Operation Sigma Sigma

Last updated

Sigma
Role Open class sailplane
National originUnited Kingdom
Manufacturer Operation Sigma Ltd
DesignerJohn Sellars
First flight12 September 1971 [1]
Statusstill flying
Number built2 [1]

The Sigma is an experimental glider developed in Britain from 1966 by a team led by Nicholas Goodhart. After disappointing performance during flight testing the Sigma was passed on to a Canadian group which carried out modifications, making the Sigma more competitive. [1]

Contents

Design and development

Designed to compete in the 1970 World Championships, the team aimed to develop a wing that would climb well through a high lift coefficient and a large wing area, but equally had the "maximum possible reduction of area for cruise at low lift coefficients". At the same time for the minimum possible drag they aimed for "extensive" laminar flow. To achieve this they employed flaps that would alter both wing area and wing camber. Based on analysis of the nature of thermals encountered in cross-country flying, they reasoned that by having a slow turning circle, their sailplane could stay close to the central (and strongest) part of the thermal and gain maximum benefit. [1]

Its unusual feature is its ability to vary its wing area using Fowler flaps. It had been tried before by the Hannover Akaflieg in 1938 with their AFH-4, the South African Beatty-Johl BJ-2 Assegai and the SZD Zefir gliders. [2]

Operation Sigma Ltd. was formed, attracting sponsorship from Hawker Siddeley and assistance from eminent aerodynamicists, and construction of a prototype was started at the Slingsby Kirbymoorside factory. A fire at the Slingsby factory in 1968 destroyed the prototype, which was nearing completion. Slingsby Sailplanes Ltd. soon went into receivership after the disastrous fire so the remaining prototype Sigma Type C was relocated to the British European Airways workshops at London Heathrow Airport (LHR). After completion it eventually flew for the first time on 12 September 1971 at the College of Aeronautics, Cranfield. [1]

The wings and tail boom are of aluminum alloy construction and the front of the fuselage is glass-fibre composite, with a welded steel tube centre-section connecting the fuselage components and wings. Other equipment fitted include a retractable main wheel, speed limiting air brakes and a tail parachute housed in a compartment in the rudder. [1]

The hydraulically actuated flaps increased the wing area to 177 square feet (an increase of 35%), lowering the wing loading and stalling speed (37 knots), allowing the desired tight circling when thermalling. [3] The hydraulic pressure needed to move the flaps was provided by the pilot pumping on the rudder pedals, this proving to be tiring, not to mention that moving the flaps in flight was found to be almost impossible due to bending in the wings. Performance testing revealed a disappointing [4] best L/D of 41:1 and the project was wound up in 1977. [1]

The group offered the Sigma up to further development by other parties, selecting a proposal by David Marsden a professor of mechanical engineering at the University of Alberta (on sabbatical at Cranfield Institute of Technology and a glider pilot holding records with his own glider designs such as the Marsden Gemini). [5]

The aircraft was moved to Canada in 1979 by Marsden, modified with a new flap system, conventional ailerons in lieu of outboard flap sections and the tail parachute was removed from the rudder. Despite the glide ratio only increasing to 47:1, its good climb rate made it competitive with contemporary Open Class gliders of the time, breaking the US 300 km triangle record in 1997 at 151 km/h (82 kn). [1]

Variants

Data from:British Gliders and Sailplanes 1922-1970 [6]

Sigma Type A
This version was under construction at the Slingsby factory at Kirbymoorside in 1969 when they were completely destroyed in the 1969 Slingsby factory fire.
Sigma Type B
A version differing in detail from the Type A, not completed.
Sigma Type C
After the fire the project was taken on by Operation Sigma Ltd., ostensibly to supply a world beating sailplane for the World gliding Championships. Of similar outline, shape and size to the original prototypes, the Type C was completely revised in detail, but retained the construction methods of the earlier aircraft.
(Marsden) Sigma
The Sigma after modification in Canada by David Marsden.

Specifications (before Marsden conversion)

Data fromSailplanes 1965-2000 [1]

General characteristics

16.5 m2 (177.60 sq ft) (flaps extended)
26.8 (flaps extended)

Performance

151 ft/min (1.5 kts) (0.772 m/s) (flaps extended)
42.6 kg/m2 (8.725 Lb/sqft) (flaps extended)

