Polyimine

Last updated

Polyimines are classified as polymer materials that contain imine groups, which are characterised by a double bond between a carbon and nitrogen atom. [1] The term polyimine can also be found occasionally in covalent organic frameworks (COFs). In (older) literature, polyimines are sometimes also referred to as poly(azomethine) or polyschiff.

Contents

Synthesis

Polyimines can be synthesised via a condensation reaction between aldehydes and (primary) amines. [2] During this reaction, water is also formed as byproduct. Often, the synthesis can be performed at room temperature, but to fully cure the materials and remove remaining water, they can be dried at slightly elevated temperatures and/or in vacuum.

Synthesis of a polyimine from terephthalaldehyde and cadaverine. Polyimine synthesis.png
Synthesis of a polyimine from terephthalaldehyde and cadaverine.

Applications

One of the applications of polyimines is as in covalent adaptable networks (CANs). These are polymer materials that are crosslinked via dynamic covalent bonds. Besides polyimines, other types of dynamic covalent chemistry can also be used. [3] Polyimine CANs are largely investigated to create recyclable and self-healing thermoset materials, [4] but they can also find use in composite materials with higher performance. [5]


Flame retardants

Because of the free radical scavanging properties of imines, [6] they are well fit to be used in flame retardant materials. In addition, different polyimine materials have also been investigated for which phosporous species have been incorporated. These materials represent more sustainable and less harmful alternatives to previously used halogenated polymers.

Sensory devices

The dynamic characteristics of polyimines enables them to be used as sensory devices. An example of this is the sensing of amine compounds. Polyimine materials have been constructed that enable penetration of (small) monoamine molecules. [7] These amines can perform bond exchange reactions with the polyimine network, and as a result reduce the crosslinking density. As a result, the materials soften or even liquify. The change in material properties provides a "read-out" of the presence of amines.

Electronic skin

Polyimines have been investigated for their use in the production of electronic skins (e-skin). [8] For this, Polyimine networks were doped with conductive silver nanoparticles. The malleability of the polyimine network enables the e-skin to conform to complex or uneven surfaces without introducing excessive interfacial stresses.

Bio-based polyimines

Various studies have been conducted to synthesise bio-based polyimines due the great natural abundance of aldehydes and amines. [9] Popular sources for aldehydes include vanilin, which can be obtained from lignin, or 2,5-furandicarboxaldehyde (FDC), which can be derived from fructose. [10]

Imines in other polymers

Apart from polyimine polymers that are formed directly via the condensation reaction from aldehydes and amines, it is also possible to incorporate imines in other existing polymer materials. Imines have, for example, been incorporated into recyclable epoxy-based thermosets [11] and polyesters. [12]

See also

Related Research Articles

<span class="mw-page-title-main">Thermosetting polymer</span> Polymer obtained by irreversibly hardening (curing) a resin

In materials science, a thermosetting polymer, often called a thermoset, is a polymer that is obtained by irreversibly hardening ("curing") a soft solid or viscous liquid prepolymer (resin). Curing is induced by heat or suitable radiation and may be promoted by high pressure or mixing with a catalyst. Heat is not necessarily applied externally, and is often generated by the reaction of the resin with a curing agent. Curing results in chemical reactions that create extensive cross-linking between polymer chains to produce an infusible and insoluble polymer network.

<span class="mw-page-title-main">Imine</span> Organic compound or functional group containing a C=N bond

In organic chemistry, an imine is a functional group or organic compound containing a carbon–nitrogen double bond. The nitrogen atom can be attached to a hydrogen or an organic group (R). The carbon atom has two additional single bonds. Imines are common in synthetic and naturally occurring compounds and they participate in many reactions.

Reductive amination is a form of amination that involves the conversion of a carbonyl group to an amine via an intermediate imine. The carbonyl group is most commonly a ketone or an aldehyde. It is a common method to make amines and is widely used in green chemistry since it can be done catalytically in one-pot under mild conditions. In biochemistry, dehydrogenase enzymes use reductive amination to produce the amino acid, glutamate. Additionally, there is ongoing research on alternative synthesis mechanisms with various metal catalysts which allow the reaction to be less energy taxing, and require milder reaction conditions. Investigation into biocatalysts, such as imine reductases, have allowed for higher selectivity in the reduction of chiral amines which is an important factor in pharmaceutical synthesis.

