Onboard passenger information system

Last updated

Onboard passenger information system (PIS) is an integrated system for supplying passengers of public transport with information on their current journey through audiovisual information. The systems are installed on-board of public transport vehicles and provide ambient information to passengers both inside and outside of the vehicles. This is in contrast to a station/wayside passenger information system providing information to passengers on the platforms. [1]

Contents

Overview

This system provides real-time information to passengers regarding various aspects of their journey, including schedules, station stops, route maps, safety instructions, and emergency procedures. [2] The passenger information system has two modes of conveying information: [3]

Functions

The on-board passenger information system provides relevant information throughout the journey allowing passengers to make informed decisions about their travel plans, including transfers, connections, and arrival times. [4]

PIS also enables the distribution of safety procedures.

The PIS streamlines public transport operations by disseminating information to passengers automatically. By reducing manual announcements and inquiries, the system frees up onboard staff to focus on other tasks.

PIS improves accessibility for passengers with disabilities or special needs by providing multi-channel information delivery, including audio announcements and visual displays, allowing passengers, regardless of their abilities, to access the information they need to navigate the journey independently. [5]

History

In the 20th century, onboard passenger information relied solely on manual announcements by on-board conductors and staff using an analog audio system. Passengers were verbally informed about upcoming stations, arrival times, and other relevant information. [6] [7]

Mechanical display boards such as flip-disc display were used as destination signs. Other static signage, such as stickers, folders, etc., provided visual communication of public transport schedules, vehicle numbers, and other information. [8]  

The adoption of LED technology in the latter half of the 20th century modernized onboard communication in public transport. LED displays offered dynamic visual information and were energy-efficient for relaying real-time updates on station stop calling patterns and end destination information. Concurrently with the introduction of LED, digital audio systems began replacing traditional analog audio systems, offering clearer sound quality and the ability to broadcast pre-recorded messages. These systems enhanced accessibility for passengers because of the improved speech intelligibility of said digital audio systems.

The widespread adoption of Global Positioning System (GPS) technology in the 21st century enabled the integration of real-time location tracking into the on-board passenger information system. This allowed onboard systems to determine the train's position and inform passengers about upcoming stations. [9]

The introduction of TFT displays added more visualization to on-board passenger information systems allowing a more graphical representation of the information. It allowed passengers to rely on a wide range of information, including route maps, images, videos, infomercials from the public transport agency, etc.

The proliferation of wireless connectivity, including Wi-Fi and cellular networks, has further enhanced the capabilities of the Passenger Information System. Whereas before the introduction of wireless connectivity, the passenger information system could only rely on local information available on-board of the train, since the introduction of wireless connectivity, passengers can access real-time updates from the passenger information system, improving the overall travel experience.

Components

Audio announcement system

Broadcasting of audio announcements through the speakers installed on-board of the vehicle. These announcements can be triggered by the automatic information system, providing auditory cues for passengers, including announcements of arrival in the next station, welcome messages, etc. The on-board crew can use specific handsets part of the audio announcement system to provide public address announcements to the passengers on top of the automatic information. Minimally consists of an amplifier, speakers, handsets (to perform public address).  

Audio intercom system

Audio intercom system provides communication between the passengers and on-board staff. This allows for bidirectional communication between the on-board crew members (crew intercom) and the on-board crew members and passengers (passenger intercom). Minimally consists out of a handset (for crew interaction) and passenger communication units (for passenger interaction). [10]

LED displays

Digital display screens inside the vehicle (to address passengers on-board) or outside the vehicle (to address passengers on the platform) displaying mainly textual information to passengers. They typically provide information on upcoming stations, end station, route number of the vehicle, etc. Compared to TFT displays, LED displays are better suited for use on the outside of the vehicle thanks to better contrast, higher readability with direct sunlight, etc.

TFT/LCD displays  

Digital display screens inside the vehicle displaying textual and graphical information to passengers. They typically provide information on the current journey information (upcoming stations, arrival times, dynamic route maps, etc.) as well as infotainment information (advertisements, instruction videos, etc.) [11]

Interactive touch screens

Installed in select (often locked) compartments of the vehicle and used by the driver/crew to control the Passenger Information System. Typical functionalities include starting the automatic announcements by entering a trip code, launching an ad-hoc pre-recorded announcement, consulting the current status of the PIS system, etc.

