Overhead crane

Last updated

An overhead crane, featuring runways, bridge, and hoist in a traditional industrial environment. DCC38974rvancopp.jpg
An overhead crane, featuring runways, bridge, and hoist in a traditional industrial environment.
Overhead crane at the Skanska precast concrete factory in Hjarup, Sweden. Travers1 hjarup.jpg
Overhead crane at the Skanska precast concrete factory in Hjärup, Sweden.
Gantry-style overhead cranes of the Hainaut quarry in Soignies, Belgium. 0 Ponts roulants - Carrieres du Hainaut a Soignies (1).JPG
Gantry-style overhead cranes of the Hainaut quarry in Soignies, Belgium.

An overhead crane, commonly called a bridge crane, is a type of crane found in industrial environments. An overhead crane consists of two parallel rails seated on longitudinal I-beams attached to opposite steel columns by means of brackets. The traveling bridge spans the gap. A hoist, the lifting component of a crane, travels along the bridge. If the bridge is rigidly supported on two or more legs running on two fixed rails at ground level, the crane is called a gantry crane (USA, ASME B30 series) or a goliath crane (UK, BS 466).

Contents

Unlike mobile or construction cranes, overhead cranes are typically used for either manufacturing or maintenance applications, where efficiency or downtime are critical factors.

Single Girder Overhead Crane

The single girder type overhead crane is the most common overhead crane. It is generally used for light applications, normally up to 10 tonnes.

Double Girder Overhead Crane

The double girder overhead crane structure is used for heavier applications up to 125 tons and reaching over 100 feet of span. It can also be used to gain lifting height because the hoist of the double girder overhead crane is placed on the beams and the hook fits between them.

Suspended Overhead Crane

The rails of a suspended overhead crane are secured to the ceiling of the building. The elimination of dedicated support columns provides additional floor space, but limits lifting capacity.

History

In 1876 Sampson Moore in England designed and supplied the first ever electric overhead crane, which was used to hoist guns at the Royal Arsenal in Woolwich, London. [1] Since that time Alliance Machine, now defunct, holds an AISE citation for one of the earliest cranes in the USA market. This crane was in service until approximately 1980, and is now in a museum in Birmingham, Alabama. Over the years important innovations, such as the Weston load brake (which is now rare) and the wire rope hoist (which is still popular), have come and gone. The original hoist contained components mated together in what is now called the built-up style hoist. These built up hoists are used for heavy-duty applications such as steel coil handling and for users desiring long life and better durability. They also provide for easier maintenance. Now many hoists are package hoists, built as one unit in a single housing, generally designed for ten-year life, but the life calculation is based on an industry standard when calculating actual life. See the Hoists Manufacturers Institute site [2] for true life calculation, which is based on load and hours used. In today's modern world for the North American market, there are a few governing bodies for the industry. The Overhead Alliance is a group that represents Crane Manufacturers Association of America, Hoist Manufacturers Institute, and Monorail Manufacturers Association. These product counsels of the Material Handling Industry of America have joined forces to create promotional materials to raise the awareness of the benefits of overhead lifting. The members of this group are marketing representatives of the member companies.

Early manufacture

Configurations:

While sharing major components, overhead cranes are manufactured in a number of configurations based on applications.

EOT (Electric Overhead Traveling) Crane

EOT cranes are a common type of overhead crane. They are found in many factories and warehouses. These cranes are electrically operated by a control pendant, radio/IR remote pendant, or from an operator cabin attached to the crane.

Rotary overhead crane

This type of overhead crane has one end of the bridge mounted on a fixed pivot and the other end carried on an annular track; the bridge traverses the circular area beneath. This offers improvement over a jib crane by making possible a longer reach and eliminating lateral strains on the building walls. [5]

Polar crane

This type of overhead crane has both ends of the bridge mounted on an annular track. The bridge runs to entire diameter of the track, as opposed to just the radius for a rotary crane. Polar cranes are commonly used in containment buildings at nuclear power stations, fitting their circular, steam pressure containing design. [6]

Applications

Overhead cranes are commonly used in the refinement of steel and other metals, such as copper and aluminium. At every step of the manufacturing process, until it leaves a factory as a finished product, metal is handled by an overhead crane. Raw materials are poured into a furnace by crane, hot metal is then rolled to specific thickness and tempered or annealed, and then stored by an overhead crane for cooling, the finished coils are lifted and loaded onto trucks and trains by overhead crane, and the fabricator or stamper uses an overhead crane to handle the steel in his factory. The automobile industry uses overhead cranes to handle raw materials. Smaller workstation cranes, such as jib or gantry cranes, handle lighter loads in a work area, such as CNC mill or saw.

