Motor landing craft

Last updated

Motorlandingcraft 1942.jpg
Motor landing craft prints from 1942
Class overview
NameMotor landing craft
BuildersJ. Samuel White of Cowes
OperatorsNaval Ensign of the United Kingdom.svg  Royal Navy
Preceded byLighters and Horse Boats
Succeeded by LCM (1)
Built1926–1938
Completed9
Lostall (1939–1945)
General characteristics
TypeLanding craft
Displacement20 long tons (20,321 kg)
Draught4.5 ft (1.4 m)
Ramps1
Propulsion1x Hotchkiss petrol engine, water jet propulsion
Speed5–6 kn (9.3–11.1 km/h; 5.8–6.9 mph)
Capacity10 long tons (10,160 kg)
ArmamentNone
ArmourNone 1926. In 1936, bulletproof plate added to steering shelter [1]

The motor landing craft (MLC) was a vessel used in the 1920s and 30s. It was specifically designed to deliver a tank to shore [2] and may be considered the predecessor of all Allied landing craft mechanised (LCM). The MLC also saw action in the first year of the Second World War. Its primary purpose was to ferry tanks, troops and stores from ships to shore. The craft derived from discussions of the Landing Craft Committee; the prototype was designed by J. Samuel White of Cowes.

Contents

Manufactured of steel, this shallow-draught, barge-like boat could ferry its cargo to shore at a speed of up to five knots. For a short journey, from shore to shore, the cargo could be rolled or carried into the boat over its ramp. On longer journeys, ship to shore, a derrick would lower the MLC into the sea from the transporting vessel. The derrick would then lower the vehicle or cargo load. Upon touching down on shore, soldiers or vehicles exited by the bow ramp.

Design and development

In Britain, the need for a purpose-built landing craft had been apparent to military and naval staff officers since the Gallipoli Campaign of the First World War. [3] Unfortunately, a good deal of argument between the Army and Royal Navy had not settled whose budget should fund landing craft construction. Both Army and Navy finally agreed to form a landing craft committee comprising "representatives of all the authorities interested and that they should make recommendations on the design of landing craft." [3] After pooling the desired attributes the committee wished to see in a landing craft, the Director of Naval Construction was requested to draw up a design. However, because of fiscal stringency no landing craft was built for some years.

A prototype motor landing craft (MLC1) was built and first sailed in 1926, [4] [5] finishing trials in 1927. It weighed 16 tons, [6] with a draught of 6.5 ft (2 m). The MLC was box-like in appearance, having a square bow and stern. It was also extremely noisy. In order to prevent fouling of the propellers in a craft destined to spend time in surf and possibly be beached, a simple waterjet propulsion system was devised by White's designers. A Hotchkiss petrol engine drove a centrifugal pump which produced a jet of water, pushing the craft ahead or astern, and steering it, according to how the jet was directed. Speed was 5-6 knots and its beaching capacity was good. [7] By 1930, three MLC were operated by the Royal Navy. [3]

Early MLCs were powered by single Hotchkiss petrol engines. Later craft were powered by single Gill petrol engines. [2]

Service history

At the outbreak of the Second World War, six MLCs were based in Britain and three more were with British forces in Malta. [7]

Norwegian Campaign

On 29 April 1940, in the Norwegian Campaign, three MLCs accompanied a Landing Craft Mechanised Mk 1 (LCM) Mark I and four Landing Craft Assault (LCA)s to the Narvik area. [8] [9] Shortly afterwards, two more MLCs arrived. [10] In early May, one of the first tasks accomplished by an MLC was landing French 75mm guns to support Chasseurs in the Gratangen area.

At Hol, on or about 11 May, one MLC sank due to a loading accident when a 13-ton Hotchkiss H39 tank drove off a jetty directly into the cargo well. Both went to the bottom. [11]

The first use of British landing craft in the Second World War, in an opposed landing, saw the disembarkation of French Foreign Legionnaires of the 13th Demi-Brigade (13e DBLE) and supporting French Hotchkiss H39 tanks on the beach at Bjerkvik, eight miles (13 km) above Narvik, on 13 May during the Norwegian campaign. [12] [13] The army commander, Général de brigade Antoine Béthouart, responsible for capturing the area north of Rombaksfjorden, realized that a landing behind German lines, in Herjangsfjorden, a part of Ofotfjorden north of Narvik was required to force the enemy to retire. The plan agreed involved a pre-landing naval bombardment, followed by the landing of three tanks - two from MLCs, and one from the new LCM(1), then the landing of an initial wave of infantry from LCAs, and lastly a follow-on force carried in barges and towed by motor torpedo boats. [14] [15] On 12 May, at about 23:40, Royal Navy destroyers commenced a bombardment of the town intending to destroy all buildings on the foreshore. The plan became somewhat frustrated by the slow deployment of the MLCs (and their tank cargoes), from the davits of the battleship Resolution, then serving as their transport ship. The LCAs landed after the LCM(1) had delivered a tank to the beach. The LCA crews manoeuvred their craft in the small hamlet to the vest of the village of Bjerkvik, the intended landing place, and under a slight rise in the ground in order to spare the soldiers casualties from opposing machine gun fire. Although touchdown was in the early hours of the new day the midnight sun illuminated the battle-field. Once ashore, the 13e DBLE's companies deployed to seize the high ground to the north and south of the town.

