Vitrimers

Last updated

Vitrimers are a class of plastics, which are derived from thermosetting polymers (thermosets) and are very similar to them. Vitrimers consist of molecular, covalent networks, which can change their topology by thermally activated bond-exchange reactions. At high temperatures they can flow like viscoelastic liquids, at low temperatures the bond-exchange reactions are immeasurably slow (frozen) and the Vitrimers behave like classical thermosets at this point. Vitrimers are strong glass formers. Their behavior opens new possibilities in the application of thermosets like as a self-healing material or simple processibility in a wide temperature range. [1] [2] [3]

Contents

Besides epoxy resins based on diglycidyl ether of bisphenol A, other polymer networks have been used to produce vitrimers, such as aromatic polyesters, [4] [5] polylactic acid (polylactide), [2] polyhydroxyurethanes, [3] epoxidized soybean oil with citric acid [6] and polybutadiene. [7] Vitrimers were termed as such in the early 2010s by French researcher Ludwik Leibler, from the CNRS. [8]

Background and significance

Thermoplastics are easy to process, but corrode easily by chemicals and mechanical stress, while the opposite is true of thermosets. These differences arise from how the polymer chains are held together.

Historically, thermoset polymer systems that were processable by virtue of topology changes within the covalent networks as mediated by bond exchange reactions were also developed by James Economy’s group at UIUC in the 1990s [4] [5] including consolidation of thermoset composite laminae. [9] As well, the Economy group conducted studies employing secondary ion mass spectrometry (SIMS) on deuterated and undeuterated fully cured vitrimer layers to discriminate the length scales (<50 nm) for physical interdiffusion between vitrimers constituent atoms – providing evidence towards eliminating physical interdiffusion of the polymer chains as the governing mechanism for bonding between vitrimer layers. [10]

Thermoplastics are made of covalent bond molecule chains, which are held together by weak interactions (e.g., van der Waals forces). The weak intermolecular interactions lead to easy processing by melting (or in some cases also from solution), but also make the polymer susceptible to solvent degradation and to creep under constant load. Thermoplastics can be deformed reversibly above their glass-transition temperature or their crystalline melting point and be processed by extrusion, injection molding, and welding.

Thermosets, on the other hand, are made of molecular chains which are interconnected by covalent bonds to form a stable network. Thus, they have outstanding mechanical properties and thermal and chemical resistance. They are an indispensable part of structural components in automotive and aircraft industries. Due to their irreversible linking by covalent bonds, molding is not possible once the polymerization is completed. Therefore, they must be polymerized in the desired shape, which is time-consuming, restricts the shape and is responsible for their high price. [11]

Given this, if the chains can be held together with reversible, strong covalent bonds, the resultant polymer would have the advantages of both thermoplastics and thermosets, including high processability, repairability, and performance. Vitrimers combine the desirable properties of both classes: they have the mechanical and thermal properties of thermosets and can be also molded under the influence of heat. Vitrimers can be welded like silicon glasses or metals. Welding by simple heating allows the creation of complex objects. [10] [12] Vitrimers could thus be a new and promising class of materials with many uses. [13]

The term vitrimer was created by the French researcher Ludwik Leibler, head of laboratory at CNRS, France's national research institute. [14] In 2011, Leibler and co-workers developed silica-like networks using the well-established transesterification reaction of epoxy and fatty dicarboxylic or tricarboxylic acids. [11] The synthesized networks have both hydroxyl and ester groups, which undergo exchange reactions (transesterifications) at high temperatures, resulting in the ability of stress relaxation and malleability of the material. On the other hand, the exchange reactions are suppressed to a great extent when the networks are cooled down, leading to a behavior like a soft solid. This whole process is based only on exchange reactions, which is the main difference from that of thermoplastics.

