Plasmatron

Last updated

The Plasmatron, or technically plasma addressed liquid crystal (PALC), is a color television display technology developed by Tektronix and Sony in the 1990s. PALC displays combine rows formed from liquid crystals with columns formed from plasma cells, the latter replacing the transistorized switching in a conventional LCD. [1] Although PALC was successfully developed, thin-film transistor based LCD devices were improved which offset PALC's advantages. PALC development has been largely abandoned since the early 2000s.

Contents

History

PALC was originally developed by Thomas Buzak, who worked at Tektronix in the U.S. Through the late 1980s and early 1990s he developed and patented a number of concepts that used plasma to provide a switching element for a variety of uses. When the project he was working on was canceled, he turned his attention to using the plasma elements as LCD switches, and the PALC system was born. [2]

In 1993 Tektronix licensed the technology to Sony, and together they started development of the Plasmatron televisions. In October 1996 Sony entered a three-year arrangement with Sharp Electronics to share development, with Sharp's role being to help improve the effective display angles. In July 1997 the group was joined by Philips Electronics to improve the resolution of the devices, reduce power consumption and increase brightness. [3] Sony and Sharp both produced high-definition television prototypes using the PALC technology, but these never made it to production.

PALC was offset by the rapid introduction of thin-film transistors, which allowed individual cells of the LCD to be addressed directly. A grid of rows and columns allows the transistors to be turned on or off just like the plasma cells, but without the need for high voltages or resetting pulse. At first these devices were difficult to produce, but as processes improved the printing methods developed from the semiconductor industry replaced the mechanical complexity of the PALC cell. PALC is no longer being actively developed. [4]

Description

A conventional LCD consists of a grid of individual LCD "cells" with red, green or blue (RGB) colored filters in front of them. A back light source, typically a fluorescent lamp or LED in modern systems, shines white light through the cells. By changing the opacity of the cells, differing quantities of RGB light are produced at any one triplet of cells, producing a single color as seen by the eye. The main problem with producing such a display is the need to individually address the enormous number of cells; in a modern high-definition television with a 1080p display, this requires 1080 rows of 1920 triplet cells per row, or 6,220,800 individual LCD cells.

PALC displays attempted to address this problem by introducing an intermediate area between the backlight and the LCD on top that used plasma techniques as a "switch". Instead of using individual cells, the display was arranged as a series of rows of LCDs, arranged in an RGB pattern. Beneath the LCD, and above the backlight, was a plasma display consisting of columns of anodes. A clear conductive cathode was positioned above every LCD row.

To produce a display, the system powered each row of the cathodes in turn, along with lit anodes in the plasma layer. This produced a field between the anodes in the columns and cathodes on the rows, producing individually addressed cells. A small amount of ionized gas is pushed towards the LCD in the cells that are powered, creating a small charged spot just below the LCD layer. This switches the LCD, and the amount of power controls the resulting opacity. Cells had to be "erased" to re-draw, by passing a high negative voltage through the cell to push the gas off the LCD layer.

Related Research Articles

<span class="mw-page-title-main">Computer monitor</span> Computer output device

A computer monitor is an output device that displays information in pictorial or textual form. A discrete monitor comprises a visual display, support electronics, power supply, housing, electrical connectors, and external user controls.

<span class="mw-page-title-main">Liquid-crystal display</span> Display that uses the light-modulating properties of liquid crystals

A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers. Liquid crystals do not emit light directly but instead use a backlight or reflector to produce images in color or monochrome.

<span class="mw-page-title-main">Vacuum tube</span> Device that controls current between electrodes

A vacuum tube, electron tube, valve, or tube, is a device that controls electric current flow in a high vacuum between electrodes to which an electric potential difference has been applied.

<span class="mw-page-title-main">Cold cathode</span> Type of electrode and part of cold cathode fluorescent lamp.

A cold cathode is a cathode that is not electrically heated by a filament. A cathode may be considered "cold" if it emits more electrons than can be supplied by thermionic emission alone. It is used in gas-discharge lamps, such as neon lamps, discharge tubes, and some types of vacuum tube. The other type of cathode is a hot cathode, which is heated by electric current passing through a filament. A cold cathode does not necessarily operate at a low temperature: it is often heated to its operating temperature by other methods, such as the current passing from the cathode into the gas.