Dynamic covalent chemistry (DCvC) is a synthetic strategy employed by chemists to make complex molecular and supramolecular assemblies from discrete molecular building blocks. DCvC has allowed access to complex assemblies such as covalent organic frameworks, molecular knots, polymers, and novel macrocycles. Not to be confused with dynamic combinatorial chemistry, DCvC concerns only covalent bonding interactions. As such, it only encompasses a subset of supramolecular chemistries.

Salicylic aldehyde (2-hydroxybenzaldehyde) is an organic compound with the formula C6H4OH(CHO). Along with 3-hydroxybenzaldehyde and 4-hydroxybenzaldehyde, it is one of the three isomers of hydroxybenzaldehyde. This colorless oily liquid has a bitter almond odor at higher concentration. Salicylaldehyde is a precursor to coumarin and a variety of chelating agents.

<span class="mw-page-title-main">Self-healing material</span> Substances that can repair themselves

Self-healing materials are artificial or synthetically created substances that have the built-in ability to automatically repair damages to themselves without any external diagnosis of the problem or human intervention. Generally, materials will degrade over time due to fatigue, environmental conditions, or damage incurred during operation. Cracks and other types of damage on a microscopic level have been shown to change thermal, electrical, and acoustical properties of materials, and the propagation of cracks can lead to eventual failure of the material. In general, cracks are hard to detect at an early stage, and manual intervention is required for periodic inspections and repairs. In contrast, self-healing materials counter degradation through the initiation of a repair mechanism that responds to the micro-damage. Some self-healing materials are classed as smart structures, and can adapt to various environmental conditions according to their sensing and actuation properties.

Shape-memory polymers (SMPs) are polymeric smart materials that have the ability to return from a deformed state to their original (permanent) shape when induced by an external stimulus (trigger), such as temperature change.

In polymer chemistry and materials science, the term "polymer" refers to large molecules whose structure is composed of multiple repeating units. Supramolecular polymers are a new category of polymers that can potentially be used for material applications beyond the limits of conventional polymers. By definition, supramolecular polymers are polymeric arrays of monomeric units that are connected by reversible and highly directional secondary interactions–that is, non-covalent bonds. These non-covalent interactions include van der Waals interactions, hydrogen bonding, Coulomb or ionic interactions, π-π stacking, metal coordination, halogen bonding, chalcogen bonding, and host–guest interaction. The direction and strength of the interactions are precisely tuned so that the array of molecules behaves as a polymer in dilute and concentrated solution, as well as in the bulk.

<span class="mw-page-title-main">4,4'-Oxydianiline</span> Chemical compound

4,4′-Oxydianiline (ODA) is an organic compound with the formula O(C6H4NH2)2. It is an ether derivative of aniline. This colourless solid is a useful monomer and cross-linking agent for polymers, especially the polyimides, such as Kapton.

<span class="mw-page-title-main">Tris(2-aminoethyl)amine</span> Chemical compound

Tris(2-aminoethyl)amine is the organic compound with the formula N(CH2CH2NH2)3. This colourless liquid is soluble in water and is highly basic, consisting of a tertiary amine center and three pendant primary amine groups. Tris(2-aminoethyl)amine is commonly abbreviated as tren or TREN. It is used a crosslinking agent in the synthesis of polyimine networks and a tripodal ligand in coordination chemistry.

Covalent organic frameworks (COFs) are a class of porous polymers that form two- or three-dimensional structures through reactions between organic precursors resulting in strong, covalent bonds to afford porous, stable, and crystalline materials. COFs emerged as a field from the overarching domain of organic materials as researchers optimized both synthetic control and precursor selection. These improvements to coordination chemistry enabled non-porous and amorphous organic materials such as organic polymers to advance into the construction of porous, crystalline materials with rigid structures that granted exceptional material stability in a wide range of solvents and conditions. Through the development of reticular chemistry, precise synthetic control was achieved and resulted in ordered, nano-porous structures with highly preferential structural orientation and properties which could be synergistically enhanced and amplified. With judicious selection of COF secondary building units (SBUs), or precursors, the final structure could be predetermined, and modified with exceptional control enabling fine-tuning of emergent properties. This level of control facilitates the COF material to be designed, synthesized, and utilized in various applications, many times with metrics on scale or surpassing that of the current state-of-the-art approaches.

