Windex | |
---|---|
Saab MERA 1 (Electrically powered Windex 1200C) | |
Role | Glider and Motor glider |
National origin | Sweden |
Manufacturer | Radab WindexAir AB |
Designer | Sven Olof Ridder |
First flight | 1985 (model 1100) |
Status | Out of production[ citation needed ] |
Produced | 1985-1986, 1990- c.2003 |
The Radab Windex is a family of Swedish high-wing, single-seat aerobatic gliders and motor gliders that was designed by Sven Olof Ridder and produced initially by Radab and later by WindexAir AB as a kit for amateur construction. [1] [2] [3]
The initial design was the unpowered model 1100. This was followed by the present production 1200C motorglider. The project started off in 1980 as a hobby design between Sven-Olof Ridder and Harald Undén, who later founded Radab to produce the design. By 1983 they had developed the custom airfoil section and tested it in a wind tunnel. [2]
The first unpowered 1100 model flew in 1985, but the following year, as they geared up for kit production the factory burnt down, including all the fibreglass molds that they had built. Only two 1200 C aircraft kits had been produced before the molds were destroyed. One of these was completed in time to be flown at the 1987 Paris Airshow. [1] [2]
By 1990 the molds had been replaced and the first new 1200 C was completed. The first amateur-built Windex was completed from a kit in 1996. By 1999 WindexAir AB had assumed production from Radab. [2]
The 1200 C is built from a combination of carbon-fiber-reinforced polymer and fibreglass. The aircraft is fully aerobatic and stressed to +9/-6g. The 12.1 m (40 ft) span wing has carbon fibre spars and is of a semi-tapered planform. The wing employs a custom Radab KTH-FFA 17% thickness airfoil and features both Schempp-Hirth-style upper surface air brakes and 22.5% chord flaps for glidepath control. The König SC-430 15 kW (20 hp) two-stroke three-cylinder engine is mounted in tractor configuration and has a variable-pitch, fully feathering propeller. [1] [2] [4] [5]
When it was in production the Windex 1200 C was supplied in three kits, fuselage, wings and engine and propeller. [6]
In 1991 the prototype was flown at the FAI World Glider Aerobatic Championships held at Zielona Góra, Poland, winning two bronze medals. [2]
In August 2011 there were four Windex motor gliders and one glider registered in the United States with the Federal Aviation Administration. All are in the Experimental - Amateur-built category. [7]
Data from Sailplane Directory and company website, [1] [9] Jane's All the World's Aircraft 1988-89 [8]
General characteristics
Performance
The Sequoia Falco is an Italian-designed lightweight 2-seater aerobatic aircraft.
The Zivko Edge 540 manufactured by Zivko Aeronautics is a highly aerobatic aircraft. Capable of a 420 degree per second roll rate and a 3,700 foot per minute climb rate, it has been flown to victory on the international Unlimited aerobatics circuit several times since the mid-1990s. A tandem-seat version is sold as the Edge 540T.
The SZD-45 Ogar (Hound) is a T-tailed cantilever high-wing monoplane of wooden, aluminium and fibreglass construction designed and manufactured in Poland.
The Partenavia P.64B/P.66B Oscar is an Italian two/four-seat, single-engined, high-wing monoplane built by Partenavia.
The Yakovlev Yak-50 aerobatic aircraft is a single-seat all-metal low-wing monoplane with retractable main wheels and exposed tail wheel. The control surfaces are fabric-covered to save weight. The aircraft is not equipped with flaps.
The Mudry CAP 10 is a two-seat training aerobatic aircraft first built in 1970 and still in production in 2007. The plane was developed from the Piel Super Emeraude and was born as the CP100. The name changed to CAP 10, CAP for 'Constructions Aéronautiques Parisiennes'. The CAP 10 was manufactured by Mudry in Bernay, France, bought by CAP Industries which then became Apex Aircraft. Following the bankruptcy of Apex in 2008, rights to produce spares were awarded to Dyn'Aviation. After the bankruptcy of DynAero in 2012, manufacture of spares was taken over by CEAPR in Darois.
The Glaser-Dirks DG-500, and later the DG-505, is a two-seat glider of glass-reinforced plastic and carbon fiber reinforced plastic construction, manufactured in the DG Flugzeugbau GmbH in Bruchsal, Germany. It first flew in 1987.
The Fournier RF 4 is a single-seater motor glider designed by René Fournier in 1966. It is an aerobatic version of the Fournier RF 3.
The Air Est JCD 03 Pelican is a French mid-wing, twin tailed, flying wing single-seat motor glider that was designed by Jean-Claude Debreyer and produced by Air Est Services of Marly, Moselle and supplied as a kit for amateur construction or as a complete aircraft.
The TeST TST-1 Alpin is a Czech shoulder-wing, single-seat, pusher configuration motor glider that was designed and produced by TeST.
The TeST TST-6 Duo is a Czech shoulder-wing, two-seats in side-by-side configuration motor glider that was designed and produced by TeST of Brno.
The TeST TST-7 Junior is a Czech shoulder-wing, single-seat motor glider that was designed and produced by TeST of Brno. When it was available the aircraft was supplied as plans, in kit form for amateur construction or as a complete ready-to-fly aircraft. Production is now complete and the aircraft is no longer available new.
The Alpaero Sirius, also called the Noin Sirius, is a French high-wing, strut-braced, pod-and-boom, cruciform tail, single-seat motor glider that was designed by Claude Noin and produced by his company, Alpaero of Châteauvieux, Hautes-Alpes. It was available as plans for amateur construction and also as a kit, but has been discontinued.
The Stoddard-Hamilton Glasair II is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation as a kit for amateur construction. It was first flown in 1989, and remained in production in 2012.
The Hummel Ultracruiser is an American amateur-built aircraft, designed by Morry Hummel and produced by Hummel Aviation. The aircraft is supplied as a kit or plans for amateur construction or as a complete ready-to-fly aircraft.
national
The Giles G-200 is an American aerobatic homebuilt aircraft that was produced by AkroTech Aviation of Scappoose, Oregon. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft or a kit for amateur construction. The first customer-built aircraft made its first flight on May 26, 1996. AkroTech Aviation went out of business and the design is no longer in production.
The Junkers Profly Ultima is a German aerobatic homebuilt aircraft that was designed by Andre Konig and produced by Junkers Profly of Kodnitz, introduced in 1993. When it was available the aircraft was supplied as a kit for amateur construction.
The Stolp SA-900 V-Star is an American aerobatic homebuilt biplane, currently produced by Aircraft Spruce & Specialty Co in the form of plans for amateur construction. In the 1990s it was also available as a kit from Stolp Starduster Corporation of Riverside, California.
The TeST TST-5 Variant is a Czech homebuilt aircraft that was designed and produced by TeST Gliders of Brno, introduced c. 1998. When it was available the aircraft was supplied as a completely assembled aircraft, without engine or instruments, and also as a kit for amateur construction.