Formation | January 1995 |
---|---|
Legal status | 501(c)(3) |
Purpose | Professional craft certification |
Headquarters | Fairfax Virginia, United States |
Region served | U.S. |
President | Peter Juhren, Morrow Equipment Company |
Main organ | Board of Directors |
Website | www |
National Commission for the Certification of Crane Operators commonly referred to by the acronym NCCCO is a non-profit organization, established in January 1995 and headquartered in Fairfax, Virginia, United States with regional offices in Dunedin, Florida and Murray, Utah for the certification of crane operators. [1]
The organization is run by a Board of Directors with a President, Vice-President, and 30 Commissioners from 10 industry groups. The Commissioners make up ten Exam Management Committees with the responsibility of monitoring written and practical certification examinations for mobile, tower, overhead, and articulating (loader or knuckle-boom) crane operators, digger derrick operators, crane inspectors, lift directors, signal persons, and riggers, and report to the Board of Directors. There is also an Ethics and Discipline Committee that establishes ethical standards and standards of conduct respectively. [2]
NCCCO certifications are accredited by the American National Standards Institute (ANSI) for fairness, validity, and reliability in testing, and the covered written and practical testing, including Rigger Level I and II programs. [3] OSHA has recognized NCCCO since 1999. [4]
OSHA will begin requiring accredited crane operator certification on November 10, 2018, the final compliance date, but since the 2017 delay the NCCCO has maintained not waiting. [5] The Associated General Contractors of America (AGC) joined with members of the Coalition for Crane Operator Safety (CCOS) and urged Congress to finalize the rule. Most of the crane industry has been against the inclusion of a rated operating capacity (ROC) as well as a provision that the employer evaluate operators concerning their ability to safely operate assigned equipment and document the evaluation. [6] The first part is not included but the employer provision was added back. [7]
The American National Standards Institute is a private nonprofit organization that oversees the development of voluntary consensus standards for products, services, processes, systems, and personnel in the United States. The organization also coordinates U.S. standards with international standards so that American products can be used worldwide.
The Occupational Safety and Health Administration is a regulatory agency of the United States Department of Labor that originally had federal visitorial powers to inspect and examine workplaces. The United States Congress established the agency under the Occupational Safety and Health Act, which President Richard M. Nixon signed into law on December 29, 1970. OSHA's mission is to "assure safe and healthy working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education, and assistance." The agency is also charged with enforcing a variety of whistleblower statutes and regulations. OSHA's workplace safety inspections have been shown to reduce injury rates and injury costs without adverse effects on employment, sales, credit ratings, or firm survival.
A forklift is a powered industrial truck used to lift and move materials over short distances. The forklift was developed in the early 20th century by various companies, including Clark, which made transmissions, and Yale & Towne Manufacturing, which made hoists. Since World War II, the use and development of the forklift truck have greatly expanded worldwide. Forklifts have become an indispensable piece of equipment in manufacturing and warehousing. In 2013, the top 20 manufacturers worldwide posted sales of $30.4 billion, with 944,405 machines sold.
Safety is the state of being "safe", the condition of being protected from harm or other danger. Safety can also refer to the control of recognized hazards in order to achieve an acceptable level of risk.
Nondestructive testing (NDT) is any of a wide group of analysis techniques used in science and technology industry to evaluate the properties of a material, component or system without causing damage. The terms nondestructive examination (NDE), nondestructive inspection (NDI), and nondestructive evaluation (NDE) are also commonly used to describe this technology. Because NDT does not permanently alter the article being inspected, it is a highly valuable technique that can save both money and time in product evaluation, troubleshooting, and research. The six most frequently used NDT methods are eddy-current, magnetic-particle, liquid penetrant, radiographic, ultrasonic, and visual testing. NDT is commonly used in forensic engineering, mechanical engineering, petroleum engineering, electrical engineering, civil engineering, systems engineering, aeronautical engineering, medicine, and art. Innovations in the field of nondestructive testing have had a profound impact on medical imaging, including on echocardiography, medical ultrasonography, and digital radiography.
The UL enterprise is a global safety science company headquartered in Northbrook, Illinois, composed of three organizations, UL Research Institutes, UL Standards & Engagement and UL Solutions.
Certification is part of testing, inspection and certification and the provision by an independent body of written assurance that the product, service or system in question meets specific requirements. It is the formal attestation or confirmation of certain characteristics of an object, person, or organization. This confirmation is often, but not always, provided by some form of external review, education, assessment, or audit. Accreditation is a specific organization's process of certification. According to the U.S. National Council on Measurement in Education, a certification test is a credentialing test used to determine whether individuals are knowledgeable enough in a given occupational area to be labeled "competent to practice" in that area.