4,4′-Methylenedianiline (MDA) is an organic compound with the formula CH2(C6H4NH2)2. It is a colorless solid, although commercial samples can appear yellow or brown. It is produced on an industrial scale, mainly as a precursor to polyurethanes.

<span class="mw-page-title-main">Two-dimensional polymer</span>

A two-dimensional polymer (2DP) is a sheet-like monomolecular macromolecule consisting of laterally connected repeat units with end groups along all edges. This recent definition of 2DP is based on Hermann Staudinger's polymer concept from the 1920s. According to this, covalent long chain molecules ("Makromoleküle") do exist and are composed of a sequence of linearly connected repeat units and end groups at both termini.

Electronic skin refers to flexible, stretchable and self-healing electronics that are able to mimic functionalities of human or animal skin. The broad class of materials often contain sensing abilities that are intended to reproduce the capabilities of human skin to respond to environmental factors such as changes in heat and pressure.

Vitrimers are a class of plastics, which are derived from thermosetting polymers (thermosets) and are very similar to them. Vitrimers consist of molecular, covalent networks, which can change their topology by thermally activated bond-exchange reactions. At high temperatures, they can flow like viscoelastic liquids; at low temperatures, the bond-exchange reactions are immeasurably slow (frozen), and the Vitrimers behave like classical thermosets at this point. Vitrimers are strong glass formers. Their behavior opens new possibilities in the application of thermosets, such as a self-healing material or simple processibility in a wide temperature range.

<span class="mw-page-title-main">3,4-Epoxycyclohexylmethyl-3',4'-epoxycyclohexane carboxylate</span> Chemical compound

3,4-Epoxycyclohexylmethyl-3',4'-epoxycyclohexane carboxylate (ECC) is a cycloaliphatic epoxy resin which is used in many industrial applications. It reacts by cationic polymerization using thermolatent photoinitiators to form crosslinked insoluble thermosets. Formulations based on cycloaliphatic epoxy resins such as ECC are known to form by curing thermosets with high heat and chemical resistance and good adhesion.

2,6-Diformylpyridine is an organic compound with the formula C5H3N(CHO)2, and typically appears as a solid powder at room temperature. The molecule features formyl groups adjacent to the nitrogen of pyridine. The compound is prepared by oxidation of 2,6-dimethylpyridine.

Covalent adaptable networks (CANs) are a type of polymer material that closely resemble thermosetting polymers (thermosets). However, they are distinguished from thermosets by the incorporation of dynamic covalent chemistry into the polymer network. When a stimulus (for example heat, light, pH, ...) is applied to the material, these dynamic bonds become active and can be broken or exchanged with other pending functional groups, allowing the polymer network to change its topology. This introduces reshaping, (re)processing and recycling into thermoset-like materials.

<span class="mw-page-title-main">Terephthalaldehyde</span> Chemical compound

Terephthalaldehyde (TA) is an organic compound with the formula C6H4(CHO)2. It is one of three isomers of benzene dicarboxaldehyde, in which the aldehyde moieties are positioned in the para conformation on the benzene ring. Terephthalaldehyde appears as a white to beige solid, typically in the form of a powder. It is soluble in many organic solvents, such as alcohols (e.g., methanol or ethanol) and ethers (e.g., tetrahydrofuran or diethylether).

<span class="mw-page-title-main">2,5-Furandicarboxaldehyde</span> Chemical compound

2,5-Furandicarboxaldehyde (FDC) is an organic compound with the molecular formula C4H2O(CHO)2. It consists of a furan ring with aldehyde groups on the 2 and 5 position. It is therefore classified as a dialdehyde.

