| RWD 23 | |
|---|---|
 | |
| Role | Trainer |
| Manufacturer | DWL |
| Designer | RWD team |
| First flight | 1938/1939 |
| Status | prototype |
| Primary user | Poland |
| Number built | 1 |
The RWD 23 was a Polish low-wing trainer aircraft of 1938, constructed by the RWD team, that remained a prototype.
| RWD 23 | |
|---|---|
| | |
| Role | Trainer |
| Manufacturer | DWL |
| Designer | RWD team |
| First flight | 1938/1939 |
| Status | prototype |
| Primary user | Poland |
| Number built | 1 |
The RWD 23 was a Polish low-wing trainer aircraft of 1938, constructed by the RWD team, that remained a prototype.
The aircraft was designed in 1938 to fill the gap in the Polish trainer aircraft, by creating a light low-wing trainer. All trainers built in series in Poland to that point were high-wing monoplanes, for example the RWD-8 or the various biplanes. The main designer was Andrzej Anczutin of the RWD bureau. Among the designers were also Bronisław Żurakowski and Tadeusz Chyliński. Chyliński designed the base mount for its engine. [1] The plane was similar to de Havilland Moth Minor, but over 100 kg lighter. Low power output and simple wooden construction would make it cheap and economical in service, and therefore it might replace the RWD-8 in aeroclubs.
The first prototype (registration SP-BPO) was flown in late 1938 or early 1939 in Warsaw by E. Przysiecki. It underwent factory trials in June 1939, then it was given to tests to the Aviation Technical Institute. It was destroyed in the first days of World War II, in September 1939. The plane was found as successful, it could also perform basic aerobatics.
The second improved prototype was under construction when the war broke out, but it was not completed. The LOPP paramilitary organization ordered a series of 10 aircraft, that were not completed due to the war.
Wooden construction low-wing cantilever monoplane, conventional in layout, with a fixed landing gear and open cockpits. Fuselage semi-monocoque, rectangular in cross-section, plywood-covered. Single-piece trapezoid wings with rounded tips, single-spar, plywood (front) and canvas covered, fitted with flaps. Conventional tail of a shape typical to RWD designs, like RWD 8, plywood (fins) and canvas (elevators and rudder) covered. Two open cockpits in tandem, with individual windshields and twin controls. Rear cockpit was raised a bit for a better view. Conventional fixed landing gear with a rear skid, main gear in aerodynamic covers.
62 hp (46 kW) Walter Mikron II inline engine in front, with two-blade wooden propeller. 90 hp (67 kW) Cirrus Minor or 63 hp Avia 3 engines could also to be installed. Fuel tank 45 L in a fuselage, cruise fuel consumption 14 L/h. (
Data fromPolish Aircraft 1893-1939 [2]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The RWD 5 was a Polish touring and sports plane of 1931, a two-seat high-wing monoplane, constructed by the RWD team. It was made famous by its transatlantic flight, being the smallest aircraft to cross the Atlantic.
The RWD-14 Czapla was a Polish army cooperation aircraft, designed in the mid-1930s by the RWD team, and produced in the LWS factory from 1938. A series of 65 aircraft were built and most were used by the Polish Air Force observation squadrons during World War II in 1939.
The LWS-2 was the Polish air ambulance aircraft prototype, designed in the late-1930s in the LWS factory.
The RWD 4 was a Polish sports plane of 1930, constructed by the RWD team.
The RWD 2 was a 1929 Polish single-engine high-wing monoplane sports plane constructed by the RWD team.
The RWD 3 was a 1930 Polish sports aircraft and liaison aircraft prototype, constructed by the RWD team, a single-engine high-wing monoplane.
The RWD 1 was a Polish sports plane of 1928, a single-engine high-wing monoplane constructed by the RWD design team.
The RWD-10 was a Polish aerobatics sports plane, single-seat parasol wing monoplane, used from 1933 to 1939 and constructed by the RWD team.
The RWD 17 was a Polish aerobatics-trainer aircraft of 1937, parasol wing monoplane, constructed by the RWD team.
The PZL-5 was a Polish two-seat touring and sports aircraft of 1930 constructed and produced by the PZL.
The Bartel BM.4 was a Polish biplane primary trainer aircraft used from 1929 to 1939 by the Polish Air Force and Polish civilian aviation, manufactured in the Samolot factory in Poznań. It was the first plane of Polish design put into production.
The Bartel BM 5, initially known as M.5 was a Polish biplane advanced trainer used from 1930 to 1939 by the Polish Air Force, manufactured in the Samolot factory in Poznań.
The JD-2 was a Polish sports plane of 1926. It was the first sports plane designed in Poland, that was built in a small series.
The RWD-16 was a Polish two-seat low-wing sports plane of 1936, constructed by the RWD team, that remained a prototype.
The RWD 16bis and RWD 21 were Polish two-seat low-wing touring and sports planes of the late 1930s, constructed by the RWD bureau, sharing the same construction, main difference of the RWD 21 being a stronger engine.
The RWD-19 was a Polish two-seat low-wing sports aircraft of 1938, constructed by the RWD bureau.
The PWS-50,(PWS - Podlaska Wytwórnia Samolotów - Podlasie Aircraft Factory), was a prototype Polish single-engine mid-wing monoplane sports aircraft of 1930, constructed by Podlaska Wytwórnia Samolotów.
The RWD-11 was a six-passenger feeder-liner designed and built in Poland from 1932.
The RWD 18 was a four/five seat STOL utility aircraft designed and built in Poland from 1936.
The PWS-11 was a Polish aerobatic and trainer aircraft, developed in 1928-1929 by PWS, which remained a prototype.