Almost all paper mills use bridge cranes for regular maintenance, needing removal of heavy press rolls and other equipment. The bridge cranes are used in the initial construction of paper machines because they make it easier to install the heavy cast iron paper drying drums and other massive equipment, some weighing as much as 70 tons[ which? ].

Longest Overhead Crane to build the longest wind turbines at LM Windpower. Longest Overhead Crane to build the longest wind turbines.jpg
Longest Overhead Crane to build the longest wind turbines at LM Windpower.
A remarkable engineering effort was made by Protech in the province of Quebec, Canada, to build these Giant Overhead Cranes. A 160 foot long Overhead Crane in the renewable energy sector.jpg
A remarkable engineering effort was made by Protech in the province of Quebec, Canada, to build these Giant Overhead Cranes.

Recently, Overhead Cranes have been used in the Windpower industry. Giant Cranes such as this one are being used to build the world's longest wind turbines.

Example of an overhead crane being used to lift heavy rolls Overhead Crane for Coil Lifting.jpg
Example of an overhead crane being used to lift heavy rolls

In many instances, the cost of a bridge crane can be largely offset with savings from not renting mobile cranes in the construction of a facility that uses a lot of heavy process equipment.

See also

Related Research Articles

<span class="mw-page-title-main">Crane (machine)</span> Type of machine

A crane is a machine used to move materials both vertically and horizontally, utilizing a system of a boom, hoist, wire ropes or chains, and sheaves for lifting and relocating heavy objects within the swing of its boom. The device uses one or more simple machines, such as the lever and pulley, to create mechanical advantage to do its work. Cranes are commonly employed in transportation for the loading and unloading of freight, in construction for the movement of materials, and in manufacturing for the assembling of heavy equipment.

<span class="mw-page-title-main">Heavy equipment</span> Vehicles designed for executing construction tasks

Heavy equipment, heavy machinery, earthmovers, construction vehicles, or construction equipment, refers to heavy-duty vehicles specially designed to execute construction tasks, most frequently involving earthwork operations or other large construction tasks. Heavy equipment usually comprises five equipment systems: the implement, traction, structure, power train, and control/information.

<span class="mw-page-title-main">Crane (rail)</span> Type of crane used on a railroad

A railway crane is a type of crane used on a railway for one of three primary purposes: freight handling in goods yards, permanent way (PW) maintenance, and accident recovery work. Although the design differs according to the type of work, the basic configuration is similar in all cases: a rotating crane body is mounted on a sturdy chassis fitted with flanged wheels. The body supports the jib and provides all the lifting and operating mechanisms; on larger cranes, an operator's cabin is usually provided. The chassis is fitted with buffing (UK) and/or coupling gear to allow the crane to be moved by a locomotive, although many are also self-propelled to allow limited movement about a work site.

<span class="mw-page-title-main">Box girder bridge</span> Type of bridge

A box girder bridge, or box section bridge, is a bridge in which the main beams comprise girders in the shape of a hollow box. The box girder normally comprises prestressed concrete, structural steel, or a composite of steel and reinforced concrete. The box is typically rectangular or trapezoidal in cross-section. Box girder bridges are commonly used for highway flyovers and for modern elevated structures of light rail transport. Although the box girder bridge is normally a form of beam bridge, box girders may also be used on cable-stayed and other bridges.

<span class="mw-page-title-main">Samson and Goliath (cranes)</span> Shipbuilding gantry cranes in Belfast

Samson and Goliath are the twin shipbuilding gantry cranes situated at Queen's Island, Belfast, Northern Ireland. The cranes, which were named after the Biblical figures Samson and Goliath, dominate the Belfast skyline and are landmark structures of the city. Comparative newcomers to the city, the cranes rapidly came to symbolise Belfast in a way that no building or monument had hitherto done.

<span class="mw-page-title-main">Gantry crane</span> Type of overhead crane used in industrial environments

A gantry crane is a crane built atop a gantry, which is a structure used to straddle an object or workspace. They can range from enormous "full" gantry cranes, capable of lifting some of the heaviest loads in the world, to small shop cranes, used for tasks such as lifting automobile engines out of vehicles. They are also called portal cranes, the "portal" being the empty space straddled by the gantry.

<span class="mw-page-title-main">Demag</span> Former German company

Demag was a German heavy equipment industrial group whose individual companies are now scattered. The Demag name can be today found for example as the Demag Cranes and Components and Sumitomo (SHI) Demag.

<span class="mw-page-title-main">Hoist (device)</span> Device used for lifting or lowering a load

A hoist is a device used for lifting or lowering a load by means of a drum or lift-wheel around which rope or chain wraps. It may be manually operated, electrically or pneumatically driven and may use chain, fiber or wire rope as its lifting medium. The most familiar form is an elevator, the car of which is raised and lowered by a hoist mechanism. Most hoists couple to their loads using a lifting hook. Today, there are a few governing bodies for the North American overhead hoist industry which include the Hoist Manufactures Institute, ASME, and the Occupational Safety and Health Administration. HMI is a product counsel of the Material Handling Industry of America consisting of hoist manufacturers promoting safe use of their products.

