LCAs leave HMS Rocksand, a landing ship, infantry, for the island of Nancowry in the British occupation of the Nicobar Islands, October 1945 | |
Class overview | |
---|---|
Name | Landing ship, infantry |
Operators | |
Succeeded by | Landing ship logistics |
Built | 1938–1945 |
Completed | ~40 |
Active | 0 |
General characteristics | |
Troops | 150 to 1,500, |
Crew | 120 to 300 officers and ratings |
Armament | Typically a range of anti-aircraft guns |
Armour | Typically anti-splinter mattresses and gun shields |
A infantry landing ship (naval designation LSI for landing ship, infantry) was one of a number of types of British Commonwealth vessels used to transport landing craft and troops engaged in amphibious warfare during the Second World War. LSIs were operated by the Royal Navy, British Merchant Navy, Royal Canadian Navy, Royal Indian Navy, and Royal Australian Navy. They transported British Commonwealth and other Allied troops in sea assaults and invasions throughout the war.
Typically, an LSI would transport its cargo of infantry from its embarkation port to close to the coast to be invaded. This location (the "lowering position" in Royal Navy terminology) was approximately 6–11 miles off shore. The troops would then transfer to landing craft, most commonly LCAs, for the journey to the beach. The landing craft would return to the LSI after disembarking their cargo and be hoisted up to embark additional troops.
In the years immediately before war was declared the Inter-Service Training and Development Centre sought to identify ships suitable to carry Army and Royal Marine formations being employed in amphibious operations. Such ships would not be purpose-built, but would be found within the lists of merchant marine vessels. [1] These ships needed to be fast and have davits capable of lowering the new landing craft assault fully loaded with troops. [2] Glengyle and her sisters, Glenearn, Glenroy, and Breconshire, then abuilding, were determined to be ideal for infantry landing ships. [3] This class of four fast passenger and cargo liners were intended for the Far East trade route. [4] The Admiralty acquired the four Glens shortly after their launchings, and converted them into fast supply ships. By June 1940, Glengyle, Glenearn, and Glenroy were under conversion to LSI(L)s. The Admiralty insisted on keeping Breconshire in a fast cargo configuration, so the ISTDC consulted the Director of Naval Construction about suitable requisitioned ships. The Dutch Continental passenger steamers Queen Emma and Princess Beatrix were converted to LSIs. Displacing approximately 3,000 gross registered tons and able to make 22 knots, these vessels could carry as many as 800 troops apiece. [5] These were the original 5 LSIs. More LSIs would be found in the years to come from requisitioning or new construction provided by the United States under Lend-Lease.
LSIs were grouped according to their troop capacity and endurance. [6] Initially, all were requisitioned merchant vessels that exchanged carrying lifeboats for landing craft. [7] During April and June 1940, the Glens underwent further conversion into LSIs capable of transporting an embarked force of up to 34 officers and 663 other ranks and carrying 12 LCAs on Welin-McLachan davits and 1 LCM(1) stored in chocks on deck and launched by 30-ton derricks. [8] [9] [10] Glengyle was built by Caledon Shipbuilding & Engineering Company, Dundee, for the Glen Line. The only vital alterations to the 18 knot Glengyle and her sisters, Glenroy and Glenearn, were to assure davits strong enough to lower fully loaded LCAs, and to provide accommodation for the army units to be transported. [11] This latter alteration entailed introducing tables, forms, and posts for slinging hammocks into the former cargo hold. [12] Glengyle, the first LSI, was accepted into service on 10 September and, on 31 January 1941, she sailed around Africa to the Mediterranean.
Smaller LSI, such as Queen Emma and Princess Beatrix, were generally converted cross-channel ferries, [13] or a converted passenger ship. [14]
Conversion was accomplished, as with LSI(L), by adding davits for the landing craft, providing troop accommodation, plus some defensive armament, such as QF 12 pounder 12 cwt naval guns, and anti-aircraft guns, such as the 20 mm Oerlikon cannon.
In Canada in the spring of 1943, work was under way on the conversion of Prince David and Prince Henry to landing ship infantry (medium) (LSI (M)). They were reconfigured to carry 550 infantrymen transported in six LCAs and two LCM(1)s, and have large sick-bay facilities for the anticipated casualties. Their old 6-inch (152 mm) guns were replaced with two twin 4 inch mountings, two single Bofors 40mm guns, and ten Oerlikons. The rebuilding, which took place at Esquimalt and Vancouver, was completed in December 1943 and shortly after re-commissioning, she left for the United Kingdom via Panama canal and New York City, under Captain T.D. Kelly RCNR, (her final commanding officer) who had supervised the fitting-out of both ships. The ship's davits were capable of lifting an LCA which, by this time in the war, was approaching 14 tons.