Controller

The central controller contains a software application that is responsible for driving the automatic information distribution across the different components of the onboard passenger information system.

Management software

Software application that runs off-board (often a Cloud-hosted solution) and that allows public transport operators to manage the PIS system in terms of configuration (e.g., changes to the PIS behavior), operational management (e.g., launching an ad-hoc announcement from the OCC and handle interactions with 3rd party systems (e.g., ITS for exchange of real-time information).

Characteristics

Audio

LED

TFT

Controller software

Interactions with other systems

Challenges

Passenger Information Systems in public transport have some inherent challenges linked to the different life cycles of the systems (mechanical – electronic – software) in place. Regarding  the mechanical vehicle bodies, there are examples of trains that have a lifetime of 30+ years, while the typical lifetime of hardware/electronic systems is between 5–10 years. The expectations of passengers and public transit agencies in terms of the functionalities of the Passenger information systems are evolving on a much higher pace, which can only be realized by tackling them in software. One of the primary challenges in on-board passenger information systems is synchronizing the disparate lifecycles of mechanical, electronic and software components. Coordinating maintenance schedules and upgrade cycles across these domains is essential to prevent disruptions. [14] [15]

Related Research Articles

<span class="mw-page-title-main">RoadShow</span>

RoadShow is the first "Multi-Media on-Board" (MMOB) service system on transit vehicles in Hong Kong. It was launched by The Kowloon Motor Bus Holdings Limited in December 2000. The MMOB business was taken over by RoadShow Holdings Limited in 2001 prior to its listing on the Stock Exchange.

<span class="mw-page-title-main">Public address system</span> Electronic system for amplifying sound

A public address system is an electronic system comprising microphones, amplifiers, loudspeakers, and related equipment. It increases the apparent volume (loudness) of a human voice, musical instrument, or other acoustic sound source or recorded sound or music. PA systems are used in any public venue that requires that an announcer, performer, etc. be sufficiently audible at a distance or over a large area. Typical applications include sports stadiums, public transportation vehicles and facilities, and live or recorded music venues and events. A PA system may include multiple microphones or other sound sources, a mixing console to combine and modify multiple sources, and multiple amplifiers and loudspeakers for louder volume or wider distribution.

<span class="mw-page-title-main">Business telephone system</span> Telephone system typically used in business environments

A business telephone system is a telephone system typically used in business environments, encompassing the range of technology from the key telephone system (KTS) to the private branch exchange (PBX).

<span class="mw-page-title-main">London Underground 1992 Stock</span> Electric multiple unit used on the Central and Waterloo & City lines of the London Underground

The London Underground 1992 Stock is a type of rolling stock used on the Central and Waterloo & City lines of the London Underground. A total of 85 eight-car trains were built for the Central line and 5 four-car trains were built for the Waterloo & City line.

<span class="mw-page-title-main">Intercom</span> Voice communications system for use within a local area

An intercom, also called an intercommunication device, intercommunicator, or interphone, is a stand-alone voice communications system for use within a building, small collection of buildings or portably within a small coverage area, which functions independently of the public telephone network. Intercoms are generally mounted permanently in buildings and vehicles, but can also be detachable and portable. Intercoms can incorporate connections to public address loudspeaker systems, walkie talkies, telephones, and other intercom systems. Some intercom systems incorporate control of devices such as signal lights and door latches.

<span class="mw-page-title-main">SNCF Class X 72500</span>

The SNCF Class X 72500 diesel multiple units were built by Alstom between 1997 and 2002. They operate longer distance Transport express régional and Intercites services, particularly in the areas south and west of Paris, the Paris to Laon line, around Tours, Nantes, Toulouse, Lyon, Dijon, Nevers, Grenoble, Bordeaux and the South Coast of France. They do not operate in the far north of France.

