Beatty-Johl BJ-2 Assegai

Last updated
BJ-2 Assegai
RoleSingle seat competition sailplane
National origin South Africa
DesignerW.A.T. Johl and P.J Beatty
First flightJanuary 1961
Number built1

The Beatty-Johl BJ-2 Assegai was a single seat, high performance competition glider built in South Africa in the early 1960s. Only one was built; it was optimised for South African conditions and performed well there, winning two nationals and setting several records, but was less successful under European conditions at the 1965 World Gliding Championships.

Contents

Design and development

The BJ-2 was a successor to the BJ-1, a 60 ft (18.3 m) span glider on which design began in South Africa in 1945 but abandoned before completion as it became clear that the new laminar flow airfoil sections offered better performance. The BJ-2 used one of the 65 series airfoils in conjunction with Fowler flaps. Its design, led by W.A.T. Johl, concentrated on high cross country glide speeds, achieved via a high wing loading and low camber, important in South African gliding conditions with strong thermals and long flights between them. Design work started in 1955 but the BJ-2 was not flown until January 1961, piloted and chiefly built by P.J.Beatty. [1] [2]

The BJ-2 was an almost entirely wooden aircraft, both internally and with a plywood skin on all surfaces. The single spar, 50 ft (15.24 m) span, shoulder mounted wings had three pieces, the centre one with a span of 30 ft 1 in (9.17 m), rectangular in plan, the NACA 65 wing section and no dihedral. The outer pieces were trapezoidal and had 5° dihedral, changing to a non-laminar section at the tip, with the ailerons filling all their trailing edge. The centre panel trailing edge was filled with Fowler flaps, which at maximum, 30° extension increased both the camber and the wing area, the latter by 19.5%, for low speed flight in thermals. Small wing tip bodies were added later. [1] [2]

Its fuselage was a semi-monocoque structure, elliptical in cross-section and tapering uniformly towards the tail. The fin and rudder together were trapezoidal, with a T tail and elevator of constant chord within tapered tips. Lacking the more usual wing mounted airbrakes, the BJ-2 had a pair of petal type, fuselage mounted brakes for glide angle control just aft of the wing. It also had two cruciform braking parachutes deployable from the lower rear fuselage below the rudder. Forward of the wing the upper fuselage line blended smoothly into that of the single piece, sideways opening canopy to limit dive speeds. The undercarriage combined a retractable monowheel, fitted with a brake, and a co-retracting forward skid. The nose was of glass reinforced plastic. [1] [2]

Camber changing Fowler flaps had been used before on gliders, notably on the 1938 Akaflieg Hannover AFH-4 and the 1948 Cijan-Obad Orao II, though not fitted to this design's later version. Whilst they provided the increased camber needed for low speed climbs, they also increased drag, both by reducing the aspect ratio, raising the induced drag, and by the creation of extra vortexes at the outer ends of the flaps. This penalty was less costly in typically strong South African thermals than in the weaker ones found in northern Europe. [2]

The BJ-2 proved to have the intended high speed performance, demonstrated in a series of closed circuit and out and back flights. The fuselage mounted airbrakes proved rather ineffective. [2]

Operational history

The BJ-2's first competitive appearance was at the South African Nationals held from late December 1961 to early January 1962. Flown by Pat Beattie, it came third overall but was the highest placed South African aircraft, making him the national champion. [3] During the competition he set an unofficial world record round a 400 km triangular course at a speed of 102.3 km/h (63.6 mph) and made a 600 km (373 km) out and return flight at 90 km/h (56 mph). [1] [2] [3]

After this the BJ-2 was flown by Bert Dommisse, who completed a 500 km triangle, now an officially FAI recognised pattern, at a record speed of 107.5 km/h (66.8 mph) just before competing with it in the 1963/4 South African Nationals, when he became national champion. [4]

In 1965 the BJ-2 was flown by Dommisse at the World Gliding Championships at South Cerney in the United Kingdom. English conditions, with weak thermals, were not what it was designed for and it finished well down the field. [2] [5]

Specifications

Data from Jane's All the World's Aircraft1962-63 [1] The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs du Monde Volume II [6]

General characteristics

Performance

Notes

  1. 1 2 3 4 5 Taylor, John W R (1962). Jane's All the World's Aircraft 1962-63. London: Sampson Low, Marston & Co. Ltd. p. 336.
  2. 1 2 3 4 5 6 7 8 9 Simons, Martin (2006). Sailplanes 1945-1965 (2nd revised ed.). Königswinter: EQIP Werbung & Verlag GmbH. pp. 226–7. ISBN   3 9807977 4 0.
  3. 1 2 "The South African nationals 1962" (PDF). Sailplane & Gliding. XIII (2): 76, 112. April 1962. Archived from the original (PDF) on 2013-06-05.
  4. ↑ "The BJ-2 glider" (PDF). Soaring. Vol. 28 no. 3. March 1964. pp. 4–5.
  5. ↑ "1965 world gliding championships results". Flight . Vol. 87 no. 2937. 24 June 1965. p. 1029.
  6. ↑ Shenstone, B.S.; K.G. Wilkinson (1963). The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs du Monde Volume II (in English, French, and German) (1st ed.). Zurich: Organisation Scientifique et Technique Internationale du Vol a Voile (OSTIV) and Schweizer Aero-Revue. pp. 34–36.

