care had to be taken to ensure that its weight was properly balanced. The separation of the nether stone from the runner, controlling the fineness of the grind, was adjusted by the tenter mechanism: a screw jack to raise or lower the bearing carrying the base of spindle. [1]

In heraldry

The millrind occasionally appears as a charge in heraldry, in which it is often known by the French name fer-de-moline ("iron of a mill"). Like real millrinds, the fer-de-moline is highly variable in form. [2] The 16th century writer Bossewell characterized it as a symbol fit for judges and magistrates, who keep men on a straight course just as a millrind does with a runner stone. [3] However it is more often found in canting arms of families with names such as Miller, Milne [3] and Mills and Turner, Turnor and Turnour.

Another charge based on the millrind is the cross moline, which takes the form of a cross with bifurcated ends (sometimes with a pierced centre and sometimes without). In early blazons the term fer-de-moline often refers to the cross moline. [4]

Related Research Articles

<span class="mw-page-title-main">Watermill</span> Structure that uses a water wheel or turbine

A watermill or water mill is a mill that uses hydropower. It is a structure that uses a water wheel or water turbine to drive a mechanical process such as milling (grinding), rolling, or hammering. Such processes are needed in the production of many material goods, including flour, lumber, paper, textiles, and many metal products. These watermills may comprise gristmills, sawmills, paper mills, textile mills, hammermills, trip hammering mills, rolling mills, wire drawing mills.

<span class="mw-page-title-main">Millstone</span> Stones used in gristmills, for grinding wheat or other grains

Millstones or mill stones are stones used in gristmills, used for triturating, crushing or, more specifically, grinding wheat or other grains. They are sometimes referred to as grindstones or grinding stones.

<span class="mw-page-title-main">Saltire</span> Heraldic and vexillogical symbol in the form of a diagonal cross

A saltire, also called Saint Andrew's Cross or the crux decussata, is a heraldic symbol in the form of a diagonal cross. The word comes from the Middle French sautoir, Medieval Latin saltatoria ("stirrup").

<span class="mw-page-title-main">Tincture (heraldry)</span> Metal, colour, or fur used in heraldic design

Tincture is the limited palette of colours and patterns used in heraldry. The need to define, depict, and correctly blazon the various tinctures is one of the most important aspects of heraldic art and design.

<span class="mw-page-title-main">Ordinary (heraldry)</span> Basic geometric charge in heraldry

In heraldry, an ordinary is one of the two main types of charges, beside the mobile charges. An ordinary is a simple geometrical figure, bounded by straight lines and running from side to side or top to bottom of the shield. There are also some geometric charges known as subordinaries, which have been given lesser status by some heraldic writers, though most have been in use as long as the traditional ordinaries. Diminutives of ordinaries and some subordinaries are charges of the same shape, though thinner. Most of the ordinaries are theoretically said to occupy one-third of the shield; but this is rarely observed in practice, except when the ordinary is the only charge.

<span class="mw-page-title-main">Charge (heraldry)</span> Heraldic motif; an ordinary or mobile charge (or symbol) in a field

In heraldry, a charge is any emblem or device occupying the field of an escutcheon (shield). That may be a geometric design or a symbolic representation of a person, animal, plant, object, building, or other device. In French blazon, the ordinaries are called pièces, and other charges are called meubles.

<span class="mw-page-title-main">Quern-stone</span> Stone tools for hand–grinding

Quern-stones are stone tools for hand-grinding a wide variety of materials, especially for various types of grains. They are used in pairs. The lower stationary stone of early examples is called a saddle quern, while the upper mobile stone is called a muller, rubber, or handstone. The upper stone was moved in a back-and-forth motion across the saddle quern. Later querns are known as rotary querns. The central hole of a rotary quern is called the eye, and a dish in the upper surface is known as the hopper. A handle slot contained a handle which enabled the rotary quern to be rotated. They were first used in the Neolithic era to grind cereals into flour.

<span class="mw-page-title-main">Canting arms</span> Heraldric symbols representing the name of their owner, either literally or as a visual pun

Canting arms are heraldic bearings that represent the bearer's name in a visual pun or rebus.

<span class="mw-page-title-main">Label (heraldry)</span>

In heraldry, a label is a charge resembling the strap crossing the horse's chest from which pendants are hung. It is usually a mark of difference, but has sometimes been borne simply as a charge in its own right.