<span class="mw-page-title-main">Plasma display</span> Type of flat-panel display

A plasma display panel (PDP) is a type of flat-panel display that uses small cells containing plasma: ionized gas that responds to electric fields. Plasma televisions were the first large flat-panel displays to be released to the public.

<span class="mw-page-title-main">Flat-panel display</span> Electronic display technology

A flat-panel display (FPD) is an electronic display used to display visual content such as text or images. It is present in consumer, medical, transportation, and industrial equipment.

<span class="mw-page-title-main">LCD projector</span> Type of video projector

An LCD projector is a type of video projector for displaying video, images or computer data on a screen or other flat surface. It is a modern equivalent of the slide projector or overhead projector. To display images, LCD projectors typically send light from a metal-halide lamp through a prism or series of dichroic filters that separates light to three polysilicon panels – one each for the red, green and blue components of the video signal. As polarized light passes through the panels, individual pixels can be opened to allow light to pass or closed to block the light. The combination of open and closed pixels can produce a wide range of colors and shades in the projected image.

<span class="mw-page-title-main">Display device</span> Output device for presentation of information in visual form

A display device is an output device for presentation of information in visual or tactile form. When the input information that is supplied has an electrical signal the display is called an electronic display.

A television set or television receiver is an electronic device for the purpose of viewing and hearing television broadcasts, or as a computer monitor. It combines a tuner, display, and loudspeakers. Introduced in the late 1920s in mechanical form, television sets became a popular consumer product after World War II in electronic form, using cathode ray tube (CRT) technology. The addition of color to broadcast television after 1953 further increased the popularity of television sets in the 1960s, and an outdoor antenna became a common feature of suburban homes. The ubiquitous television set became the display device for the first recorded media for consumer use in the 1970s, such as Betamax, VHS; these were later succeeded by DVD. It has been used as a display device since the first generation of home computers and dedicated video game consoles in the 1980s. By the early 2010s, flat-panel television incorporating liquid-crystal display (LCD) technology, especially LED-backlit LCD technology, largely replaced CRT and other display technologies. Modern flat panel TVs are typically capable of high-definition display and can also play content from a USB device. Starting in the late 2010s, most flat panel TVs began to offer 4K and 8K resolutions.

<span class="mw-page-title-main">LCD television</span> Television set with liquid-crystal display

A liquid-crystal-display television is a television set that uses a liquid-crystal display to produce images. It is by far the most widely produced and sold type of television display. LCD TVs are thin and light, but have some disadvantages compared to other display types such as high power consumption, poorer contrast ratio, and inferior color gamut.

<span class="mw-page-title-main">Field-emission display</span>

A field-emission display (FED) is a flat panel display technology that uses large-area field electron emission sources to provide electrons that strike colored phosphor to produce a color image. In a general sense, an FED consists of a matrix of cathode ray tubes, each tube producing a single sub-pixel, grouped in threes to form red-green-blue (RGB) pixels. FEDs combine the advantages of CRTs, namely their high contrast levels and very fast response times, with the packaging advantages of LCD and other flat-panel technologies. They also offer the possibility of requiring less power, about half that of an LCD system. FEDs can also be made transparent.

<span class="mw-page-title-main">Backlight</span> Form of illumination used in liquid crystal displays

A backlight is a form of illumination used in liquid-crystal displays (LCDs) that provides illumination from the back or side of a display panel. LCDs do not produce light by themselves, so they need illumination to produce a visible image. Backlights are often used in smartphones, computer monitors, and LCD televisions. They are used in small displays to increase readability in low light conditions such as in wristwatches. Typical sources of light for backlights include light-emitting diodes (LEDs) and cold cathode fluorescent lamps (CCFLs).

An output device is any piece of computer hardware that converts information or data into a human-perceptible form or, historically, into a physical machine-readable form for use with other non-computerized equipment. It can be text, graphics, tactile, audio, or video. Examples include monitors, printers, speakers, headphones, projectors, GPS devices, optical mark readers, and braille readers.

