RagWing RW22 Tiger Moth

Last updated • 2 min readFrom Wikipedia, The Free Encyclopedia

RagWing RW22 Tiger Moth
Role Homebuilt aircraft
National origin United States
Manufacturer Ragwing Aircraft Designs
DesignerRoger Mann
First flightJune 1999
Introduction2000
StatusPlans available
Number built1 (December 2000)
Developed from de Havilland Tiger Moth

The RagWing RW22 Tiger Moth is a two-seats-in-tandem, biplane, conventional landing gear, single engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction. [1] [2] [3]

Contents

The RW22 is an 80% scale replica of the de Havilland Tiger Moth and was developed using the original Tiger Moth design as a guide. [1] [2]

Design and development

The RW22 was designed for the US experimental homebuilt aircraft category and was first flown in June 1999. It also qualifies as an Experimental Light-sport aircraft in the USA. [1] [2]

The airframe is constructed from wood and tube and covered with aircraft fabric. The landing gear is of conventional configuration. The aircraft's nominal installed power range is 50 to 100 hp (37 to 75 kW) and the standard engine is the 70 hp (52 kW) 2si 690, although the 60 hp (45 kW) HKS 700E, 50 hp (37 kW) Rotax 503 and the 80 hp (60 kW) Rotax 912UL engine have also been used. [1] [2]

The RW22 was originally available as a complete quick-build kit, less only the engine, but today is only offered as plans and the designer estimates it will take 600 hours to complete the aircraft. [1] [2] [3]

Specifications (RW22)

Data from Kitplanes and RagWing [1] [2]

General characteristics

Performance

Aircraft of comparable role, configuration, and era

Related Research Articles

The Fisher Super Koala is a two-seat, high wing, conventional landing gear, single-engined, light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and strongly resembles that design.

<span class="mw-page-title-main">Fisher FP-404</span> Canadian homebuilt light aircraft

The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

<span class="mw-page-title-main">Fisher Classic</span> Canadian homebuilt light aircraft

The Fisher Classic is a Canadian two-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft is a two-seat derivation of the Fisher FP-404. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher Youngster is a Canadian single-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft was inspired by the German Bücker Bü 133 Jungmeister aerobatic aircraft of the 1930s.

The Freebird II is a family of American side-by-side two-seat, high wing, tricycle gear, pusher configuration single engined kit aircraft originally designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina, and later Pro Sport Aviation of Wingate, North Carolina.

<span class="mw-page-title-main">Murphy Renegade</span> Type of aircraft

The Murphy Renegade is a family of Canadian two-seats-in-tandem, single engine, conventional landing gear, biplanes, produced by Murphy Aircraft and intended for amateur construction.

The Hy-Tek Hurricane 103 is a family of single-engined, high wing tricycle gear-equipped aircraft that were available in kit form from Hy-Tek Hurricane of Aurora, Oregon.

The Capella XS is a family of American high wing, tractor configuration, cabin aircraft that were produced in kit form by Capella Aircraft of Austin, Texas and intended for amateur construction.

<span class="mw-page-title-main">Kolb Firestar</span> Type of aircraft

The Kolb Firestar is a family of American open cockpit, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.

The Kolb Slingshot is an American tandem two seat, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft, that was produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.

<span class="mw-page-title-main">Phantom X1</span> Type of aircraft

The Phantom X1 is a single-engined, tractor configuration, single seat, cable-braced high wing tricycle gear-equipped ultralight aircraft that is produced by Phantom Aeronautics of Three Rivers, Michigan and available in kit form.

The RagWing RW8 PT2S is a single or two seat, high wing, strut-braced, single engine ultralight aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.

<span class="mw-page-title-main">RagWing RW2 Special I</span> Type of aircraft

The RagWing RW2 Special I is a family of biplane, single engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.

The RagWing RW11 Rag-A-Bond is a two-seat, high wing, strut-braced, conventional landing gear, single engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.

The RagWing RW19 Stork is a family of two-seat, high wing, strut-braced, conventional landing gear, single-engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.

<span class="mw-page-title-main">Flying K Sky Raider</span> Family of ultralight aircraft

The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.

<span class="mw-page-title-main">Carlson Sparrow</span> Type of aircraft

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

<span class="mw-page-title-main">Sport Flight Talon</span> Type of aircraft

The Sport Flight Talon is a high-wing, pusher configuration single-engine, conventional landing gear homebuilt aircraft or ultralight aircraft, that was produced by Sport Flight Aviation of Sandy, Oregon in kit form for amateur construction.

<span class="mw-page-title-main">Titan Tornado</span> American kit aircraft

The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.

<span class="mw-page-title-main">SlipStream Genesis</span> Type of aircraft

The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.

References

  1. 1 2 3 4 5 6 Downey, Julia: 2001 Kit Aircraft Directory, Kitplanes, Volume 17, Number 12, December 2000, page 70. Kitplanes Acquisition Company. ISSN 0891-1851
  2. 1 2 3 4 5 6 RagWing Aircraft Designs (2006). "RW22 RagWing Tiger Moth". Archived from the original on May 13, 2008. Retrieved January 10, 2011.
  3. 1 2 RagWing Aircraft Designs (2006). "RagWing Price List". Archived from the original on May 13, 2008. Retrieved December 29, 2010.