 | |
| Industry | Electronics |
|---|---|
| Founded | 1976 |
| Headquarters | Santa Barbara, California |
| Products | desktop computer systems |
PolyMorphic Systems was a manufacturer of microcomputer boards and systems based on the S-100 bus. Their products included the Poly-88 and the System 8813. The company was incorporated in California in 1976 as Interactive Products Corporation d/b/a PolyMorphic Systems. It was initially based in Goleta, then Santa Barbara, California.
PolyMorphic Systems' first products were several interface boards based on the then-popular S-100 bus. These were compatible with other microcomputers such as the Altair 8800 and IMSAI 8080. The first was an A/D and D/A converter board. This was followed by a video terminal interface (VTI) card which became the primary display device for their systems. Later board-level products included CPU, RAM, and disk controller cards.
With the release of their CPU card, PolyMorphic began selling complete systems. Their first was the Poly-88, housed in a 5-slot S100 chassis, with additional side-mounted S-100 connectors for the purpose of joining chassis together. [1] This unit earned the nickname "orange toaster" due to its orange metal cover, and the fact that the S-100 cards generated noticeable heat. [2] The Poly-88 was available in kit form, or assembled. It was originally called the Micro-Altair, but after objections from MITS, manufacturers of the Altair, the name was changed. [3]
The Poly-88 board set consisted of the following:
The Poly-88 ROM contained a boot loader program, capable of reading programs from the cassette tape interface. Available programs included games, utilities, a BASIC interpreter, and an 8080 assembler.
PolyMorphic's disk-based system was the System 8813. It consisted of a larger chassis holding one, two, or three 51⁄4-inch minifloppy disk drives from Shugart Associates. The drives used single-sided, single-density storage on hard-sectored diskettes. Storage capacity was approximately 90K bytes per diskette.
System 8813 hardware included the standard CPU and VTI cards; a RAM card, typically with at least 32K of memory; and a disk controller card, to interface with the minifloppy drives. Later, a Z80 based disk controller supported double sided, double-density minifloppy drives, and full-size (8-inch) floppy drives.
The Poly disk operating system was called Exec. The three disk drives were distinguished by numbers enclosed in angle brackets such as <1>, rather than the drive letter convention (A:) used by CP/M and later MS-DOS. File names were case-sensitive and could contain up to 31 characters including a two-character extension. For example, a text file might be named Notes.TX.
Various file extensions had predefined meanings: .GO for executable files, .BS for BASIC programs, .OV for overlays. Overlays were used extensively to provide more code space for the operating system. If a file named INITIAL.TX was present when the system booted, commands listed in that file were executed automatically, similar to the AUTOEXEC.BAT file of an MS-DOS system.
Later versions of Exec supported subdirectories. The naming syntax continued to use angle brackets. For example, a file in a second-level subdirectory on drive 2 might be named <2<Projects<Dan<Accounts.TX. Unlike MS-DOS and Unix, no explicit "make directory" command was needed. When a program tried to create a file within a subdirectory, that subdirectory would be automatically created (if it didn't already exist).
System 8813 software included an 8080 macro assembler and a BASIC interpreter for program development. Poly BASIC used BCD arithmetic for high precision in financial applications. A word-processing system, named WordMaster, consisted of a text editor and separate formatter program. Stuart Woods wrote his second novel, Run Before the Wind , using WordMaster on a PolyMorphic 8813 system. [4]
With the introduction of double-sided, double density minifloppy drives, the storage capacity of a single floppy became approximately 360K bytes (the same as the original IBM-PC floppy drive capacity). This made it feasible to store Exec, applications and data on a single floppy. The System 8810 was functionally identical to the 8813, but in a smaller chassis, with 5 slots and only one minifloppy drive.
The 88/MS (Mass Storage) was a cabinet housing dual, 8-inch (full size) floppy drives. It was available with either single- or double-sided disk drives, both using double-density recording on hard-sectored media. The 88/MS could be added onto either an 8813 or 8810 system. The largest Poly configurations would contain three mini-floppy drives and four full-size drives, with drive numbers from 1 to 7.
