Nokia water supply contamination

Last updated

Location of Nokia in Finland Nokia sijainti Suomi.svg
Location of Nokia in Finland

The Nokia water supply contamination occurred from November 28 to 29, 2007, when a large part of the water supply in Nokia, Finland, was contaminated with treated sewage water. [1] The contamination affected an area with some 12,000 inhabitants [2] and caused an epidemic of thousands of cases of diarrhea and vomiting [3] primarily due to Norovirus and Campylobacter infections. [4] Hundreds of inhabitants were hospitalised, and the town was forced to temporarily forbid all use of tap water. [5]

Contents

The cause of the contamination was revealed to be a combination of different events. A maintenance man in the Nokia waterworks had opened a valve between tap water and sewage water pipes to let some tap water flush out the sewage pipe. The valve had been previously installed against regulations. Because of pressure differences, the water flowed in the opposite direction, contaminating the tap water. At the same time, maintenance work was being carried out at another site, so the first calls from people complaining about the water were not taken seriously because they were thought to be connected with that event. It took two days until an official warning was given that the water was contaminated and until bottled water deliveries were started. [6]

Background

There was a poorly designed installation in the Kullaanvuori water treatment facility. A drinking water pipe was connected to a wastewater pipe for the purpose of flushing the wastewater pipe. Such an installation is illegal, and for good reason; if the water pressure in the drinking water pipe is too low, backflow occurs. This is what happened in this event. A maintenance worker accidentally opened the valve, and wastewater flowed into the drinking water supply for two days. The contamination was actually detected, but the company decided to ignore it, assuming it was a transient pulse caused by the repairs.[ clarification needed ]

Identified bacteria and viruses

As of December 15, 2007:

Related Research Articles

<span class="mw-page-title-main">Plumbing</span> Systems for conveying fluids

Plumbing is any system that conveys fluids for a wide range of applications. Plumbing uses pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids. Heating and cooling (HVAC), waste removal, and potable water delivery are among the most common uses for plumbing, but it is not limited to these applications. The word derives from the Latin for lead, plumbum, as the first effective pipes used in the Roman era were lead pipes.

<span class="mw-page-title-main">Greywater</span> Type of wastewater generated in households without toilet wastewater

Greywater refers to domestic wastewater generated in households or office buildings from streams without fecal contamination, i.e., all streams except for the wastewater from toilets. Sources of greywater include sinks, showers, baths, washing machines or dishwashers. As greywater contains fewer pathogens than blackwater, it is generally safer to handle and easier to treat and reuse onsite for toilet flushing, landscape or crop irrigation, and other non-potable uses. Greywater may still have some pathogen content from laundering soiled clothing or cleaning the anal area in the shower or bath.

<span class="mw-page-title-main">Tap water</span> Publicly available water supplied to homes

Tap water is water supplied through a tap, a water dispenser valve. In many countries, tap water usually has the quality of drinking water. Tap water is commonly used for drinking, cooking, washing, and toilet flushing. Indoor tap water is distributed through indoor plumbing, which has existed since antiquity but was available to very few people until the second half of the 19th century when it began to spread in popularity in what are now developed countries. Tap water became common in many regions during the 20th century, and is now lacking mainly among people in poverty, especially in developing countries.

<span class="mw-page-title-main">Water pollution</span> Contamination of water bodies

Water pollution is the contamination of water bodies, usually as a result of human activities, so that it negatively affects its uses. Water bodies include lakes, rivers, oceans, aquifers, reservoirs and groundwater. Water pollution results when contaminants mix with these water bodies. Contaminants can come from one of four main sources: sewage discharges, industrial activities, agricultural activities, and urban runoff including stormwater. Water pollution is either surface water pollution or groundwater pollution. This form of pollution can lead to many problems, such as the degradation of aquatic ecosystems or spreading water-borne diseases when people use polluted water for drinking or irrigation. Another problem is that water pollution reduces the ecosystem services that the water resource would otherwise provide.

<span class="mw-page-title-main">Tap (valve)</span> Valve controlling the release of a liquid or gas

A tap is a valve controlling the release of a fluid.

A plumbing fixture is an exchangeable device which can be connected to a plumbing system to deliver and drain water.

<span class="mw-page-title-main">Water supply</span> Provision of water by public utilities, commercial organisations or others

Water supply is the provision of water by public utilities, commercial organisations, community endeavors or by individuals, usually via a system of pumps and pipes. Public water supply systems are crucial to properly functioning societies. These systems are what supply drinking water to populations around the globe. Aspects of service quality include continuity of supply, water quality and water pressure. The institutional responsibility for water supply is arranged differently in different countries and regions. It usually includes issues surrounding policy and regulation, service provision and standardization.

<span class="mw-page-title-main">Backflow prevention device</span> Device that prevents undesired water flow

A backflow prevention device is used to protect potable water supplies from contamination or pollution due to backflow.