Effective safety training is an unofficial phrase used to describe the training materials designed to teach occupational safety and health standards developed by the United States government labor organization, Occupational Safety and Health Administration (OSHA). OSHA has produced many standards and regulations that affect employers and employees in the United States. United States employers have a legal responsibility to educate employees on all workplace safety standards and the hazards that their employees may face while on the job, and providing effective safety training meets that responsibility.
Nationally Recognized Testing Laboratory is the term used by the United States Occupational Safety and Health Administration to identify third-party organizations that have the necessary qualifications to perform safety testing and certification of products covered within OSHA and each organization's scopes. The testing and certification are conducted in accordance with U.S. consensus-based product safety test standards developed or issued by U.S. standards organizations
Workplace health surveillance or occupational health surveillance (U.S.) is the ongoing systematic collection, analysis, and dissemination of exposure and health data on groups of workers. The Joint ILO/WHO Committee on Occupational Health at its 12th Session in 1995 defined an occupational health surveillance system as "a system which includes a functional capacity for data collection, analysis and dissemination linked to occupational health programmes".
Divers Institute of Technology (DIT) is a private, for-profit educational institution for the training of commercial divers and located in Seattle, Washington. Founded in 1968 in Seattle, Washington, Divers Institute of Technology is located on the North end of Lake Union near Gas Works Park in the Wallingford district.
The International Electrical Testing Association (NETA), formerly the National Electrical Testing Association, is a trade association dedicated to improving electrical testing standards in the United States and sharing those standards internationally. NETA is accredited by the American National Standards Institute (ANSI) as a standards developing entity. It is guided by an active Board of Directors consisting of professionals within the electrical testing industry. The Board meets quarterly for official meetings. Board members also participate on various NETA committees, such as the Standards Review Council, Certification Exam, Membership, Finance, Association Development and Strategy, Promotions and Marketing, Nominations and Mission Based Programs.
ANSI Z535 is an American standard that sets forth a system for presenting safety and accident prevention information. It corresponds to the international ISO 3864 standard and can be integrated with other ISO standards to meet global HazCom standards when products and related documentation must be properly labeled for export.
The American Society for Nondestructive Testing, Inc. or ASNT is a technical society for nondestructive testing (NDT) professionals. ASNT evolved from The American Industrial Radium and X-ray Society which was founded in 1941. Its headquarters is located in Columbus, Ohio, and there are 70 local sections in the United States and 14 local sections in other countries.
Accredited Crane Operator Certification OSHA regulation 29 CFR 1926 Subpart CC, released August 9, 2010, requires crane operators involved in construction to be certified by an accredited certification provider by November 10, 2014. An operator is defined as any person operating the equipment. To be accredited, certification providers must be accredited by a nationally recognized accrediting agency, defined as "an organization that, due to its independence and expertise, is widely recognized as competent to accredit testing organizations. Examples of such accrediting agencies include, but are not limited to, the National Commission for Certifying Agencies and the American National Standards Institute." This is the first time certification by an accredited certification provider has been required on a national level, although individual states and cities have required crane operator certification as far back as 2000. The new OSHA standards make the completion of this requirement an important topic of knowledge for the crane and lifting industry.
An insulating link is a device used on the hook of a crane to protect the crane operatives from the danger of electrocution should the crane come into contact with a power line. Insulating links are essentially robust insulators and prevent the flow of electricity from bare, suspended wires through cranes and into personnel working near the crane. Variants of insulating links are also made for specific use in antenna guy wires, and foundry and munitions applications.
People who are driving as part of their work duties are an important road user category. First, workers themselves are at risk of road traffic injury. Contributing factors include fatigue and long work hours, delivery pressures, distractions from mobile phones and other devices, lack of training to operate the assigned vehicle, vehicle defects, use of prescription and non-prescription medications, medical conditions, and poor journey planning. Death, disability, or injury of a family wage earner due to road traffic injury, in addition to causing emotional pain and suffering, creates economic hardship for the injured worker and family members that may persist well beyond the event itself.
Associated Training Services, commonly known as ATS is a heavy equipment training institution based in Sun Prairie, Wisconsin. It was founded in 1959 by Robert Klabacka as the National Institute of Concrete Construction. The institute offers training programs in heavy equipment, mobile cranes, construction-related trucks, rigging, signaling, and commercial motor vehicles. ATS is one of the oldest training institution in United States of America has been an accredited sponsor providing accredited crane operator certification through the National Center for Construction Education and Research (NCCER), in Alachua, Florida since 2003, and the National Commission for the Certification of Crane Operators (NCCCO)
Safety signs are a type of sign designed to warn of hazards, indicate mandatory actions or required use of Personal protective equipment, prohibit actions or objects, identify the location of firefighting or safety equipment, or marking of exit routes.
The National Center for Construction Education and Research, commonly referred to by the acronym NCCER, is a not-for-profit 501(c)(3) education foundation for professional craft certification, formed in 1996.