In Australia in mid-1942, HMAS Manoora, an ocean liner that had been converted to armed merchant cruiser, was marked for conversion into the Royal Australian Navy's first landing ship, infantry at Garden Island Dockyard. [15] Her armament was removed and replaced with a single 12-pounder gun, six 40 mm Bofors, and eight 20 mm Oerlikons. [16] The Supermarine Walrus amphibian aircraft was removed, and the ship was modified to carry US manufactured landing craft: 17 LCVPs, and two LCM(3)s. [17] [18] Manoora was initially able to accommodate 850 soldiers, but later modifications increased this to 1,250. [19] The ship was recommissioned on 2 February 1943 with the pennant number C77, and after spending six months on amphibious warfare training in Port Phillip, was deployed to New Guinea. [20]
In the United States, a commercial hull was put in war production by the Maritime Commission; the C1-S-AY1 subtype of thirteen ships built by the Consolidated Steel Corporation, were modified for use as LSI(L)s under lend-lease. [21] These ships were all given two-word names beginning with "Empire", such as SS Empire Spearhead. All were able to accommodate two LCA flotillas; a total of 24 craft. The Empire Broadsword was lost during the invasion of Normandy to a mine. Empire Javelin was sunk by a U-boat torpedo on 28 December 1944. All these ships had davits fitted to accept LCAs and the other appropriate British manufactured landing craft for LSIs.
Normally British converted LSIs were fitted with heavy-duty power-operated davits. [22] Early landing ships were fitted with Welin-McLachlin davits – these being generally in use in the Merchant Navy for standard 99 man lifeboats. [23] As the weight of LCAs increased through the war (eventually approaching 14 tons) heavier davits were required. Later LSIs and those being refitted were provisioned with luffing davits of a crossbeam type. [24] The davits themselves provided a demarcation between the responsibilities of the LSI crew (either Royal Navy or Merchant Navy) and the members of the LCA flotilla.
Some of the LSIs were commissioned into the Royal Navy, received navy crews, and flew the White Ensign, while most retained their civilian crews and flew the Red Ensign. [25] Royal Navy LSIs had Royal Navy landing craft flotillas assigned to them until 1943, when a proportion of landing craft flotillas were manned by Royal Marine crews. Merchant Navy LSIs would have Royal Navy gunners for the anti-aircraft equipment, and Royal Navy officers and ratings operating the ship’s flotilla of landing craft. [26] Generally, these divisions of personnel did not cooperate or share in each other's work responsibilities.
LSIs in Royal Canadian Navy service were crewed by Canadians and, by late 1943 onwards, were assigned RCN landing craft flotillas. The crews intermingled, lent a hand as needed in one another's work, and messed together.
LSI(S) | Landing ship, infantry (small) |
---|---|
LSI(M) | Landing ship, infantry (medium) |
LSI(L) | Landing ship, infantry (large) |
LSI(H) | Landing ship, infantry (hand-hoisting) |
Landing craft are small and medium seagoing watercraft, such as boats and barges, used to convey a landing force from the sea to the shore during an amphibious assault. The term excludes landing ships, which are larger. Production of landing craft peaked during World War II, with a significant number of different designs produced in large quantities by the United Kingdom and United States.
HMAS Kanimbla was a passenger ship converted for use as an armed merchant cruiser and landing ship infantry during World War II. Built during the mid-1930s as the passenger liner MV Kanimbla for McIlwraith, McEacharn & Co, the ship operated in Australian waters until 1939, when she was requisitioned for military service, converted into an armed merchant cruiser, and commissioned in the Royal Navy as HMS Kanimbla.
HMAS Manoora was an ocean liner that served in the Royal Australian Navy (RAN) during World War II. She was built in Scotland in 1935 for the Cairns to Fremantle coastal passenger run for the Adelaide Steamship Company. She was requisitioned by the RAN for naval service in 1939. Manoora was initially converted into an armed merchant cruiser (AMC), operating primarily in Australian, New Guinea, and Pacific waters, with deployments to Singapore and the Bay of Bengal.
Landing Craft Assault (LCA) was a landing craft used extensively in World War II. Its primary purpose was to ferry troops from transport ships to attack enemy-held shores. The craft derived from a prototype designed by John I. Thornycroft Ltd. of Woolston, Hampshire, UK. During the war it was manufactured throughout the United Kingdom in places as various as small boatyards and furniture manufacturers.
The Landing Craft Personnel (Large) or LCP (L) was a landing craft used extensively in the Second World War. Its primary purpose was to ferry troops from transport ships to attack enemy-held shores. The craft derived from a prototype designed by the Eureka Tug-Boat Company of New Orleans, Louisiana, USA. Manufactured initially in boatyards in and around New Orleans, as requirements grew it was produced in a number of yards around the United States. Typically constructed of pine planks and plywood, and fitted with some armor plate, this shallow-draft boat with a crew of 3 could ferry an infantry platoon of 36 to shore at 8 knots (13 km/h). Men generally entered the boat by walking over a gangplank from the boat deck of their troop transport as the LCP(L) hung from its davits. When loaded, the LCP(L) was lowered into the water. Soldiers exited the boat by jumping or climbing down from the craft's bow or sides.