References

  1. Suematsu, K.; Nakamura, K.; Takeda, J. (1983). "Polyimine, a C=N Double Bond Containing Polymers: Synthesis and Properties". Polymer Journal. 15: 71–79. doi: 10.1295/polymj.15.71 .
  2. Belowich, M. E.; Stoddart, J. F. (2012). "Dynamic imine chemistry". Chemical Society Reviews. 41 (6): 2003–2024. doi:10.1039/C2CS15305J. PMID   22310886.
  3. García, F.; Smulders, M. M. J. (2016). "Dynamic Covalent Polymers". Journal of Polymer Science Part A: Polymer Chemistry. 54 (22): 3551–3577. Bibcode:2016JPoSA..54.3551G. doi:10.1002/pola.28260. PMC   5129565 . PMID   27917019.
  4. Schoustra, S. K.; Dijksman, J. A.; Zuilhof, H.; Smulders, M. M. J. (2021). "Molecular control over vitrimer-like mechanics – tuneable dynamic motifs based on the Hammett equation in polyimine materials". Chemical Science. 12 (1): 293–302. doi:10.1039/d0sc05458e. ISSN   2041-6520. PMC   8178953 . PMID   34163597.
  5. Taynton, Philip; Ni, Huangang; Zhu, Chengpu; Yu, Kai; Loob, Samuel; Jin, Yinghua; Qi, H. Jerry; Zhang, Wei (2016). "Repairable Woven Carbon Fiber Composites with Full Recyclability Enabled by Malleable Polyimine Networks". Advanced Materials. 28 (15): 2904–2909. Bibcode:2016AdM....28.2904T. doi:10.1002/adma.201505245. PMID   26875745. S2CID   205266065.
  6. Lei, Zhou Qiao; Xie, Pu; Rong, Min Zhi; Zhang, Ming Qiu (2015). "Catalyst-free dynamic exchange of aromatic Schiff base bonds and its application to self-healing and remolding of crosslinked polymers". Journal of Materials Chemistry A. 3 (39): 19662–19668. doi:10.1039/C5TA05788D.
  7. Kathan, M.; Jurissek, C.; Kovaříček, P.; Hecht, S. (2019). "Imine-based dynamic polymer networks as photoprogrammable amine sensing devices". Journal of Polymer Science Part A: Polymer Chemistry. 57 (24): 2378–2382. Bibcode:2019JPoSA..57.2378K. doi: 10.1002/pola.29518 .
  8. Zou, Z.; Zhu, C.; Li, Y.; Lei, X.; Zhang, W.; Xiao, J. (2018). "Rehealable, fully recyclable, and malleable electronic skin enabled by dynamic covalent thermoset nanocomposite". Science Advances. 4 (2): eaaq0508. Bibcode:2018SciA....4..508Z. doi: 10.1126/sciadv.aaq0508 . PMC   5817920 . PMID   29487912.
  9. Liguori, A.; Hakkarainen, M. (2022). "Designed from Biobased Materials for Recycling: Imine-Based Covalent Adaptable Networks". Macromolecular Rapid Communications. 43 (13): 2100816. doi: 10.1002/marc.202100816 . PMID   35080074. S2CID   246286003.
  10. Dhers, S.; Vantomme, G.; Avérous, L. (2019). "A fully bio-based polyimine vitrimer derived from fructose" (PDF). Green Chemistry. 21 (7): 1596–1601. doi:10.1039/C9GC00540D. S2CID   104336119.
  11. Zhao, S.; Abu-Omar, M. M. (2018). "Recyclable and Malleable Epoxy Thermoset Bearing Aromatic Imine Bonds". Macromolecules. 51 (23): 9816–9824. Bibcode:2018MaMol..51.9816Z. doi:10.1021/acs.macromol.8b01976. S2CID   104433836.
  12. Snyder, R. L.; Lidston, C. A. L.; De Hoe, G. X.; Parvulescu, M. J. S.; Hillmyer, M. A.; Coates, G. W. (2020). "Mechanically robust and reprocessable imine exchange networks from modular polyester pre-polymers". Polymer Chemistry. 11 (33): 5346–5355. doi:10.1039/C9PY01957J. OSTI   1770322. S2CID   214152050.