Water potential is the potential energy of water per unit volume relative to pure water in reference conditions. Water potential quantifies the tendency of water to move from one area to another due to osmosis, gravity, mechanical pressure and matrix effects such as capillary action. The concept of water potential has proved useful in understanding and computing water movement within plants, animals, and soil. Water potential is typically expressed in potential energy per unit volume and very often is represented by the Greek letter ψ.
Mesophytes are terrestrial plants which are neither adapted to particularly dry nor particularly wet environments. An example of a mesophytic habitat would be a rural temperate meadow, which might contain goldenrod, clover, oxeye daisy, and Rosa multiflora. Mesophytes prefer soil and air of moderate humidity and avoid soil with standing water or containing a great abundance of salts. They make up the largest ecological group of terrestrial plants, and usually grow under moderate to hot and humid climatic regions.
Wilting is the loss of rigidity of non-woody parts of plants. This occurs when the turgor pressure in non-lignified plant cells falls towards zero, as a result of diminished water in the cells. Wilting also serves to reduce water loss, as it makes the leaves expose less surface area. The rate of loss of water from the plant is greater than the absorption of water in the plant. The process of wilting modifies the leaf angle distribution of the plant towards more erectophile conditions.
Soil moisture is the water content of the soil. It can be expressed in terms of volume or weight. Soil moisture measurement can be based on in situ probes or remote sensing methods.
Ecohydrology is an interdisciplinary scientific field studying the interactions between water and ecological systems. It is considered a sub discipline of hydrology, with an ecological focus. These interactions may take place within water bodies, such as rivers and lakes, or on land, in forests, deserts, and other terrestrial ecosystems. Areas of research in ecohydrology include transpiration and plant water use, adaption of organisms to their water environment, influence of vegetation and benthic plants on stream flow and function, and feedbacks between ecological processes, the soil carbon sponge and the hydrological cycle.
Water content or moisture content is the quantity of water contained in a material, such as soil, rock, ceramics, crops, or wood. Water content is used in a wide range of scientific and technical areas, and is expressed as a ratio, which can range from 0 to the value of the materials' porosity at saturation. It can be given on a volumetric or mass (gravimetric) basis.
In soil science, pedotransfer functions (PTF) are predictive functions of certain soil properties using data from soil surveys.
Lyman James Briggs was an American engineer, physicist and administrator. He was a director of the National Bureau of Standards during the Great Depression and chairman of the Uranium Committee before America entered the Second World War. The Lyman Briggs College at Michigan State University is named in his honor.
Infiltration is the process by which water on the ground surface enters the soil. It is commonly used in both hydrology and soil sciences. The infiltration capacity is defined as the maximum rate of infiltration. It is most often measured in meters per day but can also be measured in other units of distance over time if necessary. The infiltration capacity decreases as the soil moisture content of soils surface layers increases. If the precipitation rate exceeds the infiltration rate, runoff will usually occur unless there is some physical barrier.
Lorenzo Adolph Richards or known as Ren was one of the 20th century's most influential minds in the field of soil physics.
Field capacity is the amount of soil moisture or water content held in the soil after excess water has drained away and the rate of downward movement has decreased. This usually takes place 2–3 days after rain or irrigation in pervious soils of uniform structure and texture. The physical definition of field capacity is the bulk water content retained in soil at −33 kPa of hydraulic head or suction pressure. The term originated from Israelsen and West and Frank Veihmeyer and Arthur Hendrickson.
Moisture equivalent is proposed by Lyman Briggs and McLane (1910) as a measure of field capacity for fine-textured soil materials. Moisture equivalent is defined as the percentage of water which a soil can retain in opposition to a centrifugal force 1000 times that of gravity. It is measured by saturating sample of soil 1 cm thick, and subjecting it to a centrifugal force of 1000 times gravity for 30 min. The gravimetric water content after this treatment is its moisture equivalent. This concept is no longer used in soil physics, replaced by field capacity.
Available water capacity is the amount of water that can be stored in a soil profile and be available for growing crops. It is also known as available water content (AWC), profile available water (PAW) or total available water (TAW).
The non-limiting water range (NLWR) represents the range of water content in the soil where limitations to plant growth are minimal. John Letey (1985) from UC Riverside introduced the NLWR concept in an attempt to integrate several physical properties associated with plant or root growth to refine the concept of available water capacity. Alvaro Pires da Silva, Bev Kay, and Ed Perfect (1994) refined the concept and termed it least limiting water range (LLWR).
Water retention curve is the relationship between the water content, θ, and the soil water potential, ψ. This curve is characteristic for different types of soil, and is also called the soil moisture characteristic.
Pore water pressure refers to the pressure of groundwater held within a soil or rock, in gaps between particles (pores). Pore water pressures below the phreatic level of the groundwater are measured with piezometers. The vertical pore water pressure distribution in aquifers can generally be assumed to be close to hydrostatic.
Moisture stress is a form of abiotic stress that occurs when the moisture of plant tissues is reduced to suboptimal levels. Water stress occurs in response to atmospheric and soil water availability when the transpiration rate exceeds the rate of water uptake by the roots and cells lose turgor pressure. Moisture stress is described by two main metrics, water potential and water content.
Plinthite is an iron-rich, humus-poor mixture of clay with quartz and other minerals.
Soils can process and hold considerable amounts of water. They can take in water, and will keep doing so until they are full, or until the rate at which they can transmit water into and through the pores is exceeded. Some of this water will steadily drain through the soil and end up in the waterways and streams, but much of it will be retained, despite the influence of gravity. Much of this retained water can be used by plants and other organisms, also contributing to land productivity and soil health.
The Penman–Monteith equation approximates net evapotranspiration (ET) from meteorological data, as a replacement for direct measurement of evapotranspiration. The equation is widely used, and was derived by the United Nations Food and Agriculture Organization for modeling potential evapotranspiration ET0.