Notes

  1. 1 2 3 4 5 6 7 8 9 Simons, Martin (2005). Sailplanes 1965-2000 (2nd revised ed.). Königswinter: EQIP Werbung & Verlag GmbH. ISBN   3 9808838 1 7.
  2. ↑ The SZD Zefir series gliders of the 1960s also had Fowler flapped wings. Zefirs had been piloted to 2. and 3. (Cologne 1960), 1. and 2. (Junin 1962) places at World Championships, with L/D of Zefir-3 (1965) exceeding 43. Also LET L-13 Blaník used Fowler flaps, however the latter was not intended to be a high performance glider. (Development of "Zefir" gliders; Lecture by Jerzy Śmielkiewicz (co-designer). Polish Aviation Technology, Historical Notes, issue 26, Sep 2006)
  3. ↑ "Sigma up for disposal" Flight International 1977
  4. ↑ The SZD Zefir series gliders of the previous decade overcame the control problems with Fowler flaps (abandoning hydraulic and designing minimalistic low friction mechanical controls), but the Zefir designers ultimately concluded that the Fowler flaps are incompatible with the laminar flow required (over 70% of the chord) on the wing of a high performance glider (Jerzy Śmielkiewicz, op.cit.)
  5. ↑ "Sigma finds a home" Flight International, 5 November 1977 p.1353
  6. ↑ Ellison, Norman (1971). British Gliders and Sailplanes 1922-1970 (1st ed.). London: Adam & Charles Black. ISBN   0 7136 1189 8.
  7. ↑ FLIGHT International, 4 March 1971 p318

Related Research Articles

Eta (glider)

The Eta is a German-Italian Open Class two-seater flapped self-launching glider manufactured by ETA Aircraft. On introduction it was the highest performing glider.

PZL Bielsko SZD-50 Puchacz

The PZL Bielsko SZD-50 Puchacz is a Polish two-place training and aerobatic sailplane.

Schreder HP-14 American single-seat glider

The HP-14 is a Richard Schreder-designed all-metal glider aircraft that was offered as a kit for homebuilding during the 1960s and 1970s. It was originally developed by retrofitting improved wings to the fuselage and tail of the HP-13. Schreder won the 1966 US national soaring championship in the prototype HP-14.

Akaflieg München Mü27

The Mü-27 is a research glider aircraft that designed and built in Germany in 1979. Only one example was constructed.

The SZD-8 Jaskółka was a single-seat glider aircraft that was designed and built in Poland at Szybowcowy Zakład Doświadczalny in Bielsko-Biała from 1951.

SZD-6X Nietoperz Polish single-seat tail-less research glider, 1951

The SZD-6x Nietoperz was a single-seat tail-less experimental glider aircraft that was designed and built in Poland at Szybowcowy Zakład Doświadczalny in Bielsko-Biała in 1951. Only one example was constructed.

SZD-14x Jaskółka M Polish single-seat glider, 1954

The SZD-14X Jaskółka M was a single-seat glider designed and built in Poland at Szybowcowy Zakład Doświadczalny - Glider Experimental Works in Bielsko-Biała in 1954. This was an experimental prototype, and only one unit was constructed.

SZD-19 Zefir Polish single-seat glider, 1958

The SZD-19 Zefir is a single-seat glider aircraft that was designed and built in Poland from 1957.

SZD-38 Jantar 1 Polish single-seat glider, 1972

The SZD-38 Jantar 1 (Amber) is a glider designed and produced in Poland from 1971.

SZD-48 Jantar Standard 2/3 Polish single-seat glider, 1977

The SZD-48 Jantar Standard 2 is a Standard Class glider that was designed and produced in Poland starting in 1977.

SZD-40x Halny Polish two-seat glider, 1972

The SZD-40x Halny is an experimental two-seat glider designed and built in Poland in 1971.

IS-2 Mucha Polish single-seat training glider, 1948

The IS-2 Mucha was a single-seat training glider designed and built in Poland starting in 1947.

The Slingsby Type 26 Kite 2 was a post World War II development of the Slingsby Kite, a single seat medium performance sailplane. It sold in small numbers.

Slingsby Falcon 4 British two-seat glider, 1946

The Slingsby T.24 Falcon 4 was a two-seat training glider designed in the UK just after World War II for ATC use. It was judged too expensive for production and only three were completed.

The Applebay Zuni and Zuni II are single-seat, water-ballasted gliders designed to compete in the FAI 15m class.

The Marsden Gemini is a Canadian mid-wing, T-tailed, two-seats in side-by-side configuration, experimental research glider that was designed and constructed by David Marsden at the University of Alberta, first flying in 1973.

The Akaflieg Darmstadt D-40 is an experimental variable geometry single seat sailplane, fitted with almost full span, camber changing flaps for optimum aerodynamics in weak thermals and integrated into the wing so as to minimise flap tip drag. One flew successfully but the D-40, like other variable geometry sailplanes, was not commercialised.

The Akaflieg Braunschweig SB-11 is an experimental, single seat, variable geometry sailplane designed by aeronautical students in Germany. It won the 15 m span class at the World Gliding Championships of 1978 but its advances over the best, more conventional, opposition were not sufficient to lead to widespread imitation.

SZD-42 Jantar 2

The SZD-42 Jantar 2 is a single seat Open Class competition glider, designed and produced in Poland in the 1970s. It features a span of over 20 m (66 ft) and elastic, camber changing flaps. It was placed second, third and seventh at the 1976 World Gliding Championships. Over one hundred were built and more than ninety remain registered.

The Ciani EC.37/53 Spillo or SSVV EC.37/53 Spillo was a single seat competition glider designed and built in Italy in the 1950s. It had the highest aspect ratio wing of any wooden glider. Only one was built.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.