The Landing Craft Infantry (LCI) were several classes of landing craft used by the Allies to land large numbers of infantry directly onto beaches during World War II. They were developed in response to a British request for seagoing amphibious assault ships capable of carrying and landing substantially more troops than their smaller assault landing craft (LCA). The result was a small steel ship that could land 200 men, traveling from rear bases on its own bottom at a speed of up to 15 knots.
Empire Battleaxe was a British ship of the Second World War and as HMS Donovan in service with the Royal Navy just after the Second World War. Built as a Type C1-S-AY1 Landing Ship, Infantry named Cape Berkeley she then saw merchant service as Empire Battleaxe before being commissioned into the Royal Navy as HMS Empire Battleaxe and then Donovan. After she was decommissioned she returned to merchant service as Empire Battleaxe and was returned to the USA where she was renamed Cape Berkeley once again. A proposed sale in 1948 to China and renaming to Hai C fell through and she was scrapped in 1966.
SS Empire Javelin was an Infantry Landing Ship designated an "LSI (Large)" in service with the UK in the latter part of World War II. Launched on 25 October 1943, she was a United States Maritime Commission C1-S-AY1 subtype, one of thirteen similar ships built by Consolidated Steel Corporation.
The Royal Australian Navy and Australian Army have operated 29 amphibious warfare ships. These ships have been used to transport Army units and supplies during exercises and operational deployments.
HMS Sainfoin was a landing ship, infantry of the Royal Navy that was built in 1943 by Consolidated Steel Corporation, Wilmington, California, United States as the merchant vessel Cape Washington. She was transferred to the Ministry of War Transport in 1944 and renamed Empire Crossbow. Later that year, she was requisitioned by the Royal Navy and commissioned as HMS Sainfoin, with the pennant number F183. In 1946, she was returned to merchant service as Empire Crossbow. She was transferred to the United States in 1947 and renamed Cape Washington. The ship was then laid up until scrapped in 1964.
HMS Glengyle was a 9,919 GRT cargo ship that served in the Second World War as an infantry landing ship (large) of the Royal Navy. She carried Commonwealth and other Allied troops in amphibious operations. Glengyle was able to make good speed on long ocean voyages to operational areas and then with its landing craft, transport assault infantry, vehicles and stores to defended shores.
An amphibious warfare ship is an amphibious vehicle warship employed to land and support ground forces, such as marines, on enemy territory during an amphibious assault.
HMS Sansovino was an infantry landing ship in service with the Royal Navy during the late stages of the Second World War.
HMS Empire Spearhead was a Type C1-S-AY-1 Infantry Landing Ship (LSI) chartered by the British Ministry of War Transport (MoWT) during World War II. She was built by Consolidated Steel Corporation, Wilmington, California. She was launched as Cape Girardeau and completed as Empire Spearhead. In 1945, she was transferred to the Royal Navy and was later renamed HMS Ormonde. Later that year she was transferred back to the MoWT and renamed Empire Spearhead. In 1947, she was transferred to the United States Maritime Commission and renamed Cape Girardeau. The ship was laid up in 1950 and renamed Empire Spearhead. She was scrapped in 1966.
The Inter-Service Training and Development Centre (ISTDC) was a department under the British Chiefs of Staff set up prior to World War II for the purpose of developing methods and equipment to use in Combined Operations.
The motor landing craft (MLC) was a vessel used in the 1920s and 30s. It was specifically designed to deliver a tank to shore and may be considered the predecessor of all Allied landing craft mechanised (LCM). The MLC also saw action in the first year of the Second World War. Its primary purpose was to ferry tanks, troops and stores from ships to shore. The craft derived from discussions of the Landing Craft Committee; the prototype was designed by J. Samuel White of Cowes.
The Landing Craft, Mechanised Mark 1 or LCM (1) was a landing craft used extensively in the Second World War. Its primary purpose was to ferry tanks from transport ships to attack enemy-held shores. Ferrying troops, other vehicles, and supplies were secondary tasks. The craft derived from a prototype designed by John I. Thornycroft Ltd. of Woolston, Hampshire, UK. During the war it was manufactured in the United Kingdom in boatyards and steel works. Constructed of steel and selectively clad with armour plate, this shallow-draft, barge-like boat with a crew of 6, could ferry a tank of 16 long tons to shore at 7 knots (13 km/h). Depending on the weight of the tank to be transported the craft might be lowered into the water by its davits already loaded or could have the tank placed in it after being lowered into the water.
The ramped cargo lighter or RCL was a landing craft used in many parts of the world during the Second World War. Designed in Canada and manufactured in Vancouver and Toronto, its primary purpose was lighterage work following assault landings. The RCL also provided water transport in coastal operations. These lighters were built in sections to simplify shipping and assembled in the theatre of operations.