In broadcasting, channel playout is the generation of the source signal of a radio or television channel produced by a broadcaster, coupled with the transmission of this signal for primary distribution or direct-to-audience distribution via any network. Such radio or television distribution networks include terrestrial broadcasting, cable networks, satellites, IPTV, OTT Video, point-to-point transport over managed networks or the public Internet, etc.

<span class="mw-page-title-main">Passenger information system</span> Electronic public transit communication

A passenger information system, or passenger information display system, is an automated system for supplying users of public transport with information about the nature and the state of a public transport service through visual, voice or other media. It is also known as a customer information system or an operational information system. Among the information provided by such systems, a distinction can be drawn between:

<span class="mw-page-title-main">Journey planner</span> Specialized search engine for travelling

A journey planner, trip planner, or route planner is a specialized search engine used to find an optimal means of travelling between two or more given locations, sometimes using more than one transport mode. Searches may be optimized on different criteria, for example fastest, shortest, fewest changes, cheapest. They may be constrained, for example, to leave or arrive at a certain time, to avoid certain waypoints, etc. A single journey may use a sequence of several modes of transport, meaning the system may know about public transport services as well as transport networks for private transportation. Trip planning or journey planning is sometimes distinguished from route planning, which is typically thought of as using private modes of transportation such as cycling, driving, or walking, normally using a single mode at a time. Trip or journey planning, in contrast, would make use of at least one public transport mode which operates according to published schedules; given that public transport services only depart at specific times, an algorithm must therefore not only find a path to a destination, but seek to optimize it so as to minimize the waiting time incurred for each leg. In European Standards such as Transmodel, trip planning is used specifically to describe the planning of a route for a passenger, to avoid confusion with the completely separate process of planning the operational journeys to be made by public transport vehicles on which such trips are made.

<span class="mw-page-title-main">Personal navigation assistant</span>

A Personal Navigation Assistant (PNA) also known as Personal Navigation Device or Portable Navigation Device (PND) is a portable electronic product which combines a positioning capability and navigation functions.

<span class="mw-page-title-main">Rapid transit</span> High-capacity public transport

Rapid transit or mass rapid transit (MRT), commonly referred to as metro, is a type of high-capacity public transport that is generally built in urban areas. A grade separated rapid transit line below ground surface through a tunnel can be regionally called a subway, tube, or underground. They are sometimes grade-separated on elevated railways, in which case some are referred to as el trains – short for "elevated" – or skytrains. Rapid transit systems are railways, usually electric, that unlike buses or trams operate on an exclusive right-of-way, which cannot be accessed by pedestrians or other vehicles.

<span class="mw-page-title-main">Annax</span> German manufacturer of railway information systems

ANNAX is a German manufacturer of passenger information systems (PIS) for the railway industry. It was founded on 1 January 1996 as a divestment by Robert Bosch GmbH. In 2007, ANNAX took over the traffic business unit of Ascom in Switzerland. In 2018 Wabtec Corporation has acquired ANNAX Group.

<span class="mw-page-title-main">Siscog</span>

SISCOG is a software company that provides decision support systems for resource planning and management in transportation companies, with special experience in the field of railways.

A vehicle tracking system combines the use of automatic vehicle location in individual vehicles with software that collects these fleet data for a comprehensive picture of vehicle locations. Modern vehicle tracking systems commonly use GPS or GLONASS technology for locating the vehicle, but other types of automatic vehicle location technology can also be used. Vehicle information can be viewed on electronic maps via the Internet or specialized software. Urban public transit authorities are an increasingly common user of vehicle tracking systems, particularly in large cities.

iBus (London) Information system for buses in London

iBus is an Automatic Vehicle Location (AVL) system to improve London Buses using technology installed by Siemens. The system tracks all London's buses, providing passengers with audio-visual announcements and improved information on bus arrivals, as well as triggering bus priority at traffic lights.

<span class="mw-page-title-main">Mounted Soldier System</span>

The Mounted Soldier System (MSS) or Ground Warrior is a combat vehicle crewman ensemble integrating advanced gear as an effective force multiplier in combat theater.

