P43 tank

Last updated
P43
Carro armato p43.jpg
Wooden model of P43
Type Heavy tank
Place of originFlag of Italy (1861-1946) crowned.svg  Italy
Production history
DesignedApril 1943
Specifications
Mass29 tonnes (33 short tons)
Length8.16 m (26 ft 9 in)
Width3.04 m (10 ft)
Height2.24 m (7 ft 4 in)
Crew5

Armor 80-100 mm (frontal) 50mm (lateral)
Main
armament
90 mm (3.5 in) Cannone da 90/53
EngineV12 Diesel
420 hp
Power/weight14 hp/t
Fuel capacityunknown
Maximum speed 40 km/h (25 mph)

The P43 was a proposed Italian heavy tank designed in April of 1943, [1] it never left the planning stage and was developed parallel to the P26/40 tank.

Contents

Features

The P43 or P 30/43 was developed by FIAT and Ansaldo simultaneously with the P26/40, of which it was supposed to be a heavier version. The vehicle was planned to have weighed 30 tons and would have mounted an engine of 420 hp. The gun was the same as the P.26 - the 75/34 mm cannon. While still in the design phase it was proposed to use the 90/42 gun derived from anti-aircraft cannone 90/53, [2] [3] or the 105/25 mm cannon mounted on semoventi instead. [4]

The two P43 bis

Model of P43bis P43bis-2.jpeg
Model of P43bis

A photograph of P43 as a wooden model exists (probably on a smaller scale) along with other models of P40 and P43 bis, 30 tons with cannon that looks like it could be a lighter version of the 90/53 piece. In the same picture there is a model of a German Panther version slightly smaller and with probably 90/53 cannon, that the Germanic part stigmatized as a plagiarism of the Panther tank that Italy had received blueprints for the production in license. It seems that this model has received the abbreviation P43 bis (perhaps for the observed inability to get quickly to the production of the P43 with a piece of 90 mm).

This overlap of studies can be originated either by news from the Russian front on the new Soviet medium tank T-34/85 of 32 tons and with 85 mm cannon derived from the anti-aircraft gun either the availability of data and drawings of the German Panther.

According to various publications the engines should have been these:

Frontal protection of 80/100 mm would guarantee equal performance with the machines designed by other nations, such as the Russian 1944 Iosef Stalin 2 of 44 tons (which was 122 mm), the Tiger I of 57 tons and higher than the Panther of 45 tons, which was 80 mm.

See also

Notes

  1. "Tank Archives: Heavy Tank, Italian Style". Tank Archives. 2019-11-02. Retrieved 2019-11-12.
  2. "november 2008".
  3. "Тяжёлый танк по-итальянски". warspot.ru (in Russian). Retrieved 2019-11-12.
  4. Cesare Falessi, Benedetto Parfi, Veicoli da combattimento dell'Esercito Italiano dal 1939 al 1945Intyrama books, 1976, pagg. 83-84

Bibliography

Related Research Articles

Kliment Voroshilov tank Type of heavy tank, Soviet, WW2

The Kliment Voroshilov (KV) tanks is a series of Soviet heavy tanks named after the Soviet defence commissar and politician Kliment Voroshilov which operated with the Red Army during World War II. The KV tanks were known for their heavy armour protection during the early stages of the war, especially during the first year of the German invasion of the Soviet Union. In certain situations, even a single KV-1 or KV-2 supported by infantry could halt large German formations. The German Wehrmacht at that time rarely deployed its tanks against KVs, as their own armament was too poor to deal with the "Russischer Koloss" – "Russian Colossus".

T-70 Type of Light tank

The T-70 was a light tank used by the Red Army during World War II, replacing both the T-60 scout tank for reconnaissance and the T-50 light infantry tank for infantry support. The T-80 light tank was a more advanced version of the T-70 with a two-man turret—it was produced only in very small numbers when light tank production was abandoned. The T-90 self-propelled anti-aircraft gun was a prototype vehicle with twin machine guns, based on the T-70 chassis.

Char B1 Type of Break-through tank, Heavy tank

The Char B1 was a French heavy tank manufactured before World War II.

M13/40 tank Type of Medium tank

The Carro Armato M13/40 was an Italian World War II tank designed to replace the M11/39 in the Italian Army at the start of World War II. It was the primary tank used by the Italians throughout the war. The design was influenced by the British Vickers 6-Ton and was based on the modified chassis of the earlier M11/39. Production of the M11/39 was cut short in order to get the M13/40 into production. The name refers to "M" for Medio (medium) according to the Italian tank weight standards at the time, 13 tonnes was the scheduled weight and 1940 the initial year of production.