Functional principle

Glass and glass former

If the melt of an (organic) amorphous polymer is cooled down, it solidifies at the glass-transition temperature Tg. On cooling, the hardness of the polymer increases in the neighborhood of Tg by several orders of magnitude. This hardening follows the Williams-Landel-Ferry equation, not the Arrhenius equation. Organic polymers are thus called fragile glass formers. Silicon glass (e.g., window glass), is in contrast labelled as a strong glass former. Its viscosity changes only very slowly in the vicinity of the glass-transition point Tg and follows the Arrhenius law. This is what permits glassblowing. If one would try to shape an organic polymer in the same manner as glass, it would at first firmly and fully liquefy very slightly above Tg. For a theoretical glassblowing of organic polymers, the temperature must be controlled very precisely.

Until 2010, no organic strong glass formers were known. Strong glass formers can be shaped in the same way as glass (silicon dioxide) can be. Vitrimers are the first such material discovered, which can behave like viscoelastic fluid at high temperatures. Unlike classical polymer melts, whose flow properties are largely dependent on friction between monomers, vitrimers become a viscoelastic fluid because of exchange reactions at high temperatures as well as monomer friction. [11] These two processes have different activation energies, resulting in a wide range of viscosity variation. Moreover, because the exchange reactions follow Arrhenius' Law, the change of viscosity of vitrimers also follows an Arrhenius relationship with the increase of temperature, differing greatly from conventional organic polymers.

Effect of transesterification and temperature influence

The research group led by Ludwik Leibler demonstrated the operating principle of vitrimers at the example of epoxy thermosets. Epoxy thermosets can be represented as vitrimers, when transesterification reactions can be introduced and controlled. In the studied system, carboxylic acids or carboxylic acid anhydrides must be used as hardeners. [13] A topology change is possible by transesterification reactions which do not affect the number of links or the (average) functionality of the polymer, meaning that neither the decomposition of polymer linkages nor the decrease of integrity of polymers happens when transesterification reactions take place. Thus, the polymer can flow like a viscoelastic liquid at high temperatures. During the cooling phase, the transesterification reactions are slowed down, until they finally freeze (be immeasurably slow). Below this point vitrimers behave like normal, classical thermosets. The shown case-study polymers showed an elastic modulus of 1 MPa to 100 MPa, depending on the bonding network density.

The concentration of ester groups in vitrimers is shown to have a huge influence on the rate of transesterification reactions. In the work done by Hillmyer, et al., about polyactide vitrimers, they demonstrated that the more ester groups present in the polymer, the faster the rates of relaxation will be, leading to better self-healing performance. [2] Polyactide vitrimers which are synthesized by cross linking reactions of hydroxylterminated 4-arm star-shaped poly((±)-lactide) (HTSPLA) and methylenediphenyl diisocyanate (MDI) with the presence of cross-linking and transesterification catalyst stannous(II) octoate [Sn(Oct)2], have many more ester groups than all previous vitrimers; therefore, this material has a significantly high stress relaxing rate compared to other polyester based vitrimer systems.

Applications

There are many uses imaginable on this basis. A surfboard of vitrimers could be brought into a new shape, scratches on a car body could be cured and cross-linked plastic or synthetic rubber items could be welded. Vitrimers which are prepared from metathesis of dioxaborolanes with different polymers that are commercially available, can have both good processibility and outstanding performance such as mechanical, thermal, and chemical resistance. [15] [16] The polymers that can be utilized in such methodology range from poly(methylmethacrylate), polyimine, polystyrene, to polyethylene with high density and cross-linked robust structures, which makes this preparative method of vitrimers able to be applied to a wide range of industries. Recent NASA-funded work on reversible adhesives for in-space assembly has used a high performance vitrimer system called aromatic thermosetting copolyester (ATSP) as the basis for coatings and composites reversibly bondable in the solid state – providing new possibilities for the assembly of large, complex structures for space exploration and development. [17] [18] Start-up Mallinda Inc claims to have applications across the composites market from wind energy, sporting goods, automotive, aerospace, marine, and carbon fiber reinforced pressure vessels among others.