The 88/HD was a subsystem with an 18 MB SASI hard drive, housed in an 8810 chassis. Software called Volume Manager partitioned the available space into several logical disk drives, similar to the FDISK partitioning command used by other operating systems. [5]
The TwinSystem was marketed as "Get more work done on a computer built for two." The System 8813 TwinSystem had an additional RAM card, video card, and keyboard. Bank switching between the RAM cards allowed the CPU to keep two applications in memory simultaneously. However, the TTL-level keyboard interface limited the distance between the two user stations to a few feet.
The dominant operating system for microcomputers in this era was CP/M. Unmodified Poly systems were unable to run CP/M, for several reasons:
Late in the system's lifetime, hardware modifications were introduced to solve the memory map issues, and a version of CP/M was released for the 8813.
The Aster CT-80, an early (1982) home/personal computer developed by the small Dutch company MCP, was sold in its first incarnation as a kit for hobbyists. Later it was sold ready to use. It consisted of several Eurocard PCB's with DIN 41612 connectors, and a backplane all based on a 19-inch rack configuration. It was the first commercially available Dutch personal/home computer. The Aster computer could use the software written for the popular Tandy TRS-80 computer while fixing many of the problems of that computer, but it could also run CP/M software, with a large amount of free memory Transient Program Area, (TPA) and a full 80×25 display, and it could be used as a Videotext terminal. Although the Aster was a clone of the TRS-80 Model I it was in fact more compatible with the TRS-80 Model III, and ran all the software of these systems including games. It also had a built in speaker which was compatible with such games software.
The Commodore 1581 is a 3½-inch double-sided double-density floppy disk drive that was released by Commodore Business Machines (CBM) in 1987, primarily for its C64 and C128 home/personal computers. The drive stores 800 kilobytes using an MFM encoding but formats different from the MS-DOS, Amiga, and Mac Plus formats. With special software it's possible to read C1581 disks on an x86 PC system, and likewise, read MS-DOS and other formats of disks in the C1581, provided that the PC or other floppy handles the "720 kB" size format. This capability was most frequently used to read MS-DOS disks. The drive was released in the summer of 1987 and quickly became popular with bulletin board system (BBS) operators and other users.
The TRS-80 Micro Computer System is a desktop microcomputer launched in 1977 and sold by Tandy Corporation through their Radio Shack stores. The name is an abbreviation of Tandy Radio Shack, Z80 [microprocessor]. It is one of the earliest mass-produced and mass-marketed retail home computers.
CP/M, originally standing for Control Program/Monitor and later Control Program for Microcomputers, is a mass-market operating system created in 1974 for Intel 8080/85-based microcomputers by Gary Kildall of Digital Research, Inc. Initially confined to single-tasking on 8-bit processors and no more than 64 kilobytes of memory, later versions of CP/M added multi-user variations and were migrated to 16-bit processors.
The Intel 8085 ("eighty-eighty-five") is an 8-bit microprocessor produced by Intel and introduced in March 1976. It is software-binary compatible with the more-famous Intel 8080 with only two minor instructions added to support its added interrupt and serial input/output features. However, it requires less support circuitry, allowing simpler and less expensive microcomputer systems to be built. The "5" in the part number highlighted the fact that the 8085 uses a single +5-volt (V) power supply by using depletion-mode transistors, rather than requiring the +5 V, −5 V and +12 V supplies needed by the 8080. This capability matched that of the competing Z80, a popular 8080-derived CPU introduced the year before. These processors could be used in computers running the CP/M operating system.
The MYCRO-1 was a microcomputer manufactured and sold by Mycron of Oslo, Norway. Built around the Intel 8080 CPU, it was one of the first commercial single-board computer after the Intel SDK-80. One is currently displayed at the Norwegian Museum of Science and Technology.