<span class="mw-page-title-main">Fimbriation</span> Small stripe of colour around common charges or ordinaries, in heraldry and vexillology

In heraldry and vexillology, fimbriation is the placement of small stripes of contrasting colour around common charges or ordinaries, usually in order for them to stand out from the background, but often simply due to the designer's subjective aesthetic preferences, or for a more technical reason to avoid what would otherwise be a violation of the rule of tincture. While fimbriation almost invariably applies to both or all sides of a charge, there are very unusual examples of fimbriation on one side only. Another rather rare form is double fimbriation, where the charge or ordinary is accompanied by two stripes of colour instead of only one. In cases of double fimbriation the outer colour is blazoned first. The municipal flag of Mozirje, in Slovenia, show an example of fimbriation that itself is fimbriated.

<span class="mw-page-title-main">Rule of tincture</span> Rule of color composition in heraldic design

The rule of tincture is a design philosophy found in some heraldic traditions that states "metal should not be put on metal, nor colour on colour". Heraldic furs such as ermine and vair, and charges described as "proper", are generally exempt from the rule of tincture.

<span class="mw-page-title-main">Rose (heraldry)</span> Heraldic symbol

The rose is a common device in heraldry. It is often used both as a charge on a coat of arms and by itself as an heraldic badge. The heraldic rose has a stylized form consisting of five symmetrical lobes, five barbs, and a circular seed. The rose is one of the most common plant symbols in heraldry, together with the lily, which also has a stylistic representation in the fleur-de-lis.

<span class="mw-page-title-main">Cross moline</span> Heraldic cross with bifurcated curved tips

The cross moline is a Christian cross, constituting a kind of heraldic cross.

<span class="mw-page-title-main">Bordure</span> Heraldic ordinary or subordinary

In heraldry, a bordure is a band of contrasting tincture forming a border around the edge of a shield, traditionally one-sixth as wide as the shield itself. It is sometimes reckoned as an ordinary and sometimes as a subordinary.

<span class="mw-page-title-main">Blazon</span> Art of describing heraldic arms in proper terms

In heraldry and heraldic vexillology, a blazon is a formal description of a coat of arms, flag or similar emblem, from which the reader can reconstruct the appropriate image. The verb to blazon means to create such a description. The visual depiction of a coat of arms or flag has traditionally had considerable latitude in design, but a verbal blazon specifies the essentially distinctive elements. A coat of arms or flag is therefore primarily defined not by a picture but rather by the wording of its blazon. Blazon is also the specialized language in which a blazon is written, and, as a verb, the act of writing such a description. Blazonry is the art, craft or practice of creating a blazon. The language employed in blazonry has its own vocabulary, grammar and syntax, which becomes essential for comprehension when blazoning a complex coat of arms.

<span class="mw-page-title-main">Shiremark Mill, Capel</span> Windmill in Surrey, England

Shiremark Mill, also known as Kingsfold Mill or Capel Mill was a listed Smock mill at Capel, Surrey, England, which was burnt down in 1972.

<span class="mw-page-title-main">Boars in heraldry</span> Heraldic animal

The wild boar and boar's head are common charges in heraldry.

<span class="mw-page-title-main">South Ockendon Windmill</span>

South Ockendon Windmill was a Smock mill at South Ockendon, Essex, England which collapsed on 2 November 1977.

<span class="mw-page-title-main">Gristmill</span> Apparatus that grinds grain into flour

A gristmill grinds cereal grain into flour and middlings. The term can refer to either the grinding mechanism or the building that holds it. Grist is grain that has been separated from its chaff in preparation for grinding.

Millwheel or water wheel are sometimes used as a charge in heraldic arms. The water wheel is often used to symbolize the food processing industry or industry in general.

References

  1. Wood, Geoff (2003). Thorrington Tide Mill. Essex County Council. pp. 14–17. ISBN   185281-232-X.
  2. Fox-Davies, Charles (1909). "A Complete Guide to Heraldry". T.C. and E.C. Jack. p. 293.
  3. 1 2 Nisbet, Alexander (1816). A System of Heraldry. p. 115.
  4. Parker, James (1894). "A Glossary of Terms Used in Heraldry". Heraldsnet.