Related Research Articles

<span class="mw-page-title-main">Polymer</span> Substance composed of macromolecules with repeating structural units

A polymer is a substance or material consisting of very large molecules called macromolecules, composed of many repeating subunits. Due to their broad spectrum of properties, both synthetic and natural polymers play essential and ubiquitous roles in everyday life. Polymers range from familiar synthetic plastics such as polystyrene to natural biopolymers such as DNA and proteins that are fundamental to biological structure and function. Polymers, both natural and synthetic, are created via polymerization of many small molecules, known as monomers. Their consequently large molecular mass, relative to small molecule compounds, produces unique physical properties including toughness, high elasticity, viscoelasticity, and a tendency to form amorphous and semicrystalline structures rather than crystals.

<span class="mw-page-title-main">Polyurethane</span> Polymer composed of a chain of organic units joined by carbamate (urethane) links

Polyurethane refers to a class of polymers composed of organic units joined by carbamate (urethane) links. In contrast to other common polymers such as polyethylene and polystyrene, polyurethane is produced from a wide range of starting materials. This chemical variety produces polyurethanes with different chemical structures leading to many different applications. These include rigid and flexible foams, and coatings, adhesives, electrical potting compounds, and fibers such as spandex and polyurethane laminate (PUL). Foams are the largest application accounting for 67% of all polyurethane produced in 2016.

<span class="mw-page-title-main">Thermoplastic</span> Plastic that softens with heat and hardens on cooling

A thermoplastic, or thermosoftening plastic, is any plastic polymer material that becomes pliable or moldable at a certain elevated temperature and solidifies upon cooling.

<span class="mw-page-title-main">Epoxy</span> Type of material

Epoxy is the family of basic components or cured end products of epoxy resins. Epoxy resins, also known as polyepoxides, are a class of reactive prepolymers and polymers which contain epoxide groups. The epoxide functional group is also collectively called epoxy. The IUPAC name for an epoxide group is an oxirane.

<span class="mw-page-title-main">Thermosetting polymer</span> Polymer obtained by irreversibly hardening (curing) a resin

In materials science, a thermosetting polymer, often called a thermoset, is a polymer that is obtained by irreversibly hardening ("curing") a soft solid or viscous liquid prepolymer (resin). Curing is induced by heat or suitable radiation and may be promoted by high pressure or mixing with a catalyst. Heat is not necessarily applied externally, and is often generated by the reaction of the resin with a curing agent. Curing results in chemical reactions that create extensive cross-linking between polymer chains to produce an infusible and insoluble polymer network.

<span class="mw-page-title-main">Phenol formaldehyde resin</span> Chemical compound

Phenol formaldehyde resins (PF) are synthetic polymers obtained by the reaction of phenol or substituted phenol with formaldehyde. Used as the basis for Bakelite, PFs were the first commercial synthetic resins (plastics). They have been widely used for the production of molded products including billiard balls, laboratory countertops, and as coatings and adhesives. They were at one time the primary material used for the production of circuit boards but have been largely replaced with epoxy resins and fiberglass cloth, as with fire-resistant FR-4 circuit board materials.

Polymer chemistry is a sub-discipline of chemistry that focuses on the structures of chemicals, chemical synthesis, and chemical and physical properties of polymers and macromolecules. The principles and methods used within polymer chemistry are also applicable through a wide range of other chemistry sub-disciplines like organic chemistry, analytical chemistry, and physical chemistry. Many materials have polymeric structures, from fully inorganic metals and ceramics to DNA and other biological molecules. However, polymer chemistry is typically related to synthetic and organic compositions. Synthetic polymers are ubiquitous in commercial materials and products in everyday use, such as plastics, and rubbers, and are major components of composite materials. Polymer chemistry can also be included in the broader fields of polymer science or even nanotechnology, both of which can be described as encompassing polymer physics and polymer engineering.