A thin-film-transistor liquid-crystal display is a type of liquid-crystal display that uses thin-film-transistor technology to improve image qualities such as addressability and contrast. A TFT LCD is an active matrix LCD, in contrast to passive matrix LCDs or simple, direct-driven LCDs with a few segments.

<span class="mw-page-title-main">Twisted nematic field effect</span> Type of thin-film-transistor liquid-crystal display technology

The twisted nematic effect (TN-effect) was a main technology breakthrough that made LCDs practical. Unlike earlier displays, TN-cells did not require a current to flow for operation and used low operating voltages suitable for use with batteries. The introduction of TN-effect displays led to their rapid expansion in the display field, quickly pushing out other common technologies like monolithic LEDs and CRTs for most electronics. By the 1990s, TN-effect LCDs were largely universal in portable electronics, although since then, many applications of LCDs adopted alternatives to the TN-effect such as in-plane switching (IPS) or vertical alignment (VA).

<span class="mw-page-title-main">Large-screen television technology</span> Technology rapidly developed in the late 1990s and 2000s

Large-screen television technology developed rapidly in the late 1990s and 2000s. Prior to the development of thin-screen technologies, rear-projection television was standard for larger displays, and jumbotron, a non-projection video display technology, was used at stadiums and concerts. Various thin-screen technologies are being developed, but only liquid crystal display (LCD), plasma display (PDP) and Digital Light Processing (DLP) have been publicly released. Recent technologies like organic light-emitting diode (OLED) as well as not-yet-released technologies like surface-conduction electron-emitter display (SED) or field emission display (FED) are in development to supersede earlier flat-screen technologies in picture quality.

Display motion blur, also called HDTV blur and LCD motion blur, refers to several visual artifacts that are frequently found on modern consumer high-definition television sets and flat panel displays for computers.

<span class="mw-page-title-main">Defective pixel</span>

A defective pixel is a pixel on a liquid crystal display (LCD) that is not functioning properly. The ISO standard ISO 13406-2 distinguishes between three different types of defective pixels, while hardware companies tend to have further distinguishing types.

<span class="mw-page-title-main">LED-backlit LCD</span> Display technology implementation

An LED-backlit LCD is a liquid-crystal display that uses LEDs for backlighting instead of traditional cold cathode fluorescent (CCFL) backlighting. LED-backlit displays use the same TFT LCD technologies as CCFL-backlit LCDs, but offer a variety of advantages over them.

Electrically operated display devices have developed from electromechanical systems for display of text, up to all-electronic devices capable of full-motion 3D color graphic displays. Electromagnetic devices, using a solenoid coil to control a visible flag or flap, were the earliest type, and were used for text displays such as stock market prices and arrival/departure display times. The cathode ray tube was the workhorse of text and video display technology for several decades until being displaced by plasma, liquid crystal (LCD), and solid-state devices such as thin-film transistors (TFTs), LEDs and OLEDs. With the advent of metal–oxide–semiconductor field-effect transistors (MOSFETs), integrated circuit (IC) chips, microprocessors, and microelectronic devices, many more individual picture elements ("pixels") could be incorporated into one display device, allowing graphic displays and video.

References

Notes

  1. Dennis Normile, "Liquid crystals meet plasma", Popular Science,Vol. 247, No. 4, page 50, Oct 1995, Bonnier Corporation ISSN 0161-7370, retrieved 14 March 2009.
  2. Discover, July 1996.
  3. PALC
  4. PALC

Bibliography

  • Thomas S. Buzak, "Switching pixels with gas", Information Display, Volume 6 Number 10 (October 1990), pp. 7–9
  • Itou Fukusaburou (et al.), "Plasma Addressed Liquid Crystal Display", Sharp Technical Journal, Volume 74 (28 May 1999), pp. 35–40
  • "PALC", Displays Glossary, Meko Ltd.
  • "TV's a Gas", 1996 Discover Awards: Sight Discover!, 1 July 1996

Patents

  • U.S. Patent 4,864,538, "Method and apparatus for addressing optical data storage locations", Thomas Buzak/Tektronix, filed 5 May 1988, issued 5 September 1989
  • U.S. Patent 5,036,317, "Flat panel apparatus for addressing optical data storage locations", Thomas Buzak/Tektronix, filed 22 August 1988, issued 30 July 1991

Further reading