<span class="mw-page-title-main">Material-handling equipment</span> Machinery and equipment used for transporting objects and materials

Material handling equipment (MHE) is mechanical equipment used for the movement, storage, control, and protection of materials, goods and products throughout the process of manufacturing, distribution, consumption, and disposal. The different types of equipment can be classified into four major categories: transport equipment, positioning equipment, unit load formation equipment, and storage equipment.

<span class="mw-page-title-main">Sir William Arrol & Co.</span>

Sir William Arrol & Co. was a Scottish civil engineering and construction business founded by William Arrol and based in Glasgow. It built some of the most famous bridges in the United Kingdom including the second Tay Bridge, the Forth Bridge and Tower Bridge in London.

<span class="mw-page-title-main">Stothert & Pitt</span> Former British engineering company

Stothert & Pitt was a British engineering company founded in 1855 in Bath, England. It was the builder of various engineering products ranging from Dock cranes to construction plant and household cast iron items. It went out of business in 1989. The name and intellectual property became part of Clarke Chapman.

<span class="mw-page-title-main">Fairbairn steam crane</span>

A Fairbairn crane is a type of crane of an 'improved design', patented in 1850 by Sir William Fairbairn. There are numerous hand-powered versions around the world and one surviving steam-powered example in Bristol Docks, England.

<span class="mw-page-title-main">Bulk-handling crane</span>

A bulk-handlingcrane is one that, instead of a simple hook that can handle a range of slung loads, has an integral grab for lifting bulk cargoes such as coal, mineral ore etc.

<span class="mw-page-title-main">Engineered Lifting Systems & Equipment</span>

Engineered Lifting Systems & Equipment Inc (ELS) is a Canadian manufacturing company specializing in standard and custom overhead material lifting systems and equipment. ELS was founded in by Jim Muir in Waterloo, Ontario and its headquarters is currently located in Elmira, Ontario.

Electric overhead traveling cranes or EOT cranes are a common type of overhead crane, also called bridge cranes. They consist of parallel runways, much akin to rails of a railroad, with a traveling bridge spanning the gap. EOT cranes are specifically powered by electricity.

<span class="mw-page-title-main">Block-setting crane</span> Crane type for installing large stone blocks

A block-setting crane is a form of crane. They were used for installing the large stone blocks used to build breakwaters, moles and stone piers.

<span class="mw-page-title-main">Ring crane</span> Type of construction crane

A ring crane is a form of large construction crane with a luffing jib. It is distinguished by its slew pivot being in the form of a ring-shaped track, rather than a narrow central spindle. The broad base this gives to the slewing section above allows it to slew whilst carrying extremely heavy loads.

<span class="mw-page-title-main">Hercules crane</span>

A Hercules crane was a form of block-setting crane, developed in the 1870s. They were characterised by a wheeled, mobile gantry running on rails, surmounted by a slewing horizontal jib, held up by a kingpost.

A patented track crane is a crane with a bottom flange of hardened steel and a raised tread to improve rolling.

<span class="mw-page-title-main">Arrol Gantry</span> Shipyard gantry in Belfast

The Arrol Gantry was a large steel structure built by Sir William Arrol & Co. at the Harland and Wolff shipyard in Belfast, Northern Ireland. It was built to act as overhead cranes for the building of the three Olympic-class liners.

References

  1. "Overhead power travelling crane for the Gun Factory of the Royal Arsenal" The Engineer, 22 September 1876, p219.
  2. "MHI Vision and Mission". MHI. Retrieved 27 April 2014.
  3. 1 2 3 Kurrer, Karl-Eugen (2008). The history of the theory of structures: from arch analysis to computational mechanics . Berlin: Ernst & Sohn. pp.  411–415. ISBN   978-3-433-01838-5.
  4. The London Gazette, 1 Feb 1867 (original patent filed on 25 Jan 1854)
  5. Towne, Henry (1883). A treatise on cranes. Stamford, CT: Yale and Towne. p. 129. OCLC   938144. Rotary Bridge Crane...provided with a circular overhead track carrying the outer end of the jib, or rotary bridge. It...avoids the severe lateral strains upon the building and thus dispenses with heavy walls.
  6. https://www.mprnews.org/story/2011/04/15/nuclear-crane-hutchinson [ bare URL ]
  7. Towne (1883: 124)
  8. "Improved overhead steam traveling crane". Scientific American . XXXI (794). New York. 21 March 1891.

Standards