<span class="mw-page-title-main">Cross-link</span> Bonds linking one polymer chain to another

In chemistry and biology a cross-link is a bond or a short sequence of bonds that links one polymer chain to another. These links may take the form of covalent bonds or ionic bonds and the polymers can be either synthetic polymers or natural polymers.

<span class="mw-page-title-main">Organic peroxides</span> Organic compounds of the form R–O–O–R’

In organic chemistry, organic peroxides are organic compounds containing the peroxide functional group. If the R′ is hydrogen, the compounds are called hydroperoxides, which are discussed in that article. The O−O bond of peroxides easily breaks, producing free radicals of the form RO•. Thus, organic peroxides are useful as initiators for some types of polymerization, such as the acrylic, unsaturated polyester, and vinyl ester resins used in glass-reinforced plastics. MEKP and benzoyl peroxide are commonly used for this purpose. However, the same property also means that organic peroxides can explosively combust. Organic peroxides, like their inorganic counterparts, are often powerful bleaching agents.

<span class="mw-page-title-main">Branching (polymer chemistry)</span> Attachment of side chains to the backbone chain of a polymer

In polymer chemistry, branching is the regular or irregular attachment of side chains to a polymer's backbone chain. It occurs by the replacement of a substituent on a monomer subunit by another covalently-bonded chain of that polymer; or, in the case of a graft copolymer, by a chain of another type. Branched polymers have more compact and symmetrical molecular conformations, and exhibit intra-heterogeneous dynamical behavior with respect to the unbranched polymers. In crosslinking rubber by vulcanization, short sulfur branches link polyisoprene chains into a multiple-branched thermosetting elastomer. Rubber can also be so completely vulcanized that it becomes a rigid solid, so hard it can be used as the bit in a smoking pipe. Polycarbonate chains can be crosslinked to form the hardest, most impact-resistant thermosetting plastic, used in safety glasses.

<span class="mw-page-title-main">Polyester</span> Category of polymers, in which the monomers are joined together by ester links

Polyester is a category of polymers that contain the ester functional group in every repeat unit of their main chain. As a specific material, it most commonly refers to a type called polyethylene terephthalate (PET). Polyesters include naturally occurring chemicals, such as in plants and insects, as well as synthetics such as polybutyrate. Natural polyesters and a few synthetic ones are biodegradable, but most synthetic polyesters are not. Synthetic polyesters are used extensively in clothing.

Thermoplastic elastomers (TPE), sometimes referred to as thermoplastic rubbers (TPR), are a class of copolymers or a physical mix of polymers that consist of materials with both thermoplastic and elastomeric properties.

<span class="mw-page-title-main">Self-healing material</span> Substances that can repair themselves

Self-healing materials are artificial or synthetically created substances that have the built-in ability to automatically repair damages to themselves without any external diagnosis of the problem or human intervention. Generally, materials will degrade over time due to fatigue, environmental conditions, or damage incurred during operation. Cracks and other types of damage on a microscopic level have been shown to change thermal, electrical, and acoustical properties of materials, and the propagation of cracks can lead to eventual failure of the material. In general, cracks are hard to detect at an early stage, and manual intervention is required for periodic inspections and repairs. In contrast, self-healing materials counter degradation through the initiation of a repair mechanism that responds to the micro-damage. Some self-healing materials are classed as smart structures, and can adapt to various environmental conditions according to their sensing and actuation properties.

Polymer engineering is generally an engineering field that designs, analyses, and modifies polymer materials. Polymer engineering covers aspects of the petrochemical industry, polymerization, structure and characterization of polymers, properties of polymers, compounding and processing of polymers and description of major polymers, structure property relations and applications.