ProDOS is the name of two similar operating systems for the Apple II series of personal computers. The original ProDOS, renamed ProDOS 8 in version 1.2, is the last official operating system usable by all 8-bit Apple II series computers, and was distributed from 1983 to 1993. The other, ProDOS 16, was a stop-gap solution for the 16-bit Apple IIGS that was replaced by GS/OS within two years.
The Rainbow 100 is a microcomputer introduced by Digital Equipment Corporation (DEC) in 1982. This desktop unit had a monitor similar to the VT220 and a dual-CPU box with both 4 MHz Zilog Z80 and 4.81 MHz Intel 8088 CPUs. The Rainbow 100 was a triple-use machine: VT100 mode, 8-bit CP/M mode, and CP/M-86 or MS-DOS mode using the 8088.
Pertec Computer Corporation (PCC), formerly Peripheral Equipment Corporation (PEC), was a computer company based in Chatsworth, California which originally designed and manufactured peripherals such as floppy drives, tape drives, instrumentation control and other hardware for computers.
A floppy-disk controller (FDC) has evolved from a discrete set of components on one or more circuit boards to a special-purpose integrated circuit or a component thereof. An FDC directs and controls reading from and writing to a computer's floppy disk drive (FDD). The FDC is responsible for reading data presented from the host computer and converting it to the drive's on-disk format using one of a number of encoding schemes, like FM encoding or MFM encoding, and reading those formats and returning it to its original binary values.
Eagle Computer, Inc., was an early American computer company based in Los Gatos, California. Spun off from Audio-Visual Laboratories (AVL), it first sold a line of popular CP/M computers which were highly praised in the computer magazines of the day. After the IBM PC was launched, Eagle produced the Eagle 1600 series, which ran MS-DOS but were not true clones. When it became evident that the buying public wanted actual clones of the IBM PC, even if a non-clone had better features, Eagle responded with a line of clones, including a portable. The Eagle PCs were always rated highly in computer magazines.
The Sun386i is a discontinued hybrid UNIX workstation/PC compatible computer system produced by Sun Microsystems, launched in 1988. It is based on the Intel 80386 microprocessor but shares many features with the contemporary Sun-3 series systems.
The Z-89 is a personal computer produced by Zenith Data Systems (ZDS) in the early 1980s.
The Mac286 was an Intel 80286-based MS-DOS coprocessor expansion card for one of Apple Computer's first expandable Macintosh computers, the 1987 Macintosh II. It was developed by Phoenix Technologies under contract to Apple Computer and sold by AST Research in an effort to close the gap between the Macintosh and IBM PC computing worlds. AST also introduced the related Mac86 card for the Macintosh SE.
MSX-DOS is a discontinued disk operating system developed by Microsoft for the 8-bit home computer standard MSX, and is a cross between MS-DOS 1.25 and CP/M-80 2.
The Research Machines 380Z was an early 8-bit microcomputer produced by Research Machines in Oxford, England, from 1977 to 1985.
The Tandy 10 Business Computer System was a short-lived product developed by Radio Shack in the late 1970s as a business-oriented complement to their TRS-80 Model I desktop computer. Released in 1978, the Tandy 10 was built for Radio Shack by Applied Digital Data Systems (ADDS), and was only sold by Radio Shack's dedicated computer center stores.
ISIS, short for Intel System Implementation Supervisor, is an operating system for early Intel microprocessors like the 8080. It was originally developed by Ken Burgett and Jim Stein under the management of Steve Hanna and Terry Opdendyk for the Intel Microprocessor Development System with two 8" floppy drives, starting in 1975, and later adopted as ISIS-II as the operating system for the PL/M compiler, assembler, link editor, and In-Circuit Emulator. The ISIS operating system was developed on an early prototype of the MDS 800 computer, the same type of hardware that Gary Kildall used to develop CP/M.
Gnat Computers, Inc., was an American computer company based in San Diego, California, founded in 1976. The company was an early developer of microcomputers and one of the first to license the CP/M operating system from Digital Research. They released various computer hardware, including two microcomputer systems, before they were acquired by business partner Data Technology Industries in 1983.