M15/42 tank Type of Medium Tank

The Carro Armato M15/42 was the last Italian medium tank produced during World War II. It was based on the earlier M13/40 and M14/41 medium tanks, and was built with the lessons from the North African Campaign in mind. The tank was meant to be a stopgap until the heavier P26/40 tank could be produced in numbers. It did not serve in North Africa, the theatre in which it was intended to operate, but served in Italy and in Yugoslavia with the German Wehrmacht.

M14/41 tank Type of Medium tank

The M 14/41 was a four-crew medium tank that served from 1941 in the Royal Italian Army. The official Italian designation was Carro Armato M 14/41. The tank was first employed in the North African Campaign where its shortcomings quickly became apparent.

P26/40 tank Type of Heavy tank

The P 26/40 was an Italian World War II Heavy tank. It was armed with a 75 mm gun and an 8 mm Breda machine gun, plus another optional machine gun in an anti-aircraft mount. The official Italian designation was Carro Armato P 26/40.

ARL 44 Former French heavy tank

The ARL 44 was a French heavy tank, the development of which started just before the end of the Second World War. Only sixty of these tanks were ever completed, from 1949 onwards. The type proved to be unsatisfactory and was phased out in 1953.

Semovente da 105/25 Type of Self-propelled gun

The Ansaldo 105/25 M43, also known as Semovente 105/25, was an Italian self-propelled gun used during World War II and designed by Fiat-Ansaldo. It was the most powerful self-propelled gun built by Italy in numbers during World War II.

Iveco LMV Type of Infantry mobility vehicle

Iveco LMV is a 4WD tactical vehicle developed by Iveco, and in service with several countries. After its adoption by the Italian Army under the name VTLM Lince (Lynx)(Veicolo-Tattico-Leggero-Multiruolo/Light-Tactical-Multirole-Vehicle), it won the FCLV competition of the British Army as the Panther, but the fleet was put up for sale in 2018.

Auto-Saharan Company

The Auto-Saharan Companies were Italian military units specialised in long range patrols of the Sahara Desert. The units operated from the late 1930s to the Italian surrender in 1943.

AMX-50 Type of Heavy tank

The AMX 50 or AMX-50 was a French heavy tank designed in the immediate post Second World War period. It was proposed as, in succession, the French medium, heavy, and main battle tank, incorporating many advanced features. It was cancelled in the late 1950s however, due to unfavourable economic and political circumstances after serious delays in development.

Continental Motors Company was an American manufacturer of internal combustion engines. The company produced engines as a supplier to many independent manufacturers of automobiles, tractors, trucks, and stationary equipment from the 1900s through the 1960s. Continental Motors also produced automobiles in 1932–1933 under the name Continental Automobile Company. The Continental Aircraft Engine Company was formed in 1929 to develop and produce its aircraft engines, and would become the core business of Continental Motors, Inc.

The Lancia Ro, Lancia Ro-Ro and Lancia 3Ro were 4x2 heavy trucks built by Italian manufacturer Lancia from the 1930s through the 1940s for military and civilian use. The 2-cylinder diesel Ro was produced from 1933 to 1939, the 3-cylinder diesel Ro-Ro from 1935 to 1939 and the improved 5-cylinder diesel 3Ro from 1938 to 1947.

VK 1602 Leopard Type of Reconnaissance vehicle

The light tank VK 16.02 Leopard was a planned German reconnaissance vehicle designed from mid 1941 through January 1943, with the serial production scheduled for April 1943, the project would be canceled before the tank could be put into service but, one prototype is recorded but not found. Most documents of the VK1602 are destroyed after 1945 but there are many documents and clues pointing to the one prototype build.

Freccia IFV Type of Wheeled infantry fighting vehicle

The Freccia is an Italian 8x8 wheeled Infantry fighting vehicle in use with the Italian Army. The first batch of 249 vehicles were ordered to replace Cold War VCC-2 armoured personnel carriers of the Mechanized Brigade "Pinerolo" in Southern Italy. The Freccia is built by a consortium combining Iveco and Oto Melara (armament).

Tanks in the Italian Army

This article deals with the history and development of tanks employed by military forces in Italy from their first use in World War I, the interwar period, during World War II, the Cold War and modern era. The current C1 Ariete is the current main battle tank of the Italian Army.

Vespa-Caproni Armoured Car Type of weapon

The Vespa-Caproni armored car was an Italian military vehicle, designed by the aircraft manufacturer Caproni. Only one prototype was built, which was tested on February 2, 1942 at the Motor Study Center. The vehicle never entered serial production.