Smart rubber is a polymeric material that is able to "heal" when torn. Near room temperature this process is reversible and can be cycled several times. Supramolecular self-healing rubber can be processed, re-used, and ultimately recycled. The edges of a tear can be held together, and they will simply re-bond into apparent solidity. This is done by utilizing a hydrogen-bonding polymer, rather than producing a material whose structure would depend on covalent bonding and ionic bonding between chains, which is typical of normal rubber. In this case hydrogen bonding can occur simply by pressing two faces of the substance together, allowing the recovery of a continuous hydrogen bonding network.

A thermoset polymer matrix is a synthetic polymer reinforcement where polymers act as binder or matrix to secure in place incorporated particulates, fibres or other reinforcements. They were first developed for structural applications, such as glass-reinforced plastic radar domes on aircraft and graphite-epoxy payload bay doors on the Space Shuttle.

<span class="mw-page-title-main">Off-stoichiometry thiol-ene polymer</span>

An off-stoichiometry thiol-ene polymer is a polymer platform comprising off-stoichiometry thiol-enes (OSTE) and off-stoichiometry thiol-ene-epoxies (OSTE+).

In materials science, a polymer matrix composite (PMC) is a composite material composed of a variety of short or continuous fibers bound together by a matrix of organic polymers. PMCs are designed to transfer loads between fibers of a matrix. Some of the advantages with PMCs include their light weight, high resistance to abrasion and corrosion, and high stiffness and strength along the direction of their reinforcements.

Covalent adaptable networks (CANs) are a type of polymer material that closely resemble thermosetting polymers (thermosets). However, they are distinguished from thermosets by the incorporation of dynamic covalent chemistry into the polymer network. When a stimulus (for example heat, light, pH, ...) is applied to the material, these dynamic bonds become active and can be broken or exchanged with other pending functional groups, allowing the polymer network to change its topology. This introduces reshaping, (re)processing and recycling into thermoset-like materials.

Polyimines are classified as polymer materials that contain imine groups, which are characterised by a double bond between a carbon and nitrogen atom. The term polyimine can also be found occasionally in covalent organic frameworks (COFs). In (older) literature, polyimines are sometimes also referred to as poly(azomethine) or polyschiff.

