This article includes a list of general references, but it lacks sufficient corresponding inline citations .(September 2021) |
Role | Unmanned aerial vehicle for civilian and military use |
---|---|
Manufacturer | Primoco UAV SE, Czech Republic |
First flight | 31 July 2015 |
Status | In service |
Number built | 200 as of 2024 |
Primoco UAV is an unmanned aerial vehicle for civil and military use, designed and manufactured in the Czech Republic. The first flight took place on 31 July 2015 and the UAV One 100 entered serial production in January 2016. In 2020, the manufacturer released an upgraded version of the One 150, which features higher engine power and better flight characteristics.
The Primoco UAV One 150 is a single-hull mid-wing with twin vertical tail surfaces. In the rear part of the fuselage there is a four-cylinder, four-stroke internal combustion engine of 340 cm³ capacity with propeller in a pusher arrangement. The unmanned aircraft is also equipped with an autopilot (control system), on-board electronics and payload, which is specified according to customer needs. Primoco UAV One has short take-off and landing capability (STOL).The aircraft is mainly constructed of carbon and glass composites. It uses a fixed three-wheel nose landing gear for take-off and landing. It is operated by one pilot and one tracking system operator.
The Primoco UAV One 150 UAV received an EASA Light Unmanned Certificate (LUC) in February 2022 and the manufacturer is completing certification to military standards NATO STANAG 4703.
The primary use of Primoco UAVs is in civilian air operations, border and coastal protection, oil and gas pipeline monitoring and calibration of airport radio beacons ILS/VOR/NDB/DME. They are also used in reconnaissance and training military missions. By the end of 2024, a total of 200 Primoco UAVs have been produced and they are used in four continents.
The aircraft manufacturer, Czech company Primoco UAV SE, has been publicly traded on the Prague Stock Exchange (Ticker Xetra PRIUA) since October 2018. The primary subscription of the company's shares raised CZK 63 million. In May 2021, the company successfully subscribed for new shares on the Start market and raised an additional CZK 90 million from investors. The free float thus rose to 22%. The majority owner of the company is its founder and CEO Ladislav Semetkovský, who holds 50% of the shares.
Since February 2019, Primoco UAV owns and operates Písek Krašovice Airport (ICAO LKPISK).
The UAV is operated from a Ground Control Station with a pilot and a flight operator. It can be manually controlled or run in fully automatic mode, where pre-programmed waypoints allow automatic takeoff, flight and landing. The aircraft also has additional safety modes which allow it to return to base or land in a safe area if communications are lost or faults occur.
The UAV has an S (ADSB IN/OUT) mode transponder which allows its flight path to be integrated into normal civilian airspace without special authorization. The equipment and aircraft can be transported in a light van..
Secure communications via radio or satellite Starlink connections are built in for continuous transmission of video and sensor readings to a ground station. Onboard sensors include Infra-Red cameras, Optical cameras, Radar/Lidar and others to the operator's requirements.
An unmanned aerial vehicle (UAV), or unmanned aircraft system (UAS), commonly known as a drone, is an aircraft with no human pilot, crew, or passengers onboard. UAVs were originally developed through the twentieth century for military missions too "dull, dirty or dangerous" for humans, and by the twenty-first, they had become essential assets to most militaries. As control technologies improved and costs fell, their use expanded to many non-military applications. These include aerial photography, area coverage, precision agriculture, forest fire monitoring, river monitoring, environmental monitoring, weather observation, policing and surveillance, infrastructure inspections, smuggling, product deliveries, entertainment, and drone racing.
Aerial photography is the taking of photographs from an aircraft or other airborne platforms. When taking motion pictures, it is also known as aerial videography.
AeroVironment, Inc. is an American defense contractor headquartered in Arlington, Virginia, that designs and manufactures unmanned aerial vehicles (UAVs). Paul B. MacCready Jr., a designer of human-powered aircraft, founded the company in 1971. The company is best known for its lightweight human-powered and solar-powered vehicles. The company is the US military's top supplier of small drones —notably the Raven, Switchblade, Wasp and Puma models.
The Boeing Insitu ScanEagle is a small, long-endurance, low-altitude unmanned surveillance and reconnaissance aerial vehicle built by Insitu, a subsidiary of Boeing, and is used for reconnaissance. The ScanEagle was designed by Insitu based on the Insitu SeaScan, a commercial UAV that was intended for fish-spotting. The ScanEagle continues to receive improvements through upgrades and changes.
Unmanned aerial vehicles (UAVs) include both autonomous drones and remotely piloted vehicles (RPVs). A UAV is capable of controlled, sustained level flight and is powered by a jet, reciprocating, or electric engine. In the twenty-first century, technology reached a point of sophistication that the UAV is now being given a greatly expanded role in many areas of aviation.