The MLCs, along with towed ship's boats and other landing craft types, then turned to landing the rest of 13e DBLE and its supporting elements.

The small flotilla of MLCs, LCAs and an LCM(1) had added greatly to the Allies' tactical latitude. [16]

All the MLCs used at Narvik were lost in operations, fell victim to the sea and weather, or were destroyed and abandoned before the Allied withdrawal. [2]

Dunkirk

Two motor landing craft participated in Operation Dynamo, evacuating soldiers of the British Expeditionary Force off the beaches to the east of Dunkirk harbour. The MLCs worked alongside an LCM(1) and a number of LCAs. MLC12 was abandoned at Dunkirk on 2 June 1940, and a day later MLC17 met the same fate. [17]

See also

Notes

Notes
    Citations
    1. ↑ Maund, p. 5
    2. 1 2 3 Buffetaut, p. 33
    3. 1 2 3 Maund, p.4
    4. ↑ Buffetaut, p 33
    5. ↑ Bruce, p. 11
    6. ↑ Buffetaut, p.34
    7. 1 2 Fergusson, p.43
    8. ↑ Ladd, 1976, p.18
    9. ↑ Maund, p. 37
    10. ↑ Maund, p. 17
    11. ↑ Maund, p. 33
    12. ↑ Buffetaut 1994, p. 27
    13. ↑ Maund 1949, p. 41
    14. ↑ Maund, p. 41
    15. ↑ Porch, p. 469
    16. ↑ Maund, p. 42
    17. ↑ "British vessels lost at sea in World War 2 - landing ships and craft, LSI, LST, LCT, LCG, LCV, LCVP etc".

    Related Research Articles

    During World War II, Operation Abercrombie was an Anglo-Canadian reconnaissance raid on the area around the French coastal village of Hardelot, located south of Boulogne-sur-Mer, in the Pas-de-Calais. It had been scheduled for the night of 19/20 April 1942, but delayed until 21/22 April. The raid was largely unopposed but, on review, the benefits were thought not to have been worth the effort. Due to a navigation error the Canadian detachment lost their way and had to abort.

    Landing craft Seagoing watercraft

    Landing craft are small and medium seagoing watercraft, such as boats and barges, used to convey a landing force from the sea to the shore during an amphibious assault. The term excludes landing ships, which are larger. Production of landing craft peaked during World War II, with a significant number of different designs produced in large quantities by the United Kingdom and United States.

    Dock landing ship Type of amphibious warfare ship

    A dock landing ship is an amphibious warfare ship with a well dock to transport and launch landing craft and amphibious vehicles. Some ships with well decks, such as the Soviet Ivan Rogov class, also have bow doors to enable them to deliver vehicles directly onto a beach. Modern dock landing ships also operate helicopters.

    Amphibious warfare Military operation attacking from air and sea to land

    Amphibious warfare is a type of offensive military operation that today uses naval ships to project ground and air power onto a hostile or potentially hostile shore at a designated landing beach. Through history the operations were conducted using ship's boats as the primary method of delivering troops to shore. Since the Gallipoli Campaign, specialised watercraft were increasingly designed for landing troops, material and vehicles, including by landing craft and for insertion of commandos, by fast patrol boats, zodiacs and from mini-submersibles.

    Landing Ship, Tank Amphibious assault ship of World War II

    Landing Ship, Tank (LST), or tank landing ship, is the naval designation for ships first developed during World War II (1939–1945) to support amphibious operations by carrying tanks, vehicles, cargo, and landing troops directly onto shore with no docks or piers. This enabled amphibious assaults on almost any beach.

    Landing Craft Assault Landing craft used extensively in World War II

    Landing Craft Assault (LCA) was a landing craft used extensively in World War II. Its primary purpose was to ferry troops from transport ships to attack enemy-held shores. The craft derived from a prototype designed by John I. Thornycroft Ltd. of Woolston, Hampshire, UK. During the war it was manufactured throughout the United Kingdom in places as various as small boatyards and furniture manufacturers.

    Landing Craft Mechanized Landing craft designed for carrying vehicles

    The landing craft mechanized (LCM) is a landing craft designed for carrying vehicles. They came to prominence during the Second World War when they were used to land troops or tanks during Allied amphibious assaults.