Related Research Articles

LET L-13 Blaník

The L-13 Blaník is a two-seater trainer glider produced by Let Kunovice since 1956. It is the most numerous and widely used glider in the world. In United States Air Force Academy service, it is designated TG-10C and was used for basic flight training up to 2012.

The Schneider ES-59 Arrow is a sailplane designed and manufactured in Adelaide, South Australia in the early 1960s. The Arrow was manufactured with a one-piece wing of 13.23 metres span. It was the first Australian-built sailplane to compete in the World Gliding Championships, 1963 in Argentina. The Arrow has wood/fabric wings and tail and a wood fuselage. It has a fixed main wheel and nose skid.

Slingsby Skylark 2

The Slingsby T.41 Skylark 2 was a sailplane produced from 1953 by Slingsby Sailplanes at Kirkbymoorside, Yorkshire.

Slingsby Eagle

The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.

SZD-17X Jaskółka L

The SZD-17X Jaskółka L was a single-seat high-performance competition glider designed and built in Poland at Szybowcowy Zakład Doświadczalny in Bielsko-Biała in 1955.

SZD-19 Zefir

The SZD-19 Zefir is a single-seat glider aircraft that was designed and built in Poland from 1957.

SZD-24 Foka

The SZD-24 Foka (Seal) was a single-seat high performance aerobatic glider designed and built in Poland in 1960.

Slingsby Sky

The Slingsby Type 34 Sky is a high performance single seat competition sailplane built in the United Kingdom. It was successful in major events, particularly in the World Gliding Championships of 1952.

Slingsby Swallow

The Slingsby Type 45 Swallow was designed as a club sailplane of reasonable performance and price. One of the most successful of Slingsby's gliders in sales terms, over 100 had been built when production was ended by a 1968 factory fire.

Slingsby Skylark 4

The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.

N.V. Vliegtuigbouw 013 Sagitta

The N.V. Vliegtuigbouw 013 Sagitta is a Dutch mid-wing, single-seat Standard Class glider designed by Piet Alsema and produced by N.V. Vliegtuigbouw.

HKS-1

The HKS-1 was a German 19 19 m (62.3 ft) span high performance two seat sailplane, designed around 1950 to use recent advances in laminar flow airfoils. To avoid premature transition from laminar flow caused by surface interruptions, the HKS-1 dispensed with hinged ailerons, flaps and spoilers and replaced them with a flexible trailing edge. Two were built, setting several records.

Ikarus Košava

The Ikarus Košava is a two-seat sailplane designed and built in Yugoslavia in the early 1950s. It won the 1954 World Gliding Championships in the two seat category and came second in the same event two years later.

Cijan-Obad Orao

The Cijan-Obad Orao is a competition single seat sailplane designed in Yugoslavia just after World War II, one of the most advanced of its type at the time. It flew in three World Gliding Championships, having greatest success at its first in 1950 when it reached third place.

Ikarus Meteor

The Ikarus Meteor is a long-span, all-metal sailplane designed and built in Yugoslavia in the 1950s. It competed in World Gliding Championships (WGC) between 1956 and 1968 and was placed fourth in 1956; it also set new triangular-course world speed records.

Ciani Urendo

The Ciani EC 38/56 Urendo, or SSVV EC 38/56 Urendo is an Italian tandem-seat training glider from the 1950s. Four were built, one winning the Italian National Championships in 1959. Another, restored, still flies.

The Ciani EC.37/53 Spillo or SSVV EC.37/53 Spillo was a single seat competition glider designed and built in Italy in the 1950s. It had the highest aspect ratio wing of any wooden glider. Only one was built.

Győr-2

The Győr-2 was a high performance sailplane designed and built at the Aircraft Designer and Builder Group, Aeroclub of the Rolling-stock Factory, Győr in Hungary in the early 1950s.

CVT2 Veltro

The CVT2 Veltro was an Italian competition glider built in the mid-1950s. Its advanced design incorporated a laminar flow wing, T-tail, retracting undercarriage and a reclining seat to reduce parasitic drag.

Bruni 3V-1 Eolo

The Bruni 3V-1 Eolo was a single seat Italian competition glider, first flown in 1955. It took part World Gliding Championships of 1956 but retired early after sustaining damage.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.