<span class="mw-page-title-main">Hubli-Dharwad Bus Rapid Transit System</span> Bus system in Hubballi and Dharwad, India

Hubli-Dharwad Bus Rapid Transit System (HDBRTS) is a bus rapid transit system built to serve the twin cities of Hubali and Dharwad, located in the North-Western part of Karnataka state in India. Hubali-Dharwad BRTS (HDBRTS) project is a Government of Karnataka initiative to foster long-term economic growth in the region. The project promotes fast, safe, comfortable, convenient and affordable public transportation between the twin cities and aims to reduce congestion and air pollution in the region.

<span class="mw-page-title-main">Nomad Digital</span> Internet provider

Nomad Digital is an Internet Protocol (IP) Connectivity provider to the transport sector. It deploys wireless broadband connections for trains, metros, trams and buses, including passenger Wi-Fi services and remote condition monitoring for on-board rail components. Headquartered in Newcastle upon Tyne in England, it operates globally.

<span class="mw-page-title-main">Rainbow Bus Rapid Transit System</span> Bus Rapid transit system connecting Pune and Pimpri-Chinchwad

Rainbow BRTS is a bus rapid transit system in the city of Pune. The system is operated by the Pune Mahanagar Parivahan Mahamandal Limited (PMPML). The infrastructure has been developed by the Pune Municipal Corporation & Pimpri Chinchwad Municipal Corporation, Pune. The project currently envisages 113 km of dedicated bus corridors along with buses, bus stations, terminals and intelligent transit management system.

Autonomous and Remote Navigation Trial Project is the trial of maritime autonomous surface ships (MASS) in commercial operations hold within 2020 in three different sea water areas of Russia.

References

  1. Behnke, Robert W. (July 1995). German "Smart-Bus" Systems: Potential for Application in Portland, Oregon: Volume 1, Technical Report. DIANE Publishing. ISBN   978-0-7881-2025-1.
  2. Meeting, Planning and Transport Research and Computation (International) Co (1996). Public Transport Planning and Operations: Proceedings of Seminar F Held at the Ptrc European Transport Forum, Brunel University, England 2-6 September 1996. PTRC Education and Research Services Limited. ISBN   978-0-86050-295-1.
  3. Golem, Ron; Smith-Heimer, Janet (2010). Relationships Between Streetcars and the Built Environment. Transportation Research Board. ISBN   978-0-309-14309-7.
  4. "The success of rail public transport? It is about how to get people on board". UITP. Retrieved 2024-05-30.
  5. Miesenberger, Klaus; Klaus, Joachim; Zagler, Wolfgang; Karshmer, Arthur (2010-07-05). Computers Helping People with Special Needs, Part II: 12th International Conference, ICCHP 2010, Vienna, Austria, July 14-16, 2010. Proceedings. Springer Science & Business Media. ISBN   978-3-642-14099-0.
  6. "North Wales Coast Railway Notice Board 21 June 2010". www.nwrail.org.uk. Retrieved 2024-05-30.
  7. "One-day all-in excursion to Galway".
  8. "Mass Transit". www.sbcity.org. Retrieved 2024-05-30.
  9. Ramesh, G.; Nagadevara, Vishnuprasad; Naik, Gopal; Suraj, Anil (2014-04-03). Public Private Partnerships. Routledge. ISBN   978-1-317-80960-9.
  10. 1 2 3 "Common System Capabilities – Stock and Crew System". Rail Delivery Group. Retrieved 2024-05-30.
  11. Mansfield, Ian (2023-06-27). "Brent Cross West station passes safety tests ahead of opening". ianvisits.
  12. "General Transit Feed Specification". gtfs.org. Retrieved 2024-05-30.
  13. "What is TCMS?". Rail Engineer. 2015-08-11. Retrieved 2024-05-30.
  14. Schiavone, John J.; Board, National Research Council (U S. ) Transportation Research; Program, Transit Cooperative Research (1999). Understanding and Applying Advanced On-board Bus Electronics. Transportation Research Board. ISBN   978-0-309-06317-3.
  15. "ATOC Approved Code of Practice – Passenger Information During Disruption". ATOC/ACOP015.