References

  1. ↑ Capelot, Mathieu; Miriam M. Unterlass; François Tournilhac; Ludwik Leibler (2012). "Catalytic Control of the Vitrimer Glass Transition". ACS Macro Letters. 1 (7): 789–792. doi:10.1021/mz300239f. PMID   35607118.
  2. 1 2 3 Brutman, Jacob P.; Delgado, Paula A.; Hillmyer, Marc A. (2014). "Polylactide Vitrimers". ACS Macro Letters. 3 (7): 607–610. doi: 10.1021/mz500269w . PMID   35590755.
  3. 1 2 Fortman, David J.; Brutman, Jacob P.; Cramer, Christopher J.; Hillmyer, Marc A.; Dichtel, William R. (2015). "Mechanically Activated, Catalyst-Free Polyhydroxyurethane Vitrimers". Journal of the American Chemical Society. 137 (44): 14019–14022. doi: 10.1021/jacs.5b08084 . PMID   26495769.
  4. 1 2 Frich, Dan; Goranov, Konstantin; Schneggenburger, Lizabeth; Economy, James (1996-01-01). "Novel High-Temperature Aromatic Copolyester Thermosets: Synthesis, Characterization, and Physical Properties". Macromolecules. 29 (24): 7734–7739. Bibcode:1996MaMol..29.7734F. doi:10.1021/ma960862d. ISSN   0024-9297.
  5. 1 2 Frich, Dan; Economy, James; Goranov, Konstantin (1997). "Aromatic copolyester thermosets: High temperature adhesive properties". Polymer Engineering & Science. 37 (3): 541–548. doi:10.1002/pen.11697. ISSN   1548-2634.
  6. ↑ Altuna, Facundo (2013). "Self-healable polymer networks based on the crosslinking of epoxidized soybean oil by an aqueous citric acid solution". Green Chemistry. 15 (12): 3360. doi:10.1039/C3GC41384E. hdl: 11336/2763 .
  7. ↑ Lu, Yi-Xuan (2012). "Making Insoluble Polymer Networks Malleable via Olefin Metathesis". Journal of the American Chemical Society. 134 (20): 8424–8427. doi:10.1021/ja303356z. PMID   22568481.
  8. ↑ "Ludwik Leibler, inventeur européen de l'année". CNRS Le journal (in French). Retrieved 2019-10-24.
  9. ↑ López, Alfonso; Economy, James (2001). "Solid state bonding of graphite/thermoset composites via interchain transesterification reaction (ITR)". Polymer Composites. 22 (3): 444–449. doi:10.1002/pc.10550. ISSN   1548-0569.
  10. 1 2 Frich, Dan; Hall, Allen; Economy, James (1998). "Nature of adhesive bonding via interchain transesterification reactions (ITR)". Macromolecular Chemistry and Physics. 199 (5): 913–921. doi:10.1002/(SICI)1521-3935(19980501)199:5<913::AID-MACP913>3.0.CO;2-3. ISSN   1521-3935.
  11. 1 2 3 Montarnal, Damien; Mathieu Capelot; François Tournilhac; Ludwik Leibler (November 2011). "Silica-Like Malleable Materials from Permanent Organic Networks". Science. 334 (6058): 965–968. Bibcode:2011Sci...334..965M. doi:10.1126/science.1212648. PMID   22096195. S2CID   206536931.
  12. ↑ Zhang, Jing; Demas, Nicholaos G.; Polycarpou, Andreas A.; Economy, James (2008). "A new family of low wear, low coefficient of friction polymer blend based on polytetrafluoroethylene and an aromatic thermosetting polyester". Polymers for Advanced Technologies. 19 (8): 1105–1112. doi:10.1002/pat.1086. ISSN   1099-1581.
  13. 1 2 Capelot, Mathieu; Damien Montarnal; François Tournilhac; Ludwik Leibler (2012). "Metal-catalyzed transesterification for healing and assembling of thermosets". J. Am. Chem. Soc. 134 (18): 7664–7667. doi:10.1021/ja302894k. PMID   22537278.
  14. ↑ Futura. "Grâce au vitrimère, Ludwik Leibler reçoit le prix de l'inventeur européen". Futura (in French). Retrieved 2019-10-24.
  15. ↑ Röttger, Max; Domenech, Trystan; Weegen, Rob van der; Breuillac, Antoine; Nicolaÿ, Renaud; Leibler, Ludwik (2017-04-07). "High-performance vitrimers from commodity thermoplastics through dioxaborolane metathesis". Science. 356 (6333): 62–65. Bibcode:2017Sci...356...62R. doi:10.1126/science.aah5281. ISSN   0036-8075. PMID   28386008. S2CID   26003021.
  16. ↑ Lei, Qunli; Xia, Xiuyang; Yang, Juan; Pica Ciamarra, Massimo; Ni, Ran (2020-10-21). "Entropy-controlled cross-linking in linker-mediated vitrimers". Proc. Natl. Acad. Sci. USA. 117 (44): 27111–27115. arXiv: 2007.06807 . Bibcode:2020PNAS..11727111L. doi: 10.1073/pnas.2015672117 . ISSN   1091-6490. PMC   7959506 . PMID   33087578.
  17. ↑ "Designing Rebondable Structural Adhesives". www.adhesivesmag.com. Retrieved 2019-12-18.
  18. ↑ Meyer, Jacob L.; Bakir, Mete; Lan, Pixiang; Economy, James; Jasiuk, Iwona; Bonhomme, Gaëtan; Polycarpou, Andreas A. (2019). "Reversible Bonding of Aromatic Thermosetting Copolyesters for In-Space Assembly". Macromolecular Materials and Engineering. 304 (4): 1800647. doi: 10.1002/mame.201800647 . ISSN   1439-2054.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.