The AeroVironment RQ-11 Raven is a small hand-launched remote-controlled unmanned aerial vehicle developed for the United States military, but now adopted by the military forces of many other countries.
The TAI Anka is a family of unmanned aerial vehicles developed by Turkish Aerospace Industries primarily for the Turkish Air Force. Envisioned in the early 2000s for aerial surveillance and reconnaissance missions, Anka has evolved into a modular platform with synthetic-aperture radar, precise weapons and satellite communication.
First-person view (FPV), also known as remote-person view (RPV), or video piloting, is a method used to control a radio-controlled vehicle from the driver or pilot's viewpoint. Most commonly it is used to pilot a radio-controlled aircraft or other type of unmanned aerial vehicle (UAV) such as a military drone. The operator gets a first-person perspective from an onboard camera that feeds video to FPV goggles or a monitor. More sophisticated setups include a pan-and-tilt gimbaled camera controlled by a gyroscope sensor in the pilot's goggles and with dual onboard cameras, enabling a true stereoscopic view.
The Prioria Robotics Maveric is a discontinued unmanned aerial vehicle (UAV) marketed as a high-performance, next-generation platform for small and miniature UAV operations. Maveric's bendable wings allow for the ability to store a fully assembled airframe in a 6-inch (150 mm) tube.
The Boeing Phantom Eye is a high altitude, long endurance (HALE) liquid hydrogen-powered unmanned aerial vehicle developed by Boeing Phantom Works. The aircraft was Boeing's proposal to meet the demand from the US military for unmanned drones designed to provide advanced intelligence and reconnaissance work, driven by the combat conditions in Afghanistan in particular. In August 2016, the Phantom Eye demonstrator was disassembled for display at the Air Force Flight Test Museum.
Air-to-ground communication was first made possible by the development of two-way aerial telegraphy in 1912, soon followed by two-way radio. By the Second World War, radio had become the chief medium of air-to-ground and air-to-air communication. Since then, transponders have enabled pilots and controllers to identify planes automatically, greatly improving air security. Most recently, in addition to sophisticated radio and GPS systems, the unmanned aerial vehicle, or drone, has revolutionised aerial surveillance and combat.
The AeroVironment RQ-20 Puma is an American unmanned aircraft system which is small, battery powered, and hand-launched. Its primary mission is surveillance and intelligence gathering using an electro-optical and infrared camera. It is produced by AeroVironment.
HAL RUAV-200 is an unmanned rotorcraft project being developed by Hindustan Aeronautics Limited for the Indian Army and the Indian Navy.
The GIDS Uqab is a tactical unmanned reconnaissance aerial vehicle built and developed by the Global Industrial Defence Solutions (GIDS) for the joint drone program of the Pakistan Navy and Pakistan Army. The Uqab is a tactical system which can be used for damage assessment, reconnaissance operations, artillery fire corrections, and can perform other variety of security and military operations.
AirStrato is a solar powered medium-sized unmanned aerial vehicle that was being developed by ARCAspace. There were two variants planned, AirStrato Explorer with a target flight ceiling of 18,000 m and AirStrato Pioneer with a target flight ceiling of 8000 m. It was planned to carry a 45 kg payload consisting of surveillance equipment, scientific instruments or additional battery pods for extended autonomy. The first prototype maiden flight took place on February 28, 2014. It was equipped with a fixed landing gear. Two more prototypes were constructed that lacked a landing gear. Instead ARCA opted for a pneumatic catapult as a launcher and landing skids and a recovery parachute for landing. Both prototypes performed take-off and landing testing and low altitude flights.
Regulation of unmanned aerial vehicles (UAVs) involves setting safety requirements, outlining regulations for the safe flying of drones, and enforcing action against errant users.
An autonomous aircraft is an aircraft which flies under the control of on-board autonomous robotic systems and needs no intervention from a human pilot or remote control. Most contemporary autonomous aircraft are unmanned aerial vehicles (drones) with pre-programmed algorithms to perform designated tasks, but advancements in artificial intelligence technologies mean that autonomous control systems are reaching a point where several air taxis and associated regulatory regimes are being developed.
The TAI Aksungur is an unmanned combat aerial vehicle (UCAV) built by Turkish Aerospace Industries (TAI) for the Turkish Armed Forces. Using existing technology from the TAI Anka series of drones, it is the manufacturer's largest drone with payload capacity for mission-specific equipment. It is intended to be used for long-term surveillance, signals intelligence, maritime patrol missions, or as an unmanned combat aerial vehicle. TAI planned to integrate weapon packages and put the Aksungur into production in early 2020. The first unit was delivered to the Turkish Naval Forces on 20 October 2021.
[4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16]