<span class="mw-page-title-main">Water supply network</span> System of engineered hydrologic and hydraulic components providing water

A water supply network or water supply system is a system of engineered hydrologic and hydraulic components that provide water supply. A water supply system typically includes the following:

  1. A drainage basin
  2. A raw water collection point where the water accumulates, such as a lake, a river, or groundwater from an underground aquifer. Raw water may be transferred using uncovered ground-level aqueducts, covered tunnels, or underground water pipes to water purification facilities.
  3. Water purification facilities. Treated water is transferred using water pipes.
  4. Water storage facilities such as reservoirs, water tanks, or water towers. Smaller water systems may store the water in cisterns or pressure vessels. Tall buildings may also need to store water locally in pressure vessels in order for the water to reach the upper floors.
  5. Additional water pressurizing components such as pumping stations may need to be situated at the outlet of underground or aboveground reservoirs or cisterns.
  6. A pipe network for distribution of water to consumers and other usage points
  7. Connections to the sewers are generally found downstream of the water consumers, but the sewer system is considered to be a separate system, rather than part of the water supply system.

The Ontario Clean Water Agency (OCWA) is a Crown agency of the Government of Ontario that provides operation, maintenance and management services for more than 450 water and wastewater treatment facilities in the province.

<span class="mw-page-title-main">Sanitary engineering</span> Application of engineering methods to improve sanitation of human communities

Sanitary engineering, also known as public health engineering or wastewater engineering, is the application of engineering methods to improve sanitation of human communities, primarily by providing the removal and disposal of human waste, and in addition to the supply of safe potable water. Traditionally a branch of civil engineering and now a subset of environmental engineering, in the mid-19th century, the discipline concentrated on the reduction of disease, then thought to be caused by miasma. This was accomplished mainly by the collection and segregation of sewerage flow in London specifically, and Great Britain generally. These and later regulatory improvements were reported in the United States as early as 1865.

<span class="mw-page-title-main">Vacuum sewer</span> Method of transporting sewage from its source to a sewage treatment plant

A vacuum sewer or pneumatic sewer system is a method of transporting sewage from its source to a sewage treatment plant. It maintains a partial vacuum, with an air pressure below atmospheric pressure inside the pipe network and vacuum station collection vessel. Valves open and reseal automatically when the system is used, so differential pressure can be maintained without expending much energy pumping. A single central vacuum station can collect the wastewater of several thousand individual homes, depending on terrain and the local situation.

<span class="mw-page-title-main">YIT</span>

YIT Oyj is the largest Finnish and a significant North European construction company. YIT is headquartered in Helsinki and its stock is listed on Nasdaq Helsinki Oy. YIT develops and builds apartments, business premises and entire areas. YIT is also specialised in demanding infrastructure construction and paving. YIT operates in 11 countries: Finland, Russia, Scandinavia, the Baltic States, the Czech Republic, Slovakia and Poland.

Ahtium was a Finnish mining company that operated the Talvivaara nickel mine from the company's establishment in 2004 until the mining business was sold to the state-owned Terrafame in 2015.

<span class="mw-page-title-main">Sewage</span> Wastewater that is produced by a community of people

Sewage is a type of wastewater that is produced by a community of people. It is typically transported through a sewer system. Sewage consists of wastewater discharged from residences and from commercial, institutional and public facilities that exist in the locality. Sub-types of sewage are greywater and blackwater. Sewage also contains soaps and detergents. Food waste may be present from dishwashing, and food quantities may be increased where garbage disposal units are used. In regions where toilet paper is used rather than bidets, that paper is also added to the sewage. Sewage contains macro-pollutants and micro-pollutants, and may also incorporate some municipal solid waste and pollutants from industrial wastewater.

<span class="mw-page-title-main">Backflow</span> Unwanted reverse flow of water

Backflow is a term in plumbing for an unwanted flow of water in the reverse direction. It can be a serious health risk for the contamination of potable water supplies with foul water. In the most obvious case, a toilet flush cistern and its water supply must be isolated from the toilet bowl. For this reason, building codes mandate a series of measures and backflow prevention devices to prevent backflow.

<span class="mw-page-title-main">History of water supply and sanitation</span>

The history of water supply and sanitation is one of a logistical challenge to provide clean water and sanitation systems since the dawn of civilization. Where water resources, infrastructure or sanitation systems were insufficient, diseases spread and people fell sick or died prematurely.

Water supply and sanitation in Japan is characterized by numerous achievements and some challenges. The country has achieved universal access to water supply and sanitation; has one of the lowest levels of water distribution losses in the world; regularly exceeds its own strict standards for the quality of drinking water and treated waste water; uses an effective national system of performance benchmarking for water and sanitation utilities; makes extensive use of both advanced and appropriate technologies such as the jōkasō on-site sanitation system; and has pioneered the payment for ecosystem services before the term was even coined internationally. Some of the challenges are a decreasing population, declining investment, fiscal constraints, ageing facilities, an ageing workforce, a fragmentation of service provision among thousands of municipal utilities, and the vulnerability of parts of the country to droughts that are expected to become more frequent due to climate change.

Water supply and sanitation in Vietnam is characterized by challenges and achievements. Among the achievements is a substantial increase in access to water supply and sanitation between 1990 and 2010, nearly universal metering, and increased investment in wastewater treatment since 2007. Among the challenges are continued widespread water pollution, poor service quality, low access to improved sanitation in rural areas, poor sustainability of rural water systems, insufficient cost recovery for urban sanitation, and the declining availability of foreign grant and soft loan funding as the Vietnamese economy grows and donors shift to loan financing. The government also promotes increased cost recovery through tariff revenues and has created autonomous water utilities at the provincial level, but the policy has had mixed success as tariff levels remain low and some utilities have engaged in activities outside their mandate.

<span class="mw-page-title-main">Lead service line</span>

A lead service line is a pipe made of lead which is used in potable water distribution to connect a water main to a user's premises.

References