    Landing ship, infantry

    A Landing ship, infantry (LSI) or infantry landing ship was one of a number of types of British Commonwealth vessels used to transport landing craft and troops engaged in amphibious warfare during the Second World War. LSIs were operated by the Royal Navy, British Merchant Navy, Royal Canadian Navy, Royal Indian Navy, and Royal Australian Navy. They transported British Commonwealth and other Allied troops in sea assaults and invasions throughout the war.

    LCPL

    The Landing Craft Personnel (Large) or LCP (L) was a landing craft used extensively in the Second World War. Its primary purpose was to ferry troops from transport ships to attack enemy-held shores. The craft derived from a prototype designed by the Eureka Tug-Boat Company of New Orleans, Louisiana, USA. Manufactured initially in boatyards in and around New Orleans, as requirements grew it was produced in a number of yards around the United States. Typically constructed of pine planks and plywood, and fitted with some armor plate, this shallow-draft boat with a crew of 3, could ferry an infantry platoon of 36 to shore at 8 knots (13 km/h). Men generally entered the boat by walking over a gangplank from the boat deck of their troop transport as the LCP(L) hung from its davits. When loaded, the LCP(L) was lowered into the water. Soldiers exited the boat by jumping or climbing down from the craft's bow or sides.

    HMAS <i>Assault</i>

    HMAS Assault is a former Royal Australian Navy (RAN) training centre that was in use during World War II, located at Nelson Bay in the Mid North Coast region of New South Wales, Australia.

    HMS <i>Glengyle</i> Infantry landing ship of the Royal Navy

    HMS Glengyle was a 9,919 GRT cargo ship that served in the Second World War as an infantry landing ship (large) of the Royal Navy. She carried Commonwealth and other Allied troops in amphibious operations. Glengyle was able to make good speed on long ocean voyages to operational areas and then, by means of the many landing craft carried aboard, land assault infantry, vehicles, and stores on contested shores.

    Amphibious warfare ship Ship used in amphibious warfare

    An amphibious warfare ship is an amphibious vehicle warship employed to land and support ground forces, such as marines, on enemy territory during an amphibious assault.

    Dinassaut

    The Dinassaut was a type of riverine military unit employed by the French Navy during the first Indochina War. It's an example of Riverine artillery.

    Invasion of Elba

    The invasion of Elba, codenamed Operation Brassard, was part of the Italian campaign during the Second World War. The invasion was carried out between 17–19 June 1944 by Free French Forces supported by British and American ships and aircraft.

    Inter-Service Training and Development Centre

    The Inter-Service Training and Development Centre (ISTDC) was a department under the British Chiefs of Staff set up prior to World War II for the purpose of developing methods and equipment to use in Combined Operations.

    LCM 1 Landing craft used in WWII

    The Landing Craft, Mechanised Mark 1 or LCM (1) was a landing craft used extensively in the Second World War. Its primary purpose was to ferry tanks from transport ships to attack enemy-held shores. Ferrying troops, other vehicles, and supplies were secondary tasks. The craft derived from a prototype designed by John I. Thornycroft Ltd. of Woolston, Hampshire, UK. During the war it was manufactured in the United Kingdom in boatyards and steel works. Constructed of steel and selectively clad with armour plate, this shallow-draft, barge-like boat with a crew of 6, could ferry a tank of 16 long tons to shore at 7 knots (13 km/h). Depending on the weight of the tank to be transported the craft might be lowered into the water by its davits already loaded or could have the tank placed in it after being lowered into the water.

    LCM (2) Vessel used for amphibious landings by the US in World War Two

    The Landing Craft, Mechanized Mark 2 or LCM (2) was a landing craft used for amphibious landings early in the United States' involvement in the Second World War. Though its primary purpose was to transport light tanks from ships to enemy-held shores, it was also used to carry guns and stores. The craft was designed by the Navy's Bureau of Construction and Repair and the initial production contract was let to the American Car & Foundry Company. A total of 147 were built by this company and Higgins Industries. Because of its light load capacity and the rapid production of the superseding LCM (3), the LCM (2) quickly fell out of use following the Allied invasion of North Africa in 1942.

    Landing Barge, Kitchen

    The Landing Barge, Kitchen or LBK was a landing craft used to support amphibious landings in North Western Europe during and after the Normandy invasion in the Second World War. Its primary purpose was to provide hot meals to the crews of the many minor landing craft not fitted with galley facilities. Constructed of steel, this shallow-draft lighter had storage and serving space to feed 900 men for one week. The kitchen capacity was able to provide 1,600 hot meals and 800 cold meals a day.

    Ramped cargo lighter

    The ramped cargo lighter or RCL was a landing craft used in many parts of the world during the Second World War. Designed in Canada and manufactured in Vancouver and Toronto, its primary purpose was lighterage work following assault landings. The RCL also provided water transport in coastal operations. These lighters were built in sections to simplify shipping and assembled in the theatre of operations.

    References

    This page is based on this Wikipedia article
    Text is available under the CC BY-SA 4.0 license; additional terms may apply.
    Images, videos